Raccord coudé mâle KSL (type standard) Raccord à simple pression rotatif
- En promotion jusqu’au 30/11/2024
[Features]
· Can be used on rotating and oscillating parts of robots, etc.
· Copper-free (with electroless nickel plating).
· Sealant is standard.
· Tube materials: FEP, PFA, nylon, soft nylon, polyurethane.
[Applications]
· Use for piping at right angles from the female thread part.
(i)Remarque
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Male Elbow KSL (Standard Type) Specifications
Male Elbow KSL external view (M5, M6)
Male Elbow KSL dimensional drawing (M5, M6)
Male Elbow KSL external view (R)
Male Elbow KSL dimensional drawing (R)
| Applicable tubing Outer diameter (mm) | Connection thread RM | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 4 | M5 × 0.8 | KSL04-M5 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| M6 × 1 | KSL04-M6 | 21 | |||||||||||
| 1/8 | KSL04-01S | 12 | 21.1 | 23.5 | 14 | ||||||||
| 6 | M5 × 0.8 | KSL06-M5 | 8 | 12.8 | 14 | 23 | 21 | 23.5 | 17 | 2.5 | 3.5 | 3.5 | 12 |
| M6 × 1 | KSL06-M6 | 21.5 | 24 | 3 | 5.0 | 5.0 | |||||||
| 1/8 | KSL06-01S | 14 | 22.1 | 25.5 | 4 | 8.6 | 8.6 | 17 | |||||
| 1/4 | KSL06-02S | 25.5 | 26.5 | 23 | |||||||||
| 8 | 1/8 | KSL08-01S | 17 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL08-02S | 29 | 31 | 29 | |||||||||
| 3/8 | KSL08-03S | 29.9 | 32 | 38 | |||||||||
| 10 | 1/4 | KSL10-02S | 22 | 18.5 | 22 | 31.5 | 33.5 | 37.5 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL10-03S | 33.9 | 38 | 64 | |||||||||
| 1/2 | KSL10-04S | 37.1 | 39.5 | 82 | |||||||||
| 12 | 3/8 | KSL12-03S | 24 | 20.9 | 24 | 34 | 35.4 | 40.5 | 22 | 8 | 35.1 | 35.1 | 76 |
| 1/2 | KSL12-04S | 38.6 | 42 | 93 | |||||||||
Units: mm
* Reference dimensions of R thread after installation
Male Elbow KSL external view (UNF)
Male Elbow KSL dimensional drawing (UNF)
Male Elbow KSL external view (NPT)
Male Elbow KSL dimensional drawing (NPT)
| Applicable tubing outer diameter (inch) | Connection thread UNF NPT | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 5/32 | 10-32UNF | KSL03-32 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| 1/8 | KSL03-34S | 12.7 | 21.1 | 23.5 | 14 | ||||||||
| 1/4 | 1/8 | KSL07-34S | 14.29 | 13.2 | 14 | 23.5 | 22.1 | 25.5 | 17 | 4 | 8.6 | 8.6 | 17 |
| 1/4 | KSL07-35S | 25.5 | 26.5 | 23 | |||||||||
| 5/16 | 1/8 | KSL09-34S | 17.46 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL09-35S | 29 | 31 | 29 | |||||||||
| 3/8 | 1/4 | KSL11-35S | 22.23 | 17.9 | 22 | 31.5 | 33.5 | 37 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL11-36S | 33.9 | 38 | 64 | |||||||||
Units: mm
* Reference dimensions of NPT thread after installation
Structural Drawing
KS Series (Standard Type) Structural Drawing
Specifications
- Usable fluids: Air
- Operating pressure range (Note 1): -100 kPa to +1 MPa
- Proof pressure: 3 MPa
- Ambient and fluid temperature: -5 to +60°C (no freezing)
- Threads: JIS B0203 (taper thread for piping), JIS B0205 (metric coarse thread), ANSI/ASMEB1.20.1 (NPT thread), JIS B0212 (Unified Fine Thread [UNF])
(Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Also, when using in a vacuum, grease may enter the inside due to the nature of its construction.
