C(D)G3 Vérin pneumatique, double effet, simple tige, Modèle court (CDG3BN20-90F)
Détails du produit:
Référence fabricant: CDG3BN20-90F
Marque: SMC
Prix: 47.32 €
Délai de livraison: 26 jours
Données techniques:
D.I. du cylindre : D: 20 Ø
Course : L: - mm
Specifications: Aimant intégré
Auto Switch: Sans commutateur
Lead Wire Length: - m
(i)Remarque
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
CDG3BN20-90F
Air Cylinder, Short Type, Standard, Double Acting, Single Rod CG3 Series Specifications
Air Cylinder, Short Type, Standard, Double Acting, Single Rod CG3 Series external appearance
JIS symbol (rubber bumper)
Specifications
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|
| Action | Double acting, single rod | ||||||||
| Lubrication | Not required (non-lubricated) | ||||||||
| Fluid | Air | ||||||||
| Proof Pressure | 1.0 MPa | ||||||||
| Maximum operating pressure | 0.7 MPa | ||||||||
| Minimum operating pressure | 0.05 MPa | ||||||||
| Ambient and Fluid Temperature | Without auto switch: -10°C to 70°C (No freezing) | ||||||||
| With auto switch: -10°C to 60°C (No freezing) | |||||||||
| Piston Speed | 50 to 1,000 mm/s | 30 to 700 mm/s | |||||||
| Stroke Length Tolerance | 0 to +1.4 mm | ||||||||
| Cushioning | Rubber cushion | ||||||||
| Mount Support Type | Basic type, foot type, rod-end flange type, head-end flange type, clevis type | ||||||||
| Allowable Kinetic Energy | Rod end male thread | 0.2 J | 0.29 J | 0.46 J | 0.84 J | 1.4 J | 2.38 J | 4.13 J | 6.93 J |
| Rod end female thread | 0.11 J | 0.18 J | 0.29 J | 0.52 J | 0.91 J | 1.54 J | 2.71 J | 4.54 J | |
*Only use the cylinder within the allowable kinetic energy range. See the SMC catalog for details.
Stroke Table
| Tube Inner Diameter (mm) | Standard Stroke (mm)* |
|---|---|
| 20 | 25, 50, 75, 100, 125, 150, 200 |
| 25 | 25, 50, 75, 100, 125, 150, 200, 250, 300 |
| 32 | |
| 40 | |
| 50 | |
| 63 | |
| 80 | |
| 100 |
*Contact the SMC support center regarding intermediate strokes of 1‑mm increments. (Spacers are not used.)
Theoretical Output Table
(Unit: N)
| Tube Internal Diameter D (mm) | Rod Diameter d (mm) | Operating Direction | Piston Area (mm2) | Operating Pressure (MPa) | |||||
|---|---|---|---|---|---|---|---|---|---|
| 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | ||||
| 20 | 8 | OUT | 314 | 62.8 | 94.2 | 125.6 | 157 | 188.4 | 219.8 |
| IN | 264 | 52.8 | 79.2 | 105.6 | 132 | 158.4 | 184.8 | ||
| 25 | 10 | OUT | 491 | 98.2 | 147.3 | 196.4 | 245.5 | 294.6 | 343.7 |
| IN | 412 | 82.4 | 123.6 | 164.8 | 206 | 247.2 | 288.4 | ||
| 32 | 12 | OUT | 804 | 160.8 | 241.2 | 321.6 | 402 | 482.4 | 562.8 |
| IN | 691 | 138.2 | 207.3 | 276.4 | 345.5 | 414.6 | 483.7 | ||
| 40 | 14 | OUT | 1,257 | 251.4 | 377.1 | 502.8 | 628.5 | 754.2 | 879.9 |
| IN | 1,103 | 220.6 | 330.9 | 441.2 | 551.5 | 661.8 | 772.1 | ||
| 50 | 18 | OUT | 1,964 | 392.8 | 589.2 | 785.6 | 982 | 1,178.4 | 1,374.8 |
| IN | 1,709 | 341.8 | 512.7 | 683.6 | 854.5 | 1,025.4 | 1,196.3 | ||
| 63 | 18 | OUT | 3,117 | 623.4 | 935.1 | 1,246.8 | 1,558.5 | 1,870.2 | 2,181.9 |
| IN | 2,863 | 572.6 | 858.9 | 1,145.2 | 1,431.5 | 1,717.8 | 2,004.1 | ||
| 80 | 22 | OUT | 5,027 | 1,005.4 | 1,508.1 | 2,010.8 | 2,513.5 | 3,016.2 | 3,518.9 |
| IN | 4,646 | 929.2 | 1,393.8 | 1,858.4 | 2,323 | 2,787.6 | 3,252.2 | ||
| 100 | 26 | OUT | 7,854 | 1,570.8 | 2,356.2 | 3,141.6 | 3,927 | 4,712.4 | 5,497.8 |
| IN | 7,323 | 1,464.6 | 2,196.9 | 2,929.2 | 3,661.5 | 4,393.8 | 5,126.1 | ||
*Theoretical output (N) = Pressure (MPa) ×; Piston area (mm2).
