Tommy screws, with fixed bar (Numéros de référence)
- En promotion
- Remise sur volume
The thrust point of these screws DIN 6304 is designed to be used with or without a thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
Hint for installation (Type F)
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust point is then offered up to the split end of the circlip at the lowest possible angle and pressed home.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
Hint for installation (Type F)
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust point is then offered up to the split end of the circlip at the lowest possible angle and pressed home.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
6304-M10-70-E
- Données produit
- Données CAO non disponibles
Configurer
Propriétés de base
-
Type
-
Length l(mm)
-
Connection thread d1
- M 6
- M 8
- M 10
- M 12
- M 16
- M 20
-
Type
- F, with thrust pad DIN 6311
- E, without thrust pad
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.