Référence fabricant: 020245121570
Marque: KTR_SYSTEMS
Prix: 25.27 €
Délai de livraison: 3 jours
Diam. extérieur A: 55 mm
Type de produit: ROTEX 24 ST
Taille: 24
Matériau: Acier
Version: ANSI/AGMA 9002-C14
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
020245121570
Type 1.0 hub with feather keyway and setscrew Positive locking power transmission, permissible torque depending on the permissible surface pressure. Not suitable for backlash-free power transmission with heavily reversing operation. Type 1.1 hub without feather keyway with setscrew Non-positive torque transmission for crimp and glued connections. (No ATEX-release) Type 1.3 hub with spline bore (see page 20) | Type 2.0 clamping hub single slotted without feather keyway Frictionally engaged, backlash-free shaft-hub-connection-. Transmittable torques depending on bore diameter (see page 34). (For ATEX category 3 only) Type 2.1 clamping hub single slotted with feather keyway Non-positive torque transmission for crimp and glued connections. (No ATEX-release) Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced. Type 2.3 clamping hub with spline (see page 29/30) | |||
Type 4.2 hub with CLAMPEX® clamping set KTR 250 Frictionally engaged, backlash-free shaft-hub-connection for the transmission of average torques. Type 4.1 for CLAMPEX® clamping set KTR 200 type 4.3 for CLAMPEX® clamping set KTR 400 Frictionally engaged, backlash-free shaft-hub-connection for the transmission of high torques. | Type 6.0 clamping ring hub (see ROTEX® GS series) Integrated frictionally engaged shaft-hub-connection for the transmission of higher torques. Screwing on elastomer side. For details about torque and dimensions see page 29. Suitable for high speeds. Type 6.5 clamping ring hub (see ROTEX® GS series) Design like 6.0, except for clamping screws externally. As an example for radial disassembly of intermediate pipe (special design). | |||
Type 7.5 clamping hub type DH without feather keyway for double-cardanic connection Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only) Type 7.6 clamping hub type DH with feather keyway for double-cardanic connection Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced. | Type 7.8 clamping hub type H without feather keyway Frictionally engaged, backlash-free shaft-hub-connection for radial assembly of coupling. Transmittable torques depending on bore diameter (For ATEX category 3 only) Type 7.9 clamping hub type H with feather keyway Positive locking power transmission with additional friction fit for radial assembly of coupling. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced. | |||
Type 7.0 SPLIT hub without feather keyway Split hub made of cast iron. Frictionally engaged, backlashfree shaft-hub-connection-. Transmittable torques depending on bore diameter (For ATEX category 3 only) | Type 7.1 SPLIT hub with feather keyway Split hub made of cast iron. Positive locking power transmission with additional frictionally engaged condition. The frictional engagement avoids or reduces the reverse backlash. Surface pressure of the keyway connection is reduced. | |||
FNN hub Coupling hub to be connected to an attachment such as brake drum, brake disk and fan. | SD hub shifting hub Coupling hub for separating or switching on the driving/ driven machine with standstill of the machine. Can be combined with slip ring and shiftable linkage. | |||
TB1 hub/TB2 hub Coupling hub for taper clamping bushes. TB1 screwed on cam side. TB2 screwed externally. | Type 3Na + 4N Driving flange with flange type K For type AFN and BFN: With type AFN the spider can be replaced while being assembled without having to disassemble the driving and driven side. | |||
Mitnehmerflansch Ausf. 3b Driving flange to connect to customer’s component. Abmessungen siehe Seite 38 | Mitnehmerflansch Ausf. 3Na Driving flange to connect to customer’s component. Abmessungen siehe Seite 38 |
Référence pièce
|
---|
020245121570 |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Diam. extérieur A (mm) | Type de produit | Taille | Matériau | Version | Diamètre (mm) | Adaptation | Vitesse max. (tr/min) | déplacement axial admissible (mm) | désalignement radial admissible (mm) | déplacement angulaire admissible (°) | l1, l2 (mm) | E (mm) | Type de conicité | Poids net (kg) | Grande quantité commandée | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
25.27 € | 1 | 3 jours | 55 | ROTEX 24 ST | 24 | Acier | ANSI/AGMA 9002-C14 | 15.875 | - | 13800 | -0,5 / +1,4 | 0.22 | 0.9 | 30 | 18 | - | 0.54 | 50 |
Loading...
Vous vous trouvez sur la page de Moyeu ROTEX®, le numéro d'article est le suivant: 020245121570.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article 020245121570.
Configurer
Propriétés de base
Adaptation
Type de conicité
Type
Diam. extérieur A(mm)
Type de produit
Taille
Matériau
Version
Diamètre(mm)
Vitesse max.(tr/min)
déplacement axial admissible(mm)
désalignement radial admissible(mm)
déplacement angulaire admissible(°)
l1, l2(mm)
E(mm)
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
Propriétés optionnelles
Référence pièce |
---|
020142101100 |
020142101200 |
020142101400 |
020245121930 |
020245122280 |
020245122290 |
Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Diam. extérieur A (mm) | Type de produit | Taille | Matériau | Version | Diamètre (mm) | Adaptation | Vitesse max. (tr/min) | déplacement axial admissible (mm) | désalignement radial admissible (mm) | déplacement angulaire admissible (°) | l1, l2 (mm) | E (mm) | Type de conicité | Poids net (kg) | Grande quantité commandée |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
10.40 € | 1 | 3 jours | 30 | ROTEX 14 SINT | 14 | Acier fritté | Avec rainure | 11 | H7 | - | -0,5 / +1,0 | 0.17 | 1.2 | 11 | 13 | - | 0.05 | 50 | ||
10.40 € | 1 | 3 jours | 30 | ROTEX 14 SINT | 14 | Acier fritté | Avec rainure | 12 | H7 | - | -0,5 / +1,0 | 0.17 | 1.2 | 11 | 13 | - | 0.05 | 50 | ||
10.40 € | 1 | 3 jours | 30 | ROTEX 14 SINT | 14 | Acier fritté | Avec rainure | 14 | H7 | - | -0,5 / +1,0 | 0.17 | 1.2 | 11 | 13 | - | 0.049 | 50 | ||
25.27 € | 1 | 3 jours | 55 | ROTEX 24 ST | 24 | Acier | ANSI/AGMA 9002-C14 | 19.05 | - | 13800 | -0,5 / +1,4 | 0.22 | 0.9 | 30 | 18 | - | 0.53 | 50 | ||
25.27 € | 1 | 3 jours | 55 | ROTEX 24 ST | 24 | Acier | ANSI/AGMA 9002-C14 | 22.225 | - | 13800 | -0,5 / +1,4 | 0.22 | 0.9 | 30 | 18 | - | 0.5 | 50 | ||
25.27 € | 1 | 3 jours | 55 | ROTEX 24 ST | 24 | Acier | ANSI/AGMA 9002-C14 | 22.225 | - | 13800 | -0,5 / +1,4 | 0.22 | 0.9 | 30 | 18 | - | 0.5 | 50 |