Rotating Torque / Allowable Number Of Rotations
| Applicable tubing outer diameter | ø4 | ø6 | ø8 | ø10 | ø12 | |
|---|---|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 | 0.022 | |
| Allowable number of rotations (s)-1 Note 3) | KS Series | 8.4 | 8.4 | 6.7 | 5 | 4.2 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
| Applicable Tubing Outer Diameter | ø5/32" | ø1/4" | ø5/16" | ø3/8" |
|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 |
| Allowable number of rotations (s)-1 Note 3) | 8.3 | 8.3 | 6.7 | 5 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
Principle Part Materials
| Principle parts | KS Series |
|---|---|
| Body | PBT |
| Stud, holder, guide | SUS304, C3604 (with electroless nickel plating), PBT |
| Chuck, retainer | SUS304 |
| Collet / Release button / Retaining ring | Polyacetal |
| O-ring/Seal | NBR |
| Rotary seal | NBR |
| Slide bearing | Oil-containing polyacetal |
| Scraper | - |
| Ball bearings | Bearing steel |
| Gasket | SUS304/NBR |
Notes
- *1Ball bearings are used in the rotating parts, so please implement the tube piping in such a way as to avoid lateral load. If there is lateral load applied to ball bearings, then their life expectancy may be affected adversely. Using a flexible polyurethane tube is recommended when lateral load is applied.
- *2Do not use in an environment where it will be exposed to water. Contact with water will cause outflow of the lubricating oil used in the ball bearings, affecting rotating performance and equipment life-span.
- *3Fluorine grease is used on the rotating parts.
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | D.E. 1 de tuyau applicable (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|---|
| - | 13.71 € | 2 | 26 jours | - | UNF | 10-32 | ||
| - | 13.71 € | 2 | 26 jours | - | NPT | 1/8 | ||
13.71 € 9.60 € | 2 |
Jour même
Stock | 4 | R | 1/8 | |||
13.71 € | 2 | 3 jours | 4 | M | 5×0,8 | |||
13.71 € | 2 | 4 jours | 4 | M | 6×1,0 | |||
14.69 € | 2 | 3 jours | 6 | R | 1/8 | |||
14.69 € | 2 | 4 jours | 6 | R | 1/4 | |||
14.34 € | 2 | 4 jours | 6 | M | 5×0,8 | |||
14.34 € | 2 | 4 jours | 6 | M | 6×1,0 | |||
| - | 14.61 € | 2 | 26 jours | - | NPT | 1/8 | ||
| - | 14.69 € | 2 | 26 jours | - | NPT | 1/4 | ||
17.47 € 12.23 € | 2 |
Jour même
Stock | 8 | R | 1/8 | |||
17.47 € | 2 | 3 jours | 8 | R | 1/4 | |||
17.47 € | 2 | 4 jours | 8 | R | 3/8 | |||
| - | 19.40 € | 2 | 4 jours | - | NPT | 1/8 | ||
| - | 19.40 € | 2 | 4 jours | - | NPT | 1/4 | ||
26.13 € | 2 | 3 jours | 10 | R | 1/4 | |||
26.13 € | 2 | 4 jours | 10 | R | 3/8 | |||
26.23 € | 2 | 4 jours | 10 | R | 1/2 | |||
| - | 26.13 € | 2 | 26 jours | - | NPT | 1/4 | ||
| - | 27.89 € | 2 | 4 jours | - | NPT | 3/8 | ||
33.11 € | 2 | 4 jours | - | R | 3/8 | |||
33.11 € 23.18 € | 2 |
Jour même
Stock | - | R | 1/2 |
Loading...
Informations de base
| Type | Simple effet / vis | Type à raccord | Sens de montage par vis | Fluide applicable | Air |
|---|---|---|---|---|---|
| Matériau du corps principal | Laiton | Application | Standard/Mini | Matériau du filetage | PP |
| Packing, Material of O-Ring | EPDM (revêtement en fluorine) | Montage par vis, sens | Coude | Coudes | Raccord union coudé |
| Pour pièce oscillante, pièce rotative | Raccord union coudé tournant pour tube simple effet | Number of Connection Tubes(pc.) | 1 |
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
D.E. 1 de tuyau applicable(φ)
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0,8
- 6×1,0
- 10-32
-
Type
- KSL
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 3 jours ou moins
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.