MK-Z Brides pivotantes, Standard avec rainure de fixation du détecteur (MKB12-10RZ-M9NL)
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- En promotion
Détails du produit:
Référence fabricant: MKB12-10RZ-M9NL
Marque: SMC
Prix: 186.23 €
Délai de livraison: 26 jours
Données techniques:
Cylinder Dia.: 12 Ø
Stroke S: 10 mm
Rod Tip Shape: Female Thread
Support Type: [Trou traversant, deux extrémités taraudées (commun)] Trou traversant・Deux côtés communément taraudés (standard)
Additional Function: No (Standard)
(i)Remarque
- Refer to the catalog for details on product specifications.
- The products shown in the image are representative. CAD data is not supported for some model numbers.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
MKB12-10RZ-M9NL
Rotary Clamp Cylinder, Standard Type, MK Series Details
Rotary Clamp Cylinder, Standard Type, MK Series: product images
Rotary Clamp Cylinder, Standard Type, MK Series Specifications
| Bore size (mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
|---|---|---|---|---|---|---|---|---|
| Action | Double acting type | |||||||
| Rotary angle Note 1) | 90° ±10° | |||||||
| Rotary direction Note 2) | Left, right | |||||||
| Rotary stroke (mm) | 7.5 | 9.5 | 15 | 19 | ||||
| Clamp stroke (mm) | 10, 20, 30 | 10, 20, 30, 50 | ||||||
| Theoretical clamping force (N) Note 3) | 40 | 75 | 100 | 185 | 300 | 525 | 825 | 1,400 |
| Applicable fluids | Air | |||||||
| Proof pressure | 1.5 MPa | |||||||
| Operating pressure range | 0.1 to 1 MPa | 0.1 to 0.6 MPa Note 4) | ||||||
| Ambient and fluid temperature | Without auto switch: -10 to 70°C (no freezing) With auto switch: -10 to 60°C (no freezing) | |||||||
| Lubrication | Non-lube | |||||||
| Piping port size | M5 × 0.8 | Rc 1/8, NPT1/8 G1/8 | Rc1/4, NPT1/4 G1/4 | |||||
| Mounting | Through-hole / Both ends tapped common, head flange | |||||||
| Cushion | Rubber bumper | |||||||
| Stroke length tolerance | +0.6 -0.4 | |||||||
| Piston speed Note 5) | 50 to 200 mm/s | |||||||
| Non-rotating accuracy (clamp part) Note 1) | ±1.4° | ±1.2° | ±0.9° | ±0.7° | ||||
- *Note 1) Refer to the rotary angle diagram.
- *Note 2) Direction of rotation viewed from the rod end when the piston rod is retracted.
- *Note 3) Indicates the clamping force at a pressure of 0.5 MPa.
- *Note 4) When using within a pressure range from 0.61 to 1 MPa, use the -X2071.
- *Note 5) Be sure to connect a speed controller to the cylinder, and adjust the cylinder speed so that it is within the range of 50 to 200 mm/s. Make sure the valve is in the fully closed position and then gradually open the valve to adjust the speed of the speed controller.
Rotary angle diagram
Rotary angle diagram
Model Number Notation
Model number example
Individual Made-to-Order Specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -X2071 | Maximum operating pressure: 1.0 MPa specification |
| -X2094 | Overall length is the same as for the MK2 Series |
| -X2172 | Head side with spigot |
| -X2177 | Head flange dimensions are equivalent to the dimensions of the pre-existing MK, MK2 Series |
| -X2997 | Rotary angle: 60° specification |
Made to order specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -XB6 | Heat-resistant cylinder (-10 to 150°C) without auto switch only Note 1) |
| -XC22 | Seal type: fluororubber Note 2) |
- *Note 1) Except ø12 (diameter 12 mm), ø16 (diameter 16 mm).
- *Note 2) The damper is a standard product.
