Stainless Steel- Angled ball joints
- Remise sur volume
Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.
The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Référence pièce
|
|---|
| 71802-10-M6-CN |
| 71802-10-M6-CSN |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Thread d2 | Bore d1 | Left hand thread d2 | Type | |
|---|---|---|---|---|---|---|---|---|
16.78 € | 1 | Disponible | 4 jours | M6 | 10 | - | CN- with threaded ball shank without safety catch | |
17.36 € | 1 | Disponible | 4 jours | M6 | 10 | - | CSN- with threaded ball shank with safety catch |
Loading...
Configurer
Propriétés de base
-
Bore d1
-
Left hand thread d2
-
Type
- CN- with threaded ball shank without safety catch
- CSN- with threaded ball shank with safety catch
-
Type
-
Thread d2
- M5
- M6
- M8
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.