Cam action indexing plungers, Plunger pin protruded (Numéros de référence - Téléchargement CAO)
- Remise sur volume
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
712-6-M16X1,5-A
Informations de base
| Collet thread d2 | M 16 x 1,5 |
|---|
Configurer
Propriétés de base
-
Type
-
Bolt diameter d1(Ø)
-
Type
- A, without rest position, without locknut
- AK, without rest position, with locknut
- R, with rest position, without lock nut
- RK, with rest position, with lock nut
- S, with safety-rest position, without lock nut
- SK, with safety-rest position, with lock nut
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.