Structural Drawings
Rotary Clamp Cylinder, Standard Type, MK Series: structural drawings
Component Parts
| Number | Part name | Materials | Additional notes |
|---|---|---|---|
| 1 | Cylinder tube | Aluminum alloy | Hard anodized |
| 2 | Rod cover | Aluminum alloy | Hard anodized |
| 3 | Piston | Aluminum alloy | - |
| 4 | Magnet holder | Aluminum alloy | - |
| 5 | Piston rod | Stainless steel | ø12 to 25 (diameter 12 to 25 mm), nitriding |
| Carbon steel | ø32 to 63 (diameter 32 to 63 mm) heat treated, nickel plated | ||
| 6 | Bushing | Copper bearing material | Use only ø32 to 63 (diameter 32 to 63 mm) |
| 7 | Stop ring | Stainless steel | Use only ø20 to 32 (diameter 20 to 32 mm) |
| 8 | Round type R retaining ring | Carbon tool steel | Use only ø12 (diameter 12 mm), ø16 (diameter 16 mm) |
| 9 | Type C retaining ring | Carbon tool steel | Use only ø40 to 63 (diameter 40 to 63 mm) |
| 10 | Hex socket head set screw | Chrome molybdenum steel | Sharp end section 90° |
| 11 | Guide pin | Stainless steel | Nitriding |
| 12 | O-ring | NBR | - |
| 13 | Round type R retaining ring | Carbon tool steel | Except ø12 (diameter 12 mm), ø16 (diameter 16 mm) |
| 14 | Coil scraper | Phosphor bronze | Except ø12 (diameter 12 mm), ø16 (diameter 16 mm) |
| 15 | Scraper presser | Stainless steel | Except ø12 (diameter 12 mm), ø16 (diameter 16 mm) |
| 16 | Head cover | Rolled steel | Electroless nickel plated |
| 17 | Type C retaining ring | Carbon tool steel | Use only ø20 to 32 (diameter 20 to 32 mm) |
Component Parts
| Number | Part name | Materials | Additional notes | |
|---|---|---|---|---|
| 18 | Bumper | Urethane | - | |
| 19 | Bumper B | Urethane | Use only ø12 (diameter 12 mm), ø16 (diameter 16 mm) | |
| 20 | Magnet | - | - | |
| 21 | Wear ring | Resin | Except ø12 (diameter 12 mm), ø16 (diameter 16 mm) | |
| 22 | Rod seal | NBR | - | |
| 23 | Piston seal | NBR | - | |
| 24 | Gasket | NBR | - | |
| 25 | O-ring | NBR | Use only ø20 to 32 (diameter 20 to 32 mm) | |
| 26 | Arm | Rolled steel | - | |
| 27 | Hex socket head cap screw | Chrome molybdenum steel | - | |
| 28 | Spring washer | Hard steel | - | |
| 29 | Clamp bolt | Chrome molybdenum steel | - | |
| 30 | Hex nut | Rolled steel | - | |
| 31 | Flange | Rolled steel | Rod flange is not compatible with the head flange | |
| 32 | Hex socket head cap screw | Chrome molybdenum steel | Quantity | ø12 (diameter 12 mm), ø16 (diameter 16 mm), ø32 to 40 (diameter 32 to 40 mm): 4 pcs. |
| ø20 (diameter 20 mm), ø25 (diameter 25 mm): 2 pcs. | ||||
Replacement Parts / Seal Kit
| Bore size (mm) | ø12 (diameter 12 mm) | ø16 (diameter 16 mm) | ø20 (diameter 20 mm) | ø25 (diameter 25 mm) | ø32 (diameter 32 mm) | ø40 (diameter 40 mm) | ø50 (diameter 50 mm) | ø63 (diameter 63 mm) |
|---|---|---|---|---|---|---|---|---|
| Order number | CQSB12-PS | CQSB16-PS | MK20Z-PS | MK25Z-PS | MK32Z-PS | MK2T40-PS | MK2T50-PS | MK63Z-PS |
| Contents | Set of above numbers (22), (23), (24) | Set of above numbers (14), (22), (23), (24) | ||||||
- *The seal kit is 1 set of the numbers indicated in the table. Order the seal kit based on the order numbers for each tube bore size.
- *The seal kit does not include a grease pack, so please order a grease pack separately. Grease pack part number: GR-S-010 (10 g)
Replacement Parts / Guide Pin Kit
| Bore size (mm) | ø12 (diameter 12 mm) | ø16 (diameter 16 mm) | ø20 (diameter 20 mm) | ø25 (diameter 25 mm) | ø32 (diameter 32 mm) | ø40 (diameter 40 mm) | ø50 (diameter 50 mm) | ø63 (diameter 63 mm) |
|---|---|---|---|---|---|---|---|---|
| Order number | MK12Z-GS | MK16Z-GS | MK20Z-GS | MK25Z-GS | MK32Z-GS | MK40Z-GS | MK50Z-GS | MK63Z-GS |
| Contents | A set of (10), (11), (12) listed above | |||||||
- *The guide pin kit is 1 set of the numbers indicated in the table. Order the seal kit based on the order numbers for each tube bore size.
