Spring plungers, press on type (Numéros de référence - Téléchargement CAO)
- En promotion
- Remise sur volume
Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
A tolerance of H7 for the location hole of d1 is recommended.
Due to different production methods, the dimensions l2 and l3 are different.
A tolerance of H7 for the location hole of d1 is recommended.
Due to different production methods, the dimensions l2 and l3 are different.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
614-8-NI
GN 614 / Spring Plungers, Press On Type, with Ball
Information
Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
A tolerance of H7 for the location hole of d1 is recommended.
Due to different production methods, the dimensions l2 and l3 are different.
see also...
• Stainless Steel-Spring plungers GN 614.3 (with ball, without thread)
• Spring plungers GN 614.2 (Press on type, ball double ended)
How to Order
How to order | 1 | d1 |
| 2 | Material |
Specification
NI MS KU KD • Housing and ball Stainless Steel- AISI 305 / 420C
- Housing sheet-metal
- Ball hardened
• Housing brass
- turned
- Ball
Stainless Steel AISI 420C, hardened
• Housing plastic (Polyacetal POM)
- temperature resistant up to 50 °C
- Ball
Stainless Steel AISI 420C, hardened
• Housing and ball plastic
(Polyacetal POM)
temperature resistant up to 50 °C
• Spring
Stainless Steel AISI 631
• Stainless Steel characteristics
• Plastic characteristics
• RoHS compliant
Dimensions
 | |||||||||||||||
| d1 +0.1 | d2 | d3 | l1 ≈ | l2 ≈ | l3 ±0.1 | w Compression | Spring load in N ≈ | ||||||||
| NI | KD | MS | NI | KU | NI | KU | NI | MS | NI | MS | Specification NI / MS | Specification KU / KD | |||
| KU | MS | KD | MS | KD | KU | KU | initial | end | initial | end | |||||
| KD | KD | ||||||||||||||
| 3 | - | 3 | 2.4 | 2 | 3.5 | 4 | 4 | 0.75 | 0.6 | 0.7 | 0.6 | 1.8 | 3.5 | 1.7 | 3.6 |
| 4 | 4 | 4 | 3 | 3 | 4.6 | 5 | 5 | 0.9 | 1 | 1 | 0.8 | 2.5 | 6 | 2.5 | 6.5 |
| 5 | 5 | 5 | 4 | 4 | 5.6 | 6 | 6 | 0.9 | 1 | 1.4 | 1 | 3 | 6.5 | 4.5 | 9 |
| 6 | 6 | 6 | 5 | 5 | 6.5 | 7 | 7 | 1 | 1 | 1.8 | 1.6 | 5.5 | 11.5 | 6.5 | 13 |
| 8 | 8 | 8 | 6.5 | 6.5 | 8.5 | 9 | 9 | 1.1 | 1 | 2.4 | 1.9 | 7 | 12.5 | 8 | 18 |
| 10 | 10 | - | 8.5 | 8 | 11 | 13 | 13.5 | 1.5 | 1.5 | 3.3 | 2.4 | 8.5 | 18.5 | 12 | 23 |
| 12 | 12 | - | 10 | 10 | 13 | 16 | 16 | 2.3 | 1.5 | 4 | 3.3 | 12 | 26.5 | 13 | 25 |
Référence pièce
|
|---|
| 614-8-NI |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Diameter d1 | Material | |
|---|---|---|---|---|---|---|
1.62 € | 1 | Disponible | 7 jours | 8 | NI, Stainless Steel |
Loading...
Configurer
Propriétés de base
-
Type
-
Diameter d1
- 3
- 4
- 5
- 6
- 8
- 10
- 12
-
Material
- KD, Plastic Housing and Ball
- KU, Plastic Housing and Stainless Ball
- MS, Brass
- NI, Stainless Steel
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.