Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Multi-Channel Digital Pressure Sensor Controller PSE200 Series product image
Model number example
Model | PSE200 | PSE201 | |
---|---|---|---|
Power supply voltage | 12 to 24 V DC ±10%, Ripple (p-p) 10% or less (with reverse connection protection) | ||
Current Consumption | 55 mA or less (Current consumption for sensor is not included) | ||
Power supply voltage for sensor | [Power supply voltage] -1.5 V | ||
Power supply current for sensorNote 1) | Maximum 40 mA (100 mA maximum for the total power supply when 4 sensors are input) | ||
Sensor input | - | 1 to 5 V DC (Input impedance: approx. 800 kΩ) | |
Number of inputs | 4 inputs | ||
Input protection | With excess voltage protection (Up to 26.4 V) | ||
Switch output | - | NPN open collector output: 5 outputs (Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output) | PNP open collector output: 5 outputs (Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output) |
Max Load Current | 80 mA | ||
Maximum applied voltage | 30 V | - | |
Residual Voltage | 1 V or less (with load current of 80 mA) | ||
Response time | 5 ms or less (Response time selections with anti-chattering function: 20 ms, 160 ms, 640 ms) | ||
Short-circuit protection | Equipped | ||
Repeat accuracy | ±0.1% F.S. ±1 digit | ||
Hysteresis | Hysteresis mode | Adjustable (can be set from 0) | |
Window comparator mode | Fixed (3 digits) | ||
Display Method | For measured value display: 4-digit 7-segment display, Display color: orange (Sampling frequency: 4 times / sec) For channel display: 1-digit 7-segment display, Display color: red | ||
Display accuracy (at an operating temperature of 25°C) | ±0.5% F.S. ±1 digit | ||
Status LEDs | Red (lights up when output is turned ON) | ||
Auto-shift input | Non-voltage input (reed or solid state), Input 10 ms or more, Independently controllable auto-shift function ON/OFF | ||
Auto-identification function | With auto-identification functionNote 2) | ||
Environmental resistance | Enclosure | Front face: IP65 (when panel mounted), Others: IP40Note 3) | |
Ambient temperature range | During operation: 0 to 50°C, During storage: -10 to 60°C (No condensation or freezing) | ||
Ambient humidity range | When operating/stored: 35 to 85% RH (no condensation) | ||
Temperature characteristics | ±0.5% F.S. (25°C reference) | ||
Connection | Power supply / output connection: 8P connector, Sensor connection: e-con | ||
Material | Housing: PBT, Display: transparent nylon, Back rubber cover: CR | ||
Weight | 60 g (excluding power supply / output connection cable) | ||
Power supply / Output connection cable | Heat-resistant heavy-duty cable, 8 cores ø4.8 (4.8‑mm diameter) 2 m, Conductor area: 0.15 mm2 Insulator O.D.: 0.9 mm | ||
Standard | CE / CSA |
Note 1) If the Vcc and 0 V side of the sensor input connector are short circuited, the inside of the controller will be damaged.
Note 2) Auto-identification function comes with the "PSE53□ Series" only. Other series made by the same manufacturer (PSE540, 560, 570) are not equipped with this function.
Note 3) IP40 specification when using the □48 conversion adapter.
PSE200-(M)□
PSE201-(M)□
(Unit: mm)
PSE200/PSE201 dimensional drawing
Multi-Channel Digital Pressure Sensor Controller PSE200 Series (Front Protective Cover + Panel-Mount Adapter) dimensional drawing
Référence pièce
|
---|
ZS-26-01 |
ZS-26-B |
ZS-26-C |
ZS-26-D |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Details Type | |
---|---|---|---|---|---|
4.52 € | 1 | 12 jours | Capot de protection avant | ||
6.61 € | 1 | 7 jours | Adaptateur de montage sur panneau | ||
11.03 € | 1 | 22 jours | Capot de protection avant + adaptateur pour montage sur panneau | ||
21.26 € | 1 | 39 jours | Adaptateur de conversion □ 48 |
Loading...
Type | Raccords en métal |
---|
Configurer
Propriétés de base
Details Type
Type
Filtrer par jours d'expédition standard
Propriétés optionnelles