Mâchoire souple HO1MA (pour HOWA)【2-3 pièces par conditionnement】 (HO1MA-12-3.0)
Détails du produit:
Référence fabricant: HO1MA-12-3.0
Marque: TRUSCO NAKAYAMA
Prix: 169.47 €
Délai de livraison: 6 jours
Données techniques:
Details Type: For HO1MA
Chuck diameter: 12 Inch
Pitch: 3 mm
Height: 50 mm
Length: 129 mm
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
HO1MA-12-3.0
Référence pièce
|
|---|
| HO1MA-12-3.0 |
| Référence pièce |
Prix unitaire standard
| Nombre de pièce(s) incluse(s) dans le conditionnement | Quantité minimale de commande | Remise sur volume | Details Type | Chuck diameter (Inch) | Pitch (mm) | Height (mm) | Length (mm) | Width (mm) | Trusco Code | Mass (g/group) | Features | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
169.47 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 12 | 3 | 50 | 129 | 50 | 114-0663 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. |
Loading...
Vous vous trouvez sur la page de Mâchoire souple HO1MA (pour HOWA), le numéro d'article est le suivant: HO1MA-12-3.0.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article HO1MA-12-3.0.
Configurer
Propriétés de base
-
Type
- HO1MA-1.5
- HO1MA-3.0
- HO22M
- HO24M
- HO27M
- HO7MA
- HO7MA-60
- HO7MA-90
-
Details Type
- For HO1MA
-
Chuck diameter(Inch)
-
Pitch(mm)
- 1.5
- 3
-
Height(mm)
-
Length(mm)
-
Width(mm)
-
Trusco Code
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
- 10 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| HO1MA-10-1.5 |
| HO1MA-10-3.0 |
| HO1MA-12-1.5 |
| HO1MA-15-3.0 |
| HO1MA-4-1.5 |
| HO1MA-5-1.5 |
| Référence pièce | Prix unitaire standard | Nombre de pièce(s) incluse(s) dans le conditionnement | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Details Type | Chuck diameter (Inch) | Pitch (mm) | Height (mm) | Length (mm) | Width (mm) | Trusco Code | Mass (g/group) | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
107.92 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 10 | 1.5 | 40 | 110 | 40 | 114-0639 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
107.92 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 10 | 3 | 40 | 110 | 40 | 114-0647 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
169.47 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 12 | 1.5 | 50 | 129 | 50 | 114-0655 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
303.76 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 15 | 3 | 70 | 156 | 64 | 114-0671 | 13600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
54.72 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 4 | 1.5 | 25 | 54 | 23 | 114-0574 | 600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
55.15 € | 3 pièces par conditionnement | 1 paquet | 6 jours | For HO1MA | 5 | 1.5 | 25 | 58.5 | 23 | 114-0582 | 650 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.