« Clé double coulisse pour rack 2 » (6 dimensions acceptées) (Numéros de référence)
- Remise sur volume
[Features]
· With a replacement socket, 1 piece supports 6 sizes.
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· A combination of 13 and 17 mm frequently used sockets.
· A slide long socket.
· The 17 mm tool is dual-face machined to enter raceways.
· Suitable for work with facilities using water.
· With safety rope mounting holes.
[Applications]
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· Suitable for work with facilities using water.
· With a replacement socket, 1 piece supports 6 sizes.
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· A combination of 13 and 17 mm frequently used sockets.
· A slide long socket.
· The 17 mm tool is dual-face machined to enter raceways.
· Suitable for work with facilities using water.
· With safety rope mounting holes.
[Applications]
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· Suitable for work with facilities using water.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TRW-WS2
Informations de