Universal joint shafts with needle bearing (Numéros de référence - Téléchargement CAO)
- Remise sur volume
It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
GN 808.3 / Universal Joint Shafts with Needle Bearing, with Longitudinal Compensation
Information
Universal joint shafts with needle bearing GN 808.3 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EW) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings → ← have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.
see also...
• Universal joints with friction bearing GN 808.2
How to Order
| How to order | 1 | d1 |
| 2 | Bore code | |
 | 3 | d2 (s) |
| 4 | l1 - l2 |
Specification
• Steelblank
• Joint bearing areas, pins
case hardened
• Keyway JS9 DIN 6885
• Cross holes GN 110.1
• ISO-Fundamental tolerances
• RoHS compliant
On Request
• Bores without keyway
• Bores with square
• With other or unequal bores
Dimensions
 |  |  | ||||||||
| d1 | d2 H7 | l1 - l2 | d3 | l3 | l5 | t +1 | ||||
| Bore | Guide length | max. assembly length | ||||||||
| of the shaft | ||||||||||
| 22 | K 10 | 140-30 | 160- 40 | 180- 60 | - | 22 | 30 | 48 | 12 | |
| 25 | K 12 | 160-30 | 180- 45 | 200- 70 | 250-105 | 26 | 40 | 56 | 13 | |
| 28 | K 14 | 170-30 | 200- 60 | 220- 80 | 280-140 | 29 | 40 | 60 | 13 | |
| 32 | K 16 | 190-30 | 240- 80 | 275-115 | 380-210 | 32 | 40 | 68 | 16 | Permissible r.p.m. / torque / |
| 36 | K 18 | 230-50 | 270-100 | 290-110 | 400-220 | 37 | 40 | 74 | 17 | Selection of the size → See catalog |
| 42 | K 20 | 250-50 | 320-120 | 420-220 | - | 42 | 45 | 82 | 18 | |
| 45 | K 22 | 270-50 | 330-100 | 470-240 | - | 47 | 50 | 95 | 22 | |
| 50 | K 25 | 295-50 | 350-100 | 420-170 | - | 52 | 50 | 108 | 26 | |
| 58 | K 30 | 330-50 | 400-110 | - | - | 58 | 60 | 122 | 29 |
Référence pièce
|
|---|
| 808.3-22-K10-140-30 |
| 808.3-22-K10-160-40 |
| 808.3-22-K10-180-60 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Bore d2 (Ø) | Outside diameter d1 (Ø) | l1 - l2 | |
|---|---|---|---|---|---|---|---|
474.82 € | 1 | Disponible | 7 jours | 10 | 22 | 140-30 | |
477.22 € | 1 | Disponible | 7 jours | 10 | 22 | - | |
486.16 € | 1 | Disponible | 7 jours | 10 | 22 | - |
Loading...
Informations de base
| Bore code | K, with keyway |
|---|
Configurer
Propriétés de base
-
l1 - l2
- 140-30
- 160-30
- 170-30
- 190-30
- 230-50
- 250-50
- 270-50
- 295-50
- 330-50
-
Type
-
Bore d2(Ø)
-
Outside diameter d1(Ø)
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
- 32 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.