- *Refer to the manufacturer's operating manual for the replacement procedure for the replacement parts and seal and guide pin kits.
Rotary Clamp Cylinder, Standard Type, MK Series Dimensions
(Unit: mm)
Through hole / Both ends tapped common (basic type): dimensional drawing
| Model | A | B | C | D | E | F | H | øYh9 |
|---|---|---|---|---|---|---|---|---|
| MKB12-Z | 25 | 32 | 15.5 | 5 | M3 × 0.5 | 5.5 | 6 | 11 (-0.043 to 0) |
| MKB16-Z | 29 | 38 | 20 | 7 | M5 × 0.8 | 6.5 | 8 | 14 (-0.043 to 0) |
| Model | Rod state | Clamp stroke | |||||
|---|---|---|---|---|---|---|---|
| 10 mm | 20 mm | 30 mm | |||||
| Q | R | Q | R | Q | R | ||
| MKB12-Z | Retracted | 68 | 45.5 | 88 | 55.5 | 108 | 65.5 |
| Extended | 85.5 | 115.5 | 145.5 | ||||
| MKB16-Z | Retracted | 68 | 45.5 | 88 | 55.5 | 108 | 65.5 |
| Extended | 85.5 | 115.5 | 145.5 | ||||
- *Note) The above figure is with the auto switch D-M9□ mounted.
Référence pièce
|
|---|
| MKB12-10RZ-M9NL |
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Cylinder Dia. (Ø) | Stroke S (mm) | Rod Tip Shape | Support Type | Additional Function | Max. Pressure (MPa) | Clamping Force (kN) | Rotating Direction | Auto Switch | Lead Wire Length (m) | Number of Switches | Port Screw Type | Fabrication conforme aux spécifications de la commande | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
186.23 € | 1 | 26 jours | 12 | 10 | Female Thread | [Trou traversant, deux extrémités taraudées (commun)] Trou traversant・Deux côtés communément taraudés (standard) | No (Standard) | 1 | 0.04 | Droite | M9N | 3 | 2 | Filetage M | Aucun |
Loading...
Informations de base
| Operation Method | Move Turning | Rod Motion | Double Acting Piece Rod | Rotation Angle θ | 90°±10° |
|---|---|---|---|---|---|
| Specifications | Aimant intégré | Mounting surface position | Montage sur plusieurs faces |
Configurer
Propriétés de base
-
Type
- MK
- MKB
-
Cylinder Dia.(Ø)
-
Stroke S(mm)
-
Rod Tip Shape
- Female Thread
- Autres
-
Support Type
- Bride côté tige
- Head side flange
- Trou traversant, deux extrémités taraudées (commun)
-
Additional Function
- No (Standard)
- Avec bras
-
Max. Pressure(MPa)
-
Clamping Force(kN)
-
Rotating Direction
- Droite
- Gauche
-
Auto Switch
- P3DWA
- P4DW
- P5DW
- F7P
- M9B
- M9BA
- M9BAV
- M9BV
- M9BW
- M9BWV
- M9N
- M9NV
- M9NW
- M9NWV
- M9P
- M9PA
- M9PV
- M9PW
- A73
- A73C
- A73H
- A76H
- A90V
- A93
- A93V
- A96
- A96V
- Sans commutateur
- Sans détecteur (accessoires de montage inclus)
-
Lead Wire Length(m)
- 0,5 (type SC)
- 0,5 (connecteur M8 à 3 broches)
- 0,5 (connecteur M12 à 4 broches A-Cord [clé normale])
- 0.5
- 1
- 1 (connecteur M8 à 3 broches)
- 1 (connecteur M8 à 4 broches)
- 3
- 5
-
Number of Switches
- 1
- 2
-
Port Screw Type
- Filetage M
- G
- NPT
- Rc
-
Fabrication conforme aux spécifications de la commande
- Vérin résistant au froid (-10 à 150°C) sans détecteur uniquement
- Spécification pression de fonctionnement maximale 1,0 MPa
- La longueur totale est la même que celle des la Série MK2
- Les cotes de la bride arrière sont équivalentes à celles des Séries MK, MK2 préexistantes
- Aucun
- Côté arrière avec embout mâle
- Joint en élastomère fluoré
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 3 jours ou moins
- 4 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 22 jours ou moins
- 26 jours ou moins
- 31 jours ou moins
- 98 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.