Weight Table
(Unit: kg)
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|
| Basic weight | Basic type | 0.09 | 0.14 | 0.20 | 0.32 | 0.66 | 0.92 | 1.75 | 2.74 |
| Rod-End Long Type (G) | 0.10 | 0.15 | 0.21 | 0.34 | 0.70 | 0.97 | 1.84 | 2.85 | |
| Rod End Female Thread Type (F) | 0.08 | 0.12 | 0.19 | 0.29 | 0.60 | 0.85 | 1.61 | 2.53 | |
| Additional Bracket Weight | Foot type | 0.11 | 0.13 | 0.16 | 0.22 | 0.48 | 0.72 | 0.96 | 1.75 |
| Flange type | 0.08 | 0.10 | 0.14 | 0.20 | 0.34 | 0.50 | 0.71 | 1.35 | |
| Clevis Type | 0.05 | 0.08 | 0.15 | 0.23 | 0.40 | 0.68 | 0.71 | 1.28 | |
| Pivot bracket | 0.08 | 0.09 | 0.17 | 0.25 | 0.44 | 0.80 | 0.98 | 1.75 | |
| Single Knuckle Joint | 0.05 | 0.09 | 0.09 | 0.10 | 0.22 | 0.22 | 0.39 | 0.57 | |
| Double knuckle joint (with pin) | 0.05 | 0.09 | 0.09 | 0.13 | 0.26 | 0.26 | 0.64 | 1.31 | |
| Additional weight per 50 strokes | 0.05 | 0.07 | 0.09 | 0.13 | 0.19 | 0.23 | 0.31 | 0.43 | |
| Additional Switch Magnet Weight | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.04 | |
Calculation Example) CDG3FN20-100 (built-in magnet, flange type, ø20 mm, 100 stroke)
- Basic weight: 0.09 kg (basic type, ø20 mm)
- Additional bracket weight: 0.08 kg (flange type)
- Additional stroke weight: 0.05 kg / 50 mm
- Air cylinder stroke: 100 mm
- Additional switch magnet weight: 0.01 kg
0.09 + 0.08 + 0.05 ×; (100/50) + 0.01 = 0.28 kg
Mounting Procedure
Mounting procedure for clevis: (ø20 to 63 mm)
Mounting procedure for clevis: (ø80 to 100 mm)
Mounting procedure for rod end nut
- *1: Tighten the clevis bracket mounting bolts to the proper tightening torques detailed below.
ø20 mm: 1.5 N·m, ø25 to 32 mm: 2.9 N·m, ø40 mm: 4.9 N·m
ø50 mm: 11.8 N·m, ø63 to 80 mm: 24.5 N·m, ø100 mm: 42.2 N·m - *2: Mount the flange type and foot type so that the distance 't' (clearance) of the rod end nut is at least 1 mm.
- *3: The direction of the rod end nut (for male thread) when mounting should be with the hexagonal part at the rod end. Apply the wrench to the hexagonal part.
Diagram
With rubber bumper diagram
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | Hard anodized aluminum |
| 2 | Tube Cover | Aluminum alloy | Hard anodized aluminum |
| 3 | Piston | Aluminum alloy | Chromate |
| 4 | Piston rod | Carbon steel* | Hard chrome plated* |
| 5 | Bushing | Resin/Copper alloy (Multiple layers) | - |
| 6 | Bumper A | Resin | - |
| 7 | Damper B | Resin | - |
| 8 | Wear Ring | Resin | - |
| 9 | Rod End Nut | Carbon steel | Nickel plated |
| 10 | Rod seal | NBR | - |
| 11 | Piston Seal | NBR | - |
| 12 | Tube Gasket | NBR | - |
*For cylinders with auto switches, a magnet is attached to the piston.
