IZH10, Appareil de mesure électrostatique portatif
[Features]
· Electrostatic meter with superior portability.
· Compact and lightweight: 85 g (excluding dry cell batteries).
· Peak and bottom value display function.
· Reset function.
· Auto power-off function.
· Low battery indicator.
· Backlit display is easy to read even in the dark.
(i)Remarque
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not available for some models.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Handheld Electrostatic Meter, IZH10 Series Detailed Example
IZH10 product image
Handheld Electrostatic Meter, IZH10 Series Features
Peak/Bottom Display Function
- Detects and updates the maximum and minimum electrostatic potential value during measurement.
- Allows the display value to be held at the maximum or minimum electrostatic potential value.
Reset Function
- Measured static electricity charge reading can be adjusted to zero.
- Reading can be corrected within ±5% F.S. of the factory settings.
Low Battery Indicator
- Two-stage low battery indicator: "Battery LOW" and "Replace Battery."
- The battery level when the battery is low is indicated by a flashing or lit-up "L" on the display.
Auto Power-Off Function
- If no buttons are operated for 5 minutes or more, the power supply will switch off automatically.
- When the "POWER" button is pressed down for 6 seconds or more with the power supply off, the time until auto power-off when no buttons are pressed is extended to 15 minutes.
Backlight Lighting
- Display can be seen easily in the dark.
- Switch between backlight on and backlight off with each press of the "LIGHT" button.
Displayed Digit Change Function
- When the static electricity charge voltage is between -0.99 kV and +0.99 kV, the minimum display digit is automatically changed.
Handheld Electrostatic Meter, IZH10 Series Specifications
| Item | IZH10 | |
|---|---|---|
| Rated Charge Amount Range | ±20.0 kV | |
| Minimum Display Unit | 0.1 kV (±1.0 kV to ±20.0 kV), 0.01 kV (0 to ±0.99 kV) | |
| Measurement Distance | 50 mm (between sensor part and measurement object) | |
| Power Supply*1 | 1.5 V DC AA alkaline dry cell batteries × 2 (continuous use for 15 hours or more*2) | |
| Display Accuracy | ±5% F.S. ±1 digit | |
| Environmental Resistance | Enclosure | IP40 |
| Operating Temperature Range | Operating: 0 to 40°C, Stored: -10 to 60°C (no freezing or condensation) | |
| Operating Humidity Range | Operating/Stored: 35 to 85% R.H. (no condensation) | |
| Vibration Resistance | 10 to 150 Hz at amplitudes and accelerations smaller than 1.5 mm and 98 m/s2 respectively, in X, Y and Z directions (de-energized) | |
| Impact Resistance | 100 m/s2 in X, Y, Z directions 3 times each (de-energized) | |
| Material | Display part: PC/ABS, Sensor part: ABS | |
| Weight | 85 g (excluding dry cell batteries) | |
| Standards | CE marking | |
| Accessories | Ground wire, soft case | |
- *1: AA alkaline dry cell batteries are not included and must be acquired separately.
- *2: When new alkaline dry cell batteries are used at normal temperature.
Handheld Electrostatic Meter, IZH10 Series Dimensions
Display Part
(Unit: mm)
Display part dimensional drawing
Sensor Part
(Unit: mm)
Sensor part dimensional drawing
Référence pièce
|
|---|
| IZH-A-01 |
| IZH-B-01 |
| IZH-C-01 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Type | Indicateurs | Fonction supplémentaire | Options | Accessoires/options : à commander séparément | |
|---|---|---|---|---|---|---|---|---|---|
21.50 € | 1 | 39 jours | Composants associés | - | - | - | Fil de mise à la terre (1,5 m) | ||
21.50 € | 1 | 39 jours | Composants associés | - | - | - | Étui souple | ||
12.10 € | 1 | 39 jours | Composants associés | - | - | - | Poignée de mesure haute tension |
Loading...
Informations de base
| Fonction de réglage de l'équilibre ionique | Non fourni |
|---|
Configurer
Propriétés de base
-
Indicateurs
- État chargé / déchargé
-
Fonction supplémentaire
- Non fourni
-
Options
- Aucun
- Poignée de mesure haute tension
-
Accessoires/options : à commander séparément
- Fil de mise à la terre (1,5 m)
- Poignée de mesure haute tension
- Étui souple
-
Type
- IZH-
- IZH10
-
Type
- Dispositifs de mesure antistatiques
- Composants associés
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 26 jours ou moins
- 31 jours ou moins
- 39 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.