Moyeu ROTEX® (020195102200)

Moyeu ROTEX® 020195102200

Cliquez sur cette image pour l'agrandir.

Cliquez sur cette image pour l'agrandir.

  • Moyeu ROTEX® 020195102200
  • Moyeu ROTEX® 020195102200
  • Moyeu ROTEX® 020195102200
  • Moyeu ROTEX® 020195102200
  • Moyeu ROTEX® 020195102200
  • Moyeu ROTEX® 020195102200

Détails du produit:

Référence fabricant: 020195102200

Marque: KTR_SYSTEMS

Prix: 18.92

Délai de livraison: 3 jours


Données techniques:

Diam. extérieur A: 40 mm

Type de produit: ROTEX 19 ST

Taille: 19

Matériau: Acier

Version: Avec rainure


Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

020195102200

ROTEX® Flexible Jaw Couplings

Hub Types

Due to the numerous applications of ROTEX® for many different applications and mounting situations, this coupling system is available with various hub types. These types mainly differ in that they offer either positive or frictionally engaged connections, but mounting situations like, for example, gear shafts with integrated transmission cams or similar applications are covered, too.
Type 1.0 hub
with feather keyway and setscrew

Positive locking power transmission, permissible torque depending on the permissible surface pressure. Not suitable for backlash-free power transmission with heavily reversing operation.

Type 1.1 hub
without feather keyway with setscrew
Non-positive torque transmission for crimp and glued connections. (No ATEX-release)

Type 1.3 hub
with spline bore (see page 20)
 Type 2.0 clamping hub
single slotted without feather keyway

Frictionally engaged, backlash-free shaft-hub-connection-.
Transmittable torques depending on bore diameter (see
page 34). (For ATEX category 3 only)

Type 2.1 clamping hub
single slotted with feather keyway
Non-positive torque transmission for crimp and glued connections.
(No ATEX-release)
Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids
or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.

Type 2.3 clamping hub
with spline (see page 29/30)
     
Type 4.2 hub
with CLAMPEX® clamping set KTR 250

Frictionally engaged, backlash-free shaft-hub-connection for the transmission of average torques.

Type 4.1 for CLAMPEX® clamping set KTR 200
type 4.3 for CLAMPEX® clamping set KTR 400
Frictionally engaged, backlash-free shaft-hub-connection for the transmission of high torques.
 Type 6.0 clamping ring hub
(see ROTEX® GS series)

Integrated frictionally engaged shaft-hub-connection for the transmission of higher torques. Screwing on elastomer side.
For details about torque and dimensions see page 29. Suitable for high speeds.

Type 6.5 clamping ring hub
(see ROTEX® GS series)
Design like 6.0, except for clamping screws externally. As an example for radial disassembly of intermediate pipe (special design).
     
Type 7.5 clamping hub type DH
without feather keyway for
double-cardanic connection

Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only)

Type 7.6 clamping hub type DH
with feather keyway for
double-cardanic connection
Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.
 Type 7.8 clamping hub type H
without feather keyway

Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only)

Type 7.9 clamping hub type H
with feather keyway
Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.
     
Type 7.0 SPLIT hub
without feather keyway

Split hub made of cast iron. Frictionally engaged, backlashfree shaft-hub-connection-. Transmittable torques depending on bore diameter (For ATEX category 3 only)
 Type 7.1 SPLIT hub
with feather keyway

Split hub made of cast iron. Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced.
     
FNN hub
Coupling hub to be connected to an attachment such as
brake drum, brake disk and fan.
 SD hub shifting hub
Coupling hub for separating or switching on the driving/ driven machine with standstill of the machine. Can be combined with slip ring and shiftable linkage.
     
TB1 hub/TB2 hub
Coupling hub for taper clamping bushes. TB1 screwed on
cam side. TB2 screwed externally.
 Type 3Na + 4N
Driving flange with flange type K
For type AFN and BFN:
With type AFN the spider can be replaced while being assembled without having to disassemble the driving and driven side.
     
Mitnehmerflansch Ausf. 3b
Driving flange to connect to customer’s component. Abmessungen siehe Seite 38
 Mitnehmerflansch Ausf. 3Na
Driving flange to connect to customer’s component. Abmessungen siehe Seite 38
Référence pièce
020195102200
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Diam. extérieur A
(mm)
Type de produit Taille Matériau Version Diamètre
(mm)
Adaptation Vitesse max.
(tr/min)
déplacement axial admissible
(mm)
désalignement radial admissible
(mm)
déplacement angulaire admissible
(°)
l1, l2
(mm)
E
(mm)
Type de conicité Poids net
(kg)
Grande quantité commandée

18.92 €

1 3 jours 40ROTEX 19 ST19AcierAvec rainure22H719000-0,5 / +1,20.21.22516-0.1750

Loading...

  1. 1

Vous vous trouvez sur la page de Moyeu ROTEX®, le numéro d'article est le suivant: 020195102200.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article 020195102200.

Variantes de ce produit

Référence pièce
020142101100
020142101200
020142101400
020195102400
020195102500
020195110040
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
Diam. extérieur A
(mm)
Type de produit Taille Matériau Version Diamètre
(mm)
Adaptation Vitesse max.
(tr/min)
déplacement axial admissible
(mm)
désalignement radial admissible
(mm)
déplacement angulaire admissible
(°)
l1, l2
(mm)
E
(mm)
Type de conicité Poids net
(kg)
Grande quantité commandée

10.40 €

1 3 jours 30ROTEX 14 SINT14Acier frittéAvec rainure11H7--0,5 / +1,00.171.21113-0.0550

10.40 €

1 3 jours 30ROTEX 14 SINT14Acier frittéAvec rainure12H7--0,5 / +1,00.171.21113-0.0550

10.40 €

1 3 jours 30ROTEX 14 SINT14Acier frittéAvec rainure14H7--0,5 / +1,00.171.21113-0.04950

18.92 €

1 3 jours 40ROTEX 19 ST19AcierAvec rainure24H719000-0,5 / +1,20.21.22516-0.1550

18.92 €

1 3 jours 40ROTEX 19 ST19AcierAvec rainure25H719000-0,5 / +1,20.21.22516-0.1450

9.71 €

1 3 jours 40ROTEX 19 ST19AcierNon alésé--19000-0,5 / +1,20.21.23716-0.3950

Assistance technique