KQG2H, Raccords instantanés acier inox 316, Raccord droit (Numéros de référence - Téléchargement CAO)
- En promotion jusqu’au 30/11/2024
[Features]
· Compact with reduced weight.
· Non-grease.
· Can be used with steam.
· Metal part: SUS316, Seal part: special FKM.
· Operating fluid temperature: -5 to +150°C
· Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)
[Applications]
· Used for piping in one direction from a female thread.
(i)Remarque
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
KQG2H10-02S
Half Union Fitting: KQG2H Outline Drawing And Dimensions
Metric size type
- Applicable tube: metric size
- Connection thread: M, R, Rc
Half Union Fitting: KQG2H Outline Drawing (With M5)
Half Union Fitting: KQG2H Outline Drawing (With R)
| Applicable tube O.D. (mm) | Connection thread: R, M | Model | H (width across flats) | øDNote 1) | L | A* | M | Effective area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 × 0.8 | KQG2H23-M5 | 8 | 8 | 16.5 | 13.5 | 12 | 3 | 3.3 |
| 1/8 | KQG2H23-01S | 10 | 15.4 | 12.3 | 3.4 | 5.7 | |||
| 1/4 | KQG2H23-02S | 14 | 21 | 16.3 | 16.9 | ||||
| ø4 | M5 × 0.8 | KQG2H04-M5 | 10 | 8.7 | 17.1 | 14.1 | 12.6 | 4 | 5 |
| 1/8 | KQG2H04-01S | 15.3 | 12.2 | 5.6 | 4.7 | ||||
| 1/4 | KQG2H04-02S | 14 | 20.9 | 16.2 | 15.8 | ||||
| ø6 | M5 × 0.8 | KQG2H06-M5 | 12 | 11.1 | 19.1 | 16.1 | 13.6 | 4 | 7.7 |
| 1/8 | KQG2H06-01S | 18.1 | 15 | 13.1 | 7 | ||||
| 1/4 | KQG2H06-02S | 14 | 20.8 | 16.1 | 14.5 | ||||
| 3/8 | KQG2H06-03S | 17 | 23 | 17.9 | 27.3 | ||||
| ø8 | 1/8 | KQG2H08-01S | 14 | 13.4 | 24.5 | 21.4 | 16.1 | 26.1 | 12.8 |
| 1/4 | KQG2H08-02S | 22.3 | 17.6 | 12.9 | |||||
| 3/8 | KQG2H08-03S | 17 | 23.7 | 18.6 | 24.7 | ||||
| ø10 | 1/8 | KQG2H10-01S | 17 | 16.4 | 25.5 | 22.4 | 17 | 26.1 | 18.9 |
| 1/4 | KQG2H10-02S | 27.9 | 23.2 | 41.5 | 21.6 | ||||
| 3/8 | KQG2H10-03S | 23 | 17.9 | 20.6 | |||||
| 1/2 | KQG2H10-04S | 22 | 28.6 | 22.2 | 51.1 | ||||
| ø12 | 1/4 | KQG2H12-02S | 19 | 18.5 | 30.5 | 25.8 | 18.6 | 58.3 | 27.4 |
| 3/8 | KQG2H12-03S | 24.7 | 19.6 | 20.5 | |||||
| 1/2 | KQG2H12-04S | 22 | 28.7 | 22.3 | 44.6 | ||||
| ø16 | 3/8 | KQG2H16-03S | 24 | 24.6 | 33.6 | 28.5 | 20.8 | 81 | 46 |
| 1/2 | KQG2H16-04S | 29.5 | 23.1 | 113 | 37.4 |
*Reference dimensions of R thread after installation
Note 1) øD represents maximum diameter.
Note 2) Values are those when using an FEP tube. Only the values of ø16 are those when using a nylon tube.
Inch size type
- Applicable tube: inch size
- Connection thread: UNF, NPT
Half Union Fitting: KQG2H outline drawing (with 10-32UNF)
Half Union Fitting: KQG2H Outline Drawing (With NPT)
| Applicable tube O.D. (inches) | Connection thread: UNF, NPT | Model | H (width across flats) | øDNote 1) | L | A* | M | Effective area (mm2) Note 2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|
| ø1/8 " | 10-32UNF | KQG2H01-32 | 8 | 8 | 16.5 | 13.5 | 12 | 3 | 3.3 |
| 1/8 | KQG2H01-N01S | 12 | 17.1 | 13.9 | 3.4 | 8.1 | |||
| 1/4 | KQG2H01-N02S | 14 | 20.9 | 16.5 | 16.9 | ||||
| ø5/32 " | 10-32UNF | KQG2H03-32 | 10 | 8.7 | 17.1 | 14.1 | 12.6 | 4 | 5 |
| 1/8 | KQG2H03-N01S | 12 | 17 | 13.8 | 5.6 | 7.6 | |||
| 1/4 | KQG2H03-N02S | 14 | 20.9 | 16.5 | 16.4 | ||||
| ø1/4 " | 10-32UNF | KQG2H07-32 | 12 | 11.2 | 19 | 16 | 13.5 | 4 | 7.5 |
| 1/8 | KQG2H07-N01S | 20 | 16.8 | 13.1 | 8.6 | ||||
| 1/4 | KQG2H07-N02S | 14 | 20.6 | 16.2 | 14.2 | ||||
| 3/8 | KQG2H07-N03S | 19 | 23.8 | 19.1 | 31.4 | ||||
| ø5/16 " | 1/8 | KQG2H09-N01S | 14 | 13.4 | 24.2 | 21 | 16.1 | 26.1 | 12.6 |
| 1/4 | KQG2H09-N02S | 23.1 | 18.7 | 13.9 | |||||
| 3/8 | KQG2H09-N03S | 19 | 24.6 | 19.9 | 28.9 | ||||
| ø3/8 " | 1/8 | KQG2H11-N01S | 17 | 16 | 25 | 21.8 | 16.6 | 26.1 | 19.4 |
| 1/4 | KQG2H11-N02S | 26.3 | 21.9 | 41.5 | 20.3 | ||||
| 3/8 | KQG2H11-N03S | 19 | 23.6 | 18.9 | 25.2 | ||||
| 1/2 | KQG2H11-N04S | 22 | 28.3 | 21.9 | 51.8 | ||||
| ø1/2 " | 1/4 | KQG2H13-N02S | 22 | 19.3 | 30.5 | 26.1 | 18.5 | 58.3 | 36.7 |
| 3/8 | KQG2H13-N03S | 28.4 | 23.7 | 34.4 | |||||
| 1/2 | KQG2H13-N04S | 22 | 43.4 |
*Reference dimensions after screwing in NPT thread.
