Lifting eye bolts (rotating), Stainless Steel
- Remise sur volume
Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
581.5-M20
GN 581.5 / Stainless Steel-Lifting Eye Bolts (Rotating)
Information
Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
see also...
• Lifting eye bolts (rotating) GN 581 (Steel)
How to Order
How to order | 1 | d1 |
Specification
• Ring
Stainless Steel
- German Material No. 1.4462
- Forged
- 100% electro magnetic tensile tested to EN 1677
- Blank
• Bolt
Stainless Steel
German Material No. 1.4462
• Stainless Steel characteristics
• RoHS compliant
Stainless Steel
- German Material No. 1.4462
- Forged
- 100% electro magnetic tensile tested to EN 1677
- Blank
• Bolt
Stainless Steel
German Material No. 1.4462
• Stainless Steel characteristics
• RoHS compliant
Dimensions
| d1 | d2 | d3 | d4 | d5 | h | k1 | k2 | Length l | Nominal load (WLL) |
| M 12 | 18 | 30 | 32 | 30 | 57 | 12 | 56 | 18 | 0.5 t [ 5 kN] |
| M 16 | 22 | 35.5 | 38 | 35 | 66 | 14 | 65 | 24 | 1.0 t [10 kN] |
| M 20 | 27.5 | 41.5 | 47 | 40 | 76 | 16 | 74 | 30 | 2.0 t [20 kN] |
| M 24 | 33 | 50 | 56 | 48 | 94 | 19 | 92 | 35 | 2.5 t [25 kN] |
Method of Mounting
| Method of mounting |  |  |  |  |  |  |  |  | ||
| Number | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 3 and 4 | 3 and 4 | 3 and 4 |
| Angles of inclination | 0° | 90° | 0° | 90° | 0 to 45° | 45 to 60° | asymm. | 0 to 45° | 45 to 60° | asymm. |
| Factor | 1 | 1 | 2 | 2 | 1.4 | 1 | 1 | 2.1 | 1.5 | 1 |
| M 12 | 1.20 [ 0.34] | 0.50 t | 2.40 [0.68] | 1.00 t | 0.70 [0.24] | 0.50 t | 0.50 t | 1.06 t | 0.75 t | 0.50 t |
| M 16 | 2.40 [0.70] | 1.00 t | 4.80 [1.40] | 2.00 t | 1.42 [0.50] | 1.00 t | 1.00 t | 2.12 t | 1.50 t | 1.00 t |
| M 20 | 3.60 [1.20] | 2.00 t | 7.20 [2.40] | 4.00 t | 2.83 [0.86] | 2.00 t | 2.00 t | 4.24 t | 3.00 t | 2.00 t |
| M 24 | 5.20 [1.80] | 2.50 t | 10.40 [3.60] | 5.00 t | 3.53 [1.29] | 2.50 t | 2.50 t | 5.30 t | 3.75 t | 2.50 t |
Safety Instructions
The loads given in brackets refer to the load capacity of the corresponding Stainless Steel-Lifting eye bolts DIN 580. If such a value is not indicated the use of the Stainless Steel-Lifting eye bolts DIN 580 is not permitted!
The bolt-on surface for the Stainless Steel-Lifting eye bolts GN 581.5 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.
Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.
Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.
The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of -40° C to + 280° C. Load-bearing capacity under different conditions upon request.
Operating instructions with more details and specifications are included with every delivery
(see also www.ganter-griff.com/service).
The bolt-on surface for the Stainless Steel-Lifting eye bolts GN 581.5 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.
Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.
Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.
The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of -40° C to + 280° C. Load-bearing capacity under different conditions upon request.
Operating instructions with more details and specifications are included with every delivery
(see also www.ganter-griff.com/service).
Référence pièce
|
|---|
| 581.5-M20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Thread d1 | Weight | |
|---|---|---|---|---|---|---|
283.40 € | 1 | Disponible | 7 jours | M 20 | 0.520 |
Loading...
Vous vous trouvez sur la page de Lifting eye bolts (rotating), Stainless Steel, le numéro d'article est le suivant: 581.5-M20.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article 581.5-M20.
Configurer
Propriétés de base
-
Type
- 581.5
-
Thread d1
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| 581.5-M12 |
| 581.5-M16 |
| 581.5-M24 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Thread d1 | Weight |
|---|---|---|---|---|---|---|
182.42 € | 1 | Disponible | 7 jours | M 12 | 0.200 | |
221.16 € | 1 | Disponible | 7 jours | M 16 | 0.333 | |
391.22 € | 1 | Disponible | 7 jours | M 24 | 0.912 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.