Locking pins with axial lock, Steel (114.2-10-60)
- Remise sur volume
Détails du produit:
Référence fabricant: 114.2-10-60
Marque: GANTER
Prix: 12.46 €
Délai de livraison: 7 jours
Données techniques:
Bolt diameter d1: 10
Length l1: 60
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
114.2-10-60
GN 114.2 / Locking Pins with Axial Lock (Pawl)
Information
Locking pins with axial lock GN 114.2 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.
The rectangular pawls made of stainless steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
see also...
• List of lock pin types
• Locking pins GN 214.2 (with lifting ring)
How to Order
How to order | 1 | d1 |
| 2 | l1 |
Specification
Steel
Zinc plated, blue passivated
• Pawl
Stainless Steel AISI 304 (sheet metal)
• Knob
Plastic (Polyamide PA)
- Black-grey
- Temperature resistant up to 80 °C
• Push button / Slide
Plastic
- Push button: red
- Temperature resistant up to 80 °C
• Spring
Stainless Steel AISI 301
• Stainless Steel characteristics
• Plastic characteristics
• RoHS compliant
Accessory
• Retaining cables GN 111.2
• Spiral retaining cables GN 111.4
Dimensions
 |  | ||||||||||||||||||
| d1 −0.1 | l1 +0.4 | a | b | d2 | d3 | d4 | d5 | l2 | l3 | Load in kN ≈ | |||||||||
| Minimum size | (Double sided shear force) | ||||||||||||||||||
| See information | |||||||||||||||||||
| 6 | 10 | 12 | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 2.3 | 0.5 | 7.5 +0.5 | 5.9 | 15 | 30 | 7 | 21 | 14 |
| 8 | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | - | - | 2.8 | 0.6 | 10 +0.5 | 7.9 | 15 | 30 | 8.4 | 21 | 28 |
| 10 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | - | - | 3.3 | 1 | 12 +1 | 9.9 | 18 | 34 | 9.8 | 26 | 38 |
| 12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | - | 3.8 | 1 | 14 +1 | 11.9 | 18 | 34 | 11.3 | 26 | 61 |
| 16 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | - | - | 4.3 | 1.2 | 19 +1 | 15.9 | 22 | 40 | 14.2 | 32 | 113 |
| 20 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | - | - | 4.3 | 1.2 | 23 +1 | 19.8 | 25 | 40 | 14.8 | 33 | 187 |
Référence pièce
|
|---|
| 114.2-10-60 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Bolt diameter d1 | Length l1 | |
|---|---|---|---|---|---|---|
12.46 € | 1 | Disponible | 7 jours | 10 | 60 |
Loading...
Configurer
Propriétés de base
-
Type
-
Bolt diameter d1
- 6
- 8
- 10
- 12
- 16
- 20
-
Length l1
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.