GP Sander Sisal (type à vissage direct)【5 pièces par conditionnement】
[Features]
· Using in combination with sisal (hemp) and cotton fabric gives great sharpness and a beautiful polish.
· Used for intermediate polishing and base polishing of stainless steel, aluminum, etc. with oil and fat abrasive.
· Ideal for paper polishing before mirror finishing.
· Also available for flexible sanders if a 6 mm shaft adapter is used.
· Using the side to straighten the polishing grain makes the next process easier.
· Mounted by screwing directly onto the shaft of a disc grinder.
[Applications]
· Steel, stainless steel, aluminum, and other medium polishing and sub polishing.
· Using in combination with sisal (hemp) and cotton fabric gives great sharpness and a beautiful polish.
· Used for intermediate polishing and base polishing of stainless steel, aluminum, etc. with oil and fat abrasive.
· Ideal for paper polishing before mirror finishing.
· Also available for flexible sanders if a 6 mm shaft adapter is used.
· Using the side to straighten the polishing grain makes the next process easier.
· Mounted by screwing directly onto the shaft of a disc grinder.
[Applications]
· Steel, stainless steel, aluminum, and other medium polishing and sub polishing.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TGPSS10025
Informations de base
| Outer Diameter(mm) | 100 | Thickness(mm) | 25 | Thread Diameter(mm) | M10(P1.5) |
|---|---|---|---|---|---|
| Max. Rotational Speed(rpm) | 8000 | Particle Size(#) | - | Pcs./Box.(piece) | 5 |
| Trusco Code | 328-7416 | Features | Using in combination with sisal (hemp) and cotton fabric gives great sharpness and a beautiful polish. Used for steel grinding, stainless steel, aluminum, other intermediate grinding and base grinding using an oily abrasive. Ideal as a paper for filling holes prior to mirror finishing. Also available for flexible sanders if a 6 mm shaft adapter is used. | Application | Steel, stainless steel, aluminum, and other medium polishing and sub polishing. |
| Maximum operating rotation speed | 41.9m/s(2512m/min) | Accessory | With 6 mm Shaft Adapter (1 per box) | Mass(g/box) | 130 |
Vous vous trouvez sur la page de GP Sander Sisal (type à vissage direct), le numéro d'article est le suivant: TGPSS10025.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TGPSS10025.
Configurer
Propriétés de base
-
Type
- TGPSS10025
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.