ALIP1000 / 1100, Lubrificateur à impulsion
· Intermittent discharge of small yet constant amounts to the sliding parts.
· Directly supplies a constant amount of oil just before the lubrication point.
(i)Remarque
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
ALIP1000/1100 Series Impulse Lubricator Specifications
ALIP1000-01 JIS symbol
ALIP1100-01 JIS symbol
| Model | ALIP1000-01 | ALIP1100-01 |
|---|---|---|
| Port size Rc (nominal size) | 1/8 (6A) | |
| Proof pressure | 1.0 MPa | |
| Operating pressure range for signal pressure | 0.25 to 0.7 MPa | |
| Pressure range for oilNote 1) | 0 to 0.4 MPa | 0.15 to 0.4 MPa |
| Oil viscosityNote 1) | 2 to 460 cst (40°C) | |
| Ambient temperature and working fluid temperature | 5 to 50°C | |
| Oil feeding volume (1 shot)Note 2) | 0 to 0.04 cm3 | |
| Weight (kg) | 0.22 | |
| Mounting orientation | OIL OUT upward | No restriction |
Note 1) Determine the oil pressure and port size based on the piping length and oil viscosity, referring to the operation manual.
Note 2) The oil feeding volume adjustment range is 0.003 to 0.04 cm3. The set oil feeding volume at the time of shipment is 0.02 cm3.
Outline dimensional drawing
(Unit: mm)
Impulse lubricator: ALIP1□00-01 dimensional drawing
(Unit: mm)
Impulse lubricator manifold: ALIM1□00-2, -4, -6, -8, -10 dimensional drawing
(Unit: mm)
Impulse lubricator manifold: ALIM1□00-3, -5, -7, -9 dimensional drawing
(Unit: mm)
| Part number | Impulse lubricator model | No. of stations | L | L1 |
|---|---|---|---|---|
| ALIM1000-2 | ALIP1000-01 | 2 | 68 | 60 |
| ALIM1100-2 | ALIP1100-01 | |||
| ALIM1000-4 | ALIP1000-01 | 4 | 116 | 108 |
| ALIM1100-4 | ALIP1100-01 | |||
| ALIM1000-6 | ALIP1000-01 | 6 | 164 | 156 |
| ALIM1100-6 | ALIP1100-01 | |||
| ALIM1000-8 | ALIP1000-01 | 8 | 212 | 204 |
| ALIM1100-8 | ALIP1100-01 | |||
| ALIM1000-10 | ALIP1000-01 | 10 | 260 | 252 |
| ALIM1100-10 | ALIP1100-01 | |||
| ALIM1000-3 | ALIP1000-01 | 3 | 116 | 108 |
| ALIM1100-3 | ALIP1100-01 | |||
| ALIM1000-5 | ALIP1000-01 | 5 | 164 | 156 |
| ALIM1100-5 | ALIP1100-01 | |||
| ALIM1000-7 | ALIP1000-01 | 7 | 212 | 204 |
| ALIM1100-7 | ALIP1100-01 | |||
| ALIM1000-9 | ALIP1000-01 | 9 | 260 | 252 |
| ALIM1100-9 | ALIP1100-01 |
*The specifications are the same as the impulse lubricator specifications.
Piping Example
Intermittent Lubrication and Constant Amount of Oil Dropping to the Friction Part of Machines, Such as Gears
No pressurized tank example
Pressurized tank example
Lubrication to Pneumatic Equipment Such as Air Cylinders
No pressurized tank example
Pressurized tank example
Operating Principle
ALIP1000/1100 Series Working Principle
In the figure above, when pilot air enters the inlet side of piston (1), piston (1) overcomes piston spring (2) and pushes oil into the pump chamber. At this time steel ball (5) is pushed downward and closes the oil entry passage.
The volume of oil in the pump chamber, equivalent to (the cross sectional area of the pump chamber intrusion piston) ×; (the piston stroke), pushes open check valve (3) and is discharged from the outlet side.