Note 1) øD is the maximum diameter.
Note 2) Value of FEP tubing.
Stainless Steel 316 One-Touch Pipe Fitting KQG2 Series Common Specifications (Reference)
Applicable tubing
- Tube materials: FEP, PFA, nylon, soft nylonNote 1), polyurethane, polyolefin
- Tube outer diameter (metric size): ø3.2, ø4, ø6, ø8, ø10, ø12, ø16
- Tube outer diameter (inch size): ø1/8, "ø5/32, "ø1/4, "ø5/16, "ø3/8, "ø1/2 "
Note 1) Cannot be used with water when using soft nylon tube.
Specifications
| Usable fluids | Air, water, steamNote 2) Note 3) |
|---|---|
| Operating pressure rangeNote 4) | -100 kPa to 1 MPaNote 5) |
| Proof pressure | 3.0 MPa |
| Ambient and fluid temperatureNote 6) | -5 to 150°C (no freezing)Note 5) |
| Lubricant | Grease-free specifications |
| Seal on the threads | With sealant |
Note 2) Confirm applicable tube separately.
Note 3) Uses special FKM that is resistant to steam.
Note 4) It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.
Note 5) Please confirm operating pressure range and operating temperature range.
Note 6) Please equip an inner sleeve for the following conditions. (ø3.2, ø1/8 "are excluded)
· When using with fluids or in environments that have extreme temperature changes.
· When used with high temperatures.
Temperature conditions for equipping inner sleeve
| Tube used | Temperature |
|---|---|
| FEP tube / TH series | 80°C or more |
| Super PFA tube / TL series | 120°C or more |
Structural Drawing
SUS316 One-Touch Pipe Fitting KQG2 Series Structural Drawing
Components
| Number | Part name | Material |
|---|---|---|
| 1 | Release button | Stainless steel 316 |
| 2 | Guide 1 | Stainless steel 316 |
| 3 | Guide 2 | Stainless steel 316 |
| 4 | Chuck | Stainless steel 316 |
| 5 | Seal | Special FKM (Fluoro coated) |
| 6 | Male connector body | Stainless steel 316 |
| 7 | Male elbow body | Stainless steel 316 |
| 8 | O-ring | Special FKM (Fluoro coated |
| 9 | Stud | Stainless steel 316 |
Référence pièce
|
|---|
| KQG2H10-02S |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | D.E. 1 de tuyau applicable (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
20.65 € | 1 | 3 jours | 10 | R | 1/4 |
Loading...
Informations de base
| Type | Simple effet / vis | Type à raccord | Sens de montage par vis | Fluide applicable | Eau / Air |
|---|---|---|---|---|---|
| Matériau du corps principal | Acier inoxydable (EN 1.4401 équiv.) | Application | Standard/Mini | Matériau du filetage | Acier inoxydable (EN 1.4401 équiv.) |
| Montage par vis, sens | Demi-raccord union | Number of Connection Tubes(pc.) | 1 |
Vous vous trouvez sur la page de KQG2H, Raccords instantanés acier inox 316, Raccord droit, le numéro d'article est le suivant: KQG2H10-02S.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article KQG2H10-02S.
Configurer
Propriétés de base
-
Type
- KQG2H
-
D.E. 1 de tuyau applicable(φ)
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0,8
- 10-32
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 3 jours ou moins
- 4 jours ou moins
- 6 jours ou moins
- 22 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| KQG2H03-32 |
| KQG2H03-N01S |
| KQG2H03-N02S |
| KQG2H10-03S |
| KQG2H10-04S |
| KQG2H11-N01S |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | D.E. 1 de tuyau applicable (φ) | Connection Type | Connection screw |
|---|---|---|---|---|---|---|---|
10.60 € | 1 | 26 jours | - | UNF | 10-32 | ||
14.47 € | 1 | 26 jours | - | NPT | 1/8 | ||
16.35 € | 1 | 26 jours | - | NPT | 1/4 | ||
23.31 € | 1 | 3 jours | 10 | R | 3/8 | ||
29.00 € | 1 | 4 jours | 10 | R | 1/2 | ||
20.65 € | 1 | 26 jours | - | NPT | 1/8 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.