JC, Joint de compensation, Standard, Léger
· Use of a lightweight aluminum case has reduced the weight by 30% (compared to JA40)
· Quality suitable for air cylinders
· Absorbs any misalignment between the workpiece and the cylinder
· Mounting is interchangeable with the current JA series
(i)Remarque
- Les images de produits peuvent être des images représentatives. Reportez-vous au catalogue pour plus de détails.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
JC Series Floating Joint, Light Weight Type For Light Load Specifications
JC Series Floating Joint external appearance
JC Series Floating Joint operating range
| Model | Application Cylinder tube bore size (mm) | Compatible cylinder nominal thread size | Maximum operating tension and compression force (N) | Allowable eccentricity U (mm) | Rotating angle |
|---|---|---|---|---|---|
| Basic type | |||||
| Standard / Thread nominal size | |||||
| JC20-8-125 | 20 | M8 ×; 1.25 | 300 | 0.5 | ±5 ° |
| JC30-10-125 | 25, 32 | M10 ×; 1.25 | 800 | 0.5 | |
| JC40-14-150 | 40 | M14 ×; 1.5 | 1,250 | 0.75 | |
| JC63-18-150 | 50/63 | M18 ×; 1.5 | 3,100 | 1 | |
| Semi-standard / Thread nominal size | |||||
| JC20-8-100 | 20 | M8 ×; 1 | 300 | 0.5 | ±5 ° |
| JC25-10-150 | 25 | M10 ×; 1.5 | 800 | 0.5 | |
| JC32-10-100 | 32 | M10 ×; 1 | 800 | 0.5 | |
| JC40-12-125 | 32/40 | M12 ×; 1.25 | 1,250 | 0.75 | |
| JC40-12-150 | 40 | M12 ×; 1.5 | 1,250 | 0.75 | |
| JC40-12-175 | 32/40 | M12 ×; 1.75 | 1,250 | 0.75 | |
| JC50-16-150 | 50 | M16 ×; 1.5 | 3,100 | 1 | |
| JC63-16-200 | 50/63 | M16 ×; 2 | 3,100 | 1 | |
(Standard Type / Pneumatic: Up to 1 MPa) Dimensions
(Unit: mm)
JC Series Floating Joint dimensional drawing
| Model | Application cylinder bore size | M | A | B | D | E | F | G | H | Center of sphere R | Maximum thread depth P | Allowable eccentricity U | Maximum operating tensile and compressive force N | Weight kg | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal diameter | Pitch | ||||||||||||||
| JC20-8-125 | 20 | 8 | 1.25 | 44 | 17.5 | 21 | 4.5 | 7 | 7 | 13 | 30.5 | 8 | 0.5 | 300 | 0.03 |
| JC30-10-125 | 25/32 | 10 | 1.25 | 49.5 | 19.5 | 24 | 5 | 8 | 8 | 17 | 34 | 9 | 0.5 | 800 | 0.05 |
| JC40-14-150 | 40 | 14 | 1.5 | 60 | 20 | 31 | 6 | 11 | 11 | 22 | 38 | 13 | 0.75 | 1,250 | 0.12 |
| JC63-18-150 | 50/63 | 18 | 1.5 | 74.5 | 25 | 41 | 7.5 | 14 | 13.5 | 27 | 47.5 | 15 | 1 | 3,100 | 0.23 |
Diagram
JC Series Floating Joint Diagram
| Number | Description | Material | Note |
|---|---|---|---|
| 1 | Stud | Steel | Manganese phosphate |
| 2 | Case | Aluminum | Chromate |
| 3 | Ring | Steel | - |
| 4 | Cap | Steel | Black zinc chromated |
| 5 | Dust cover | Synthetic rubber | - |
| 6 | Set screw | Steel | Zinc chromate |
| 7 | Rod end nut | Steel | Zinc chromate |
| 8 | Washer | Steel | - |
Rod-end Nut (Accessory) dimensional drawing
(Unit: mm)
Rod-end nut dimensional drawing
| Model | d: thread nominal size | H | B | C |
|---|---|---|---|---|
| JC20-8-100 | M8 ×; 1 | 5 | 13 | 15 |
| JC20-8-125 | M8 ×; 1.25 | 5 | 13 | 15 |
| JC32-10-100 | M10 ×; 1 | 6 | 17 | 19.6 |
| JC30-10-125 | M10 ×; 1.25 | 6 | 17 | 19.6 |
| JC25-10-150 | M10 ×; 1.5 | 6 | 17 | 19.6 |
| JC40-12-125 | M12 ×; 1.25 | 7 | 19 | 21.9 |
| JC40-12-150 | M12 ×; 1.5 | 7 | 19 | 21.9 |
| JC40-12-175 | M12 ×; 1.75 | 7 | 19 | 21.9 |
| JC40-14-150 | M14 ×; 1.5 | 8 | 22 | 25.4 |
| JC50-16-150 | M16 ×; 1.5 | 10 | 24 | 27.7 |
| JC63-16-200 | M16 ×; 2 | 10 | 24 | 27.7 |
| JC63-18-150 | M18 ×; 1.5 | 11 | 27 | 31.2 |
Precautions
- *When screwing the male threads of the rod into the female threads of the socket or the case, make sure that the rod does not bottom out.
