Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
Référence fabricant: P-5-14
Marque: KAWASHIMO
Prix: 220.91 €
Délai de livraison: 13 jours
Details Type: P Type (for Power Chuck)
Compatible Chuck Outer Diameter (in.): 5
Pin Diameter: 13.5 mm
Outer Diameter: 145 mm
Maximum Machining Dimensions: 65 mm
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
P-5-14
Référence pièce
|
---|
P-5-14 |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Details Type | Compatible Chuck Outer Diameter (in.) | Pin Diameter (mm) | Outer Diameter (mm) | Maximum Machining Dimensions (mm) | Trusco Code | Mass (g) | |
---|---|---|---|---|---|---|---|---|---|---|---|
220.91 € | 1 | 13 jours | P Type (for Power Chuck) | 5 | 13.5 | 145 | 65 | 103-1848 | 1100 |
Loading...
Features | Soft jaw forming setup is done within 1 minute. Processing also completes in a short time. Even inexperienced people can do centering with single-action. Core runout accuracy is within 10 microns. Caliper measurements can be made without installing permanent tooling. When using, open the chuck, insert 3 stop pins of chuck mate in the mounting hole of soft jaw, and then tighten the chuck. In the case of tension chuck, perform the reverse operation. | Application | For soft jaw molding holder with chucked workpieces. |
---|
Configurer
Propriétés de base
Type
Details Type
Compatible Chuck Outer Diameter (in.)
Pin Diameter(mm)
Outer Diameter(mm)
Maximum Machining Dimensions(mm)
Trusco Code
Filtrer par jours d'expédition standard
Propriétés optionnelles