VCHC40, Clapet antiretour 5.0 MPa
(i)Remarque
- Les images de produits peuvent être des images représentatives. Se référer au catalogue pour plus de détails
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
5.0 MPa Check Valve, VCHC40 Series Specifications
VCHC40 Series external appearance
VCHC40 Series symbol
VCHC40 Series features
| Model | VCHC40 | |
|---|---|---|
| Operating pressure | 0.05 to 5.0 MPa | |
| Cracking pressure | 0.05 MPa | |
| Orifice diameter | ø16 (orifice diameter 16 mm) | |
| Flow rate characteristics | C value (effective cross-sectional area) | 28 dm3/(s/bar) (140 mm2) |
| b | 0.15 | |
| Cv | 7.4 | |
| Fluid | Air | |
| Fluid temperature | 5 to 80°C | |
| Ambient temperature | 5 to 80°C | |
| Body material | Brass | |
| Sealing material | Polyurethane elastomer | |
| Port size | G3/4, 1 (Conforming to ISO 1179-1 on the pneumatic/hydraulic G thread) | |
| Mounting orientation | Unrestricted | |
| Weight | 1.02 kg | |
Structure drawing
VCHC40 Series Structure Drawing
| Number | Part name | Material |
|---|---|---|
| 1 | Body | Brass |
| 2 | O-ring | NBR |
| 3 | Piston | Aluminum + hard anodized aluminum |
| 4 | Poppet | Polyurethane elastomer |
| 5 | Set screw | Stainless steel |
| 6 | O-ring | NBR |
| 7 | Nut | Stainless steel |
| 8 | Guide ring | Resin |
| 9 | Spring | Stainless steel |
| 10 | Plate | Steel + electroless nickel plated |
| 11 | Hexagon socket head cap screw (with SW) | Carbon steel |
Drawings
(Units: mm)
VCHC40 dimensional drawing 1
VCHC40 dimensional drawing 2
VCHC40 dimensional drawing 3
Precautions
Selection
Applicable fluids
- *Corrosive gas: Do not use corrosive gas as it may cause corrosive stress cracks and other problems.
Piping
Wrapping the sealing tape (when R screw is installed)
Wrapping the Sealing Tape
- *Sealing tape is not required as this product uses a pneumatic and hydraulic purpose G thread which conforms to ISO 1179-1.
- *When an R (taper) thread is used, leave 1 to 2 threads exposed at the tip before winding the sealing thread around it 4 to 5 times.
Always tighten threads with the proper tightening torque
*When attaching fittings to valves, tighten with the proper tightening torque shown below.
- Connection threads (G, Rc 3/4): Proper tightening torque 28 to 30 N·m
- Connection threads (G, Rc 1): Proper tightening torque 36 to 38 N·m
Operating environment
- *Do not use in locations with an explosive atmosphere.
- *Implement suitable protective measures in locations exposed to water, oil or spatter from soldering, etc.
Maintenance and inspection
Storage
- *In the case of long term storage after use, first thoroughly remove all moisture to prevent rust and deterioration of rubber materials.
Référence pièce
|
|---|
| VCHC40-06G |
| VCHC40-10G |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Plage de pression de fonctionnement (MPa) | Section effective (mm2) | Connection Dia. | |
|---|---|---|---|---|---|---|---|
276.68 € | 1 | 22 jours | - | - | 3/4 | ||
276.68 € | 1 | 26 jours | 0,05 à 5,0 | 140 | 1 |
Loading...
Informations de base
| Type | Pilot-Operated | Forme du corps principal | Elbow | Matériau du corps principal | Laiton |
|---|---|---|---|---|---|
| Matériau du joint | Caoutchouc nitrile | Côté admission, type de port P | Female Thread | Côté sortie, type de port A | Female Thread |
| Section effective [classification](㎜2) | Jusqu'à 200 | Types of Screw | G |
Configurer
Propriétés de base
-
Section effective(mm2)
-
Connection Dia.
-
Type
- VCHC40
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 22 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.