- *The dust cover may stick to the stud. Move the dust cover at the base of the stud with your fingers, or twist the stud right and left gently to free it.
- *When using a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take measures to prevent loosening, such as using a locking pin or thread adhesive.
- *This product is dedicated to linear motion. The threaded portion can be rotated, but this product is not a rotary joint. It cannot be used for rotational applications.
- *Use the product at 25% or less of the allowable kinetic energy of the cylinder. *Be sure to use the cushion mechanism of the cylinder or a buffer mechanism such as a shock absorber to prevent impact force being applied to the floating joint when stopping the driven body. If there is no buffer mechanism, an impact force is generated that may cause the floating joint to exceed its maximum tensile and compressive force level, leading to breakage.
- *Do not use if the product has been disassembled. High-strength adhesive is applied to the portion of the connection that is threaded to prevent it from loosening. The product must therefore not be disassembled. If the product is forcefully disassembled, it could lead to damage.
- *See the manufacturer's catalog for product information other than the above.
Référence pièce
|
|---|
| JC20-8-100 |
| JC20-8-125 |
| JC25-10-150 |
| JC30-10-125 |
| JC32-10-100 |
| JC40-12-125 |
| JC40-12-150 |
| JC40-12-175 |
| JC40-14-150 |
| JC50-16-150 |
| JC63-18-150 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Filetage de connexion nominal M (mm) | Filetage de connexion nominal P (mm) | Max. Force de traction de fonctionnement (kN) | Désalignement U admissible (mm) | Taille d'alésage de vérin applicable (ø) | Filetage nominal de vérin applicable | |
|---|---|---|---|---|---|---|---|---|---|---|
26.76 € | 1 | 26 jours | M3 à M8 | 1 à 1,75 | 0.3 | 0.5 | 20 | M8 × 1 | ||
26.76 € | 1 | 4 jours | M3 à M8 | 1 à 1,75 | 0.3 | 0.5 | 20 | M8 × 1.25 | ||
27.87 € | 1 | 26 jours | M10 à M18 | 1 à 1,75 | 0.8 | 0.5 | 25 | M10 × 1.5 | ||
27.87 € | 1 | 4 jours | M10 à M18 | 1 à 1,75 | 0.8 | 0.5 | 25/32 | M10 × 1.25 | ||
27.87 € | 1 | 26 jours | M10 à M18 | 1 à 1,75 | 0.8 | 0.5 | 32 | M10 × 1 | ||
35.69 € | 1 | 26 jours | M10 à M18 | 1 à 1,75 | 1.25 | 0.75 | 32/40 | M12 × 1.25 | ||
35.69 € | 1 | 26 jours | M10 à M18 | 1 à 1,75 | 1.25 | 0.75 | 40 | M12 × 1.5 | ||
35.69 € | 1 | 26 jours | M10 à M18 | 1 à 1,75 | 1.25 | 0.75 | 32/40 | M12 × 1.75 | ||
36.81 € | 1 | 4 jours | M10 à M18 | 1 à 1,75 | 1.25 | 0.75 | 40 | M14 × 1.5 | ||
50.18 € | 1 | 4 jours | M10 à M18 | 1 à 1,75 | 3.1 | 1 | 50 | M16 × 1.5 | ||
51.31 € | 1 | 4 jours | M10 à M18 | 1 à 1,75 | 3.1 | 1 | 50/63 | M18 × 1.5 |
Loading...
Informations de base
| Type | Joints flottants | Cylindre utilisé | Cylindre pneumatique | Type de connexion, côté cylindre | Taraudé |
|---|---|---|---|---|---|
| Type de connexion, côté pièce à usiner | Filetages | Matériau du corps principal | Acier | Tête métallique | Non fourni |
| Matériau du goujon | Acier | Plage de températures de fonctionnement(°C) | -10::70 | Désalignement angulaire admissible V(deg) | ±5 |
Configurer
Propriétés de base
-
Filetage de connexion nominal M(mm)
- M3 à M8
- M10 à M18
-
Désalignement U admissible(mm)
-
Taille d'alésage de vérin applicable(ø)
- 20
- 25
- 25/32
- 32
- 32/40
- 40
- 50
- 50/63
-
Filetage nominal de vérin applicable
- M8 × 1
- M8 × 1.25
- M10 × 1
- M10 × 1.25
- M10 × 1.5
- M12 × 1.25
- M12 × 1.5
- M12 × 1.75
- M14 × 1.5
- M16 × 1.5
- M16 × 2
- M18 × 1.5
-
Type
-
Filetage de connexion nominal P(mm)
- 1 à 1,75
- 2 à 2,5
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.