*The material for ø20 mm and ø25 mm cylinders with auto switches is stainless steel.
Dimensions
(Units: mm)
Basic type / CG3BN tube inner diameter, stroke, with rubber bumper dimensional drawing
Rod-end female thread / Long rod-end male thread dimensional drawing
Foot type / CG3LN tube inner diameter, stroke, with rubber bumper dimensional drawing
- *See the manufacturer's catalog for dimensional drawings and values other than those provided above.
Référence pièce
|
|---|
| CDG3BN20-90F |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | D.I. du cylindre : D (Ø) | Course : L (mm) | Specifications | Auto Switch | Lead Wire Length (m) | Number of Switches | Type of Mount Support | Rod Tip Shape | Type de connecteur | Support de montage de commutateur auto | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
47.32 € | 1 | 26 jours | 20 | - | Aimant intégré | Sans commutateur | - | - | Type de base | Taraudage | - | - |
Loading...
Informations de base
| Méthode de fonctionnement du cylindre | Double effet | Méthode de fonctionnement de la tige | Tiges simples | Forme du corps principal | Standard |
|---|---|---|---|---|---|
| Fonction supplémentaire | Standard | Environnement, applications | Standard | Cushion | Amortisseur en caoutchouc |
| Operating Pressure(MPa) | 0.05 à 0.7 |
Vous vous trouvez sur la page de C(D)G3 Vérin pneumatique, double effet, simple tige, Modèle court, le numéro d'article est le suivant: CDG3BN20-90F.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article CDG3BN20-90F.
Configurer
Propriétés de base
-
Course : L(mm)
-
Lead Wire Length(m)
- 0,5 (Ccnnecteur M8 3 broches)
- 0.5
- 3
- 5
-
Number of Switches
- 1
- 2
- 3
-
Type de connecteur
- Connecteur M8 à 3 broches
- Connecteur M12 à 4 broches
- Aucun
-
Support de montage de commutateur auto
- Disponible
- N/A
-
Type
- CDG3
- CG3
-
D.I. du cylindre : D(Ø)
-
Specifications
- Aimant intégré
- Sans aimant
-
Auto Switch
- H7C
- M9B
- M9BW
- M9NW
- M9P
- M9PW
- B54
- C73C
- A93
- A96
- Sans commutateur
- Sans commutateur auto
-
Type of Mount Support
- Bride côté tête
- Forme de chape
- Pied
- Type de base
- Type pied
- Type à bride côté tige
-
Rod Tip Shape
- Filetage extérieur
- Filetage extérieur long
- Filetage intérieur
- Filetage mâle
- Taraudage
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 16 jours ou moins
- 17 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| CDG3BN100-125 |
| CDG3BN100-125F |
| CDG3BN100-150 |
| CDG3BN25-10 |
| CDG3BN25-100 |
| CDG3BN25-100-A93L |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | D.I. du cylindre : D (Ø) | Course : L (mm) | Specifications | Auto Switch | Lead Wire Length (m) | Number of Switches | Type of Mount Support | Rod Tip Shape | Type de connecteur | Support de montage de commutateur auto |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
209.82 € | 1 | 26 jours | 100 | - | Aimant intégré | Sans commutateur | - | - | Type de base | Filetage extérieur | - | - | ||
209.82 € | 1 | 26 jours | 100 | - | Aimant intégré | Sans commutateur | - | - | Type de base | Taraudage | - | - | ||
217.19 € | 1 | 26 jours | 100 | - | Aimant intégré | Sans commutateur | - | - | Type de base | Filetage extérieur | - | - | ||
43.35 € | 1 | 26 jours | 25 | - | Aimant intégré | Sans commutateur | - | - | Type de base | Filetage extérieur | - | - | ||
49.40 € | 1 | 4 jours | 25 | 100 | Aimant intégré | Sans commutateur | - | - | Type de base | Filetage mâle | - | - | ||
93.11 € | 1 | 26 jours | 25 | - | Aimant intégré | A93 | 3 | 2 | Type de base | Filetage extérieur | - | - |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.