Connecteur câble à circuit imprimé série MDF51 pour circuit imprimé à résistance à haute tension (3000V), avec verrou inclus
- Remise sur volume
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
MDF51K-2P-12DSA(20)
Informations de base
| Connector Shape | Rectangulaire | Connector series initials | M/N/O | M·N·O | MDF |
|---|---|---|---|---|---|
| Applicable pin/contact | Mâle | Number Of Cores | 2 | Type de connecteur | Pour PCB |
| Courant nominal(A) | 1 | Allowable Voltage(V) | CA / CC 3000 | Méthode de câblage | Montage sur circuit imprimé (DIP) |
| Connection direction | Droit | Representative Standard | UL / CUL / TUV | Placage de la borne en contact avec la pièce | Étain |
| Catégorie du produit | Embase | Dimensions (verticale × horizontale × profondeur)(mm) | 9.55 x 21.5 x 11.9 | Pas du contact(mm) | 12 |
| Plage de températures de fonctionnement(°C) | -35 à +85 | Pas de la borne(mm) | 12 |
Configurer
Propriétés de base
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.