After the oil discharge finishes, check valve (3) closes the outlet side passage using check valve spring (4).
After the pilot air is released, piston (1) recovers by using piston spring (2), steel ball (5) is pulled upward, and new oil flows into the pump chamber from the oil entry passage.
Rotate handle (6) and change the stroke of piston (1) to adjust the volume of oil discharged. Turning the handle left will increase the discharge volume, while turning to the right will decrease it. The movement of the piston can be confirmed visually by using indicator (7).
Precautions
Adjustment
- *1 At the time of shipment, the impulse lubricator is set to an oil discharge volume of 0.02 cm3, but when necessary, this can be adjusted by pulling the handle to release the lock, then rotating the handle.
- *2Rotating the handle to the right will reduce the volume of discharge, while rotating it to the left will increase it. One revolution of the handle will change the discharge volume by only about 0.007 cm3. After adjustment, push the handle back in to lock it.
Lubrication
- *1After supplying oil to the oil tank, a large volume of air bubbles will be mixed in with the oil, so either wait for the air bubbles to dissipate, or use vacuum suction to remove the bubbles before using the equipment.
- *2If air enters the interior of the impulse lubricator pump chamber, oil will cease to be discharged; if this happens, be sure to release the air.
- *3Never screw any plug, etc. into the OIL OUT side of the impulse lubricator.
Other precautions
*See the manufacturer's catalog for product information other than the above.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Type | Nombre de postes | Modèle de lubrificateur à impulsion applicable | Pression d'alimentation en huile | |
|---|---|---|---|---|---|---|---|---|
482.68 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | Double | ALIP1000-01 | Aucun | ||
660.98 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | Triple | ALIP1000-01 | Aucun | ||
839.15 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 4 postes | ALIP1000-01 | Aucun | ||
1,017.39 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 5 postes | ALIP1000-01 | Aucun | ||
1,195.61 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 6 postes | ALIP1000-01 | Aucun | ||
1,373.90 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 7 postes | ALIP1000-01 | Aucun | ||
1,552.16 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 8 postes | ALIP1000-01 | Aucun | ||
1,730.39 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 9 postes | ALIP1000-01 | Aucun | ||
1,908.63 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 10 postes | ALIP1000-01 | Aucun | ||
482.68 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | Double | ALIP1100-01 | Aucun | ||
660.89 € | 1 | 98 jours | Distributeur d’appareil de lubrification à impulsion | Triple | ALIP1100-01 | Aucun | ||
839.15 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 4 postes | ALIP1100-01 | Aucun | ||
1,017.39 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 5 postes | ALIP1100-01 | Aucun | ||
1,195.61 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 6 postes | ALIP1100-01 | Aucun | ||
1,552.08 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 8 postes | ALIP1100-01 | Aucun | ||
1,908.63 € | 1 | 26 jours | Distributeur d’appareil de lubrification à impulsion | 10 postes | ALIP1100-01 | Aucun | ||
178.90 € | 1 | 4 jours | Lubrificateur à impulsion | 1 poste | Aucun | Non pressurisé, pressurisé | ||
178.90 € | 1 | 22 jours | Lubrificateur à impulsion | 1 poste | Aucun | Pressurisé |
Loading...
Informations de base
| Type | Dispositif de lubrification |
|---|
Configurer
Propriétés de base
-
Type
- Distributeur d’appareil de lubrification à impulsion
- Lubrificateur à impulsion
-
Nombre de postes
- 1 poste
- 4 postes
- 5 postes
- 6 postes
- 7 postes
- 8 postes
- 9 postes
- 10 postes
- Double
- Triple
-
Modèle de lubrificateur à impulsion applicable
- ALIP1000-01
- ALIP1100-01
- Aucun
-
Pression d'alimentation en huile
- Aucun
- Non pressurisé, pressurisé
- Pressurisé
-
Type
- ALIM1000
- ALIM1100
- ALIP1000
- ALIP1100
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 22 jours ou moins
- 26 jours ou moins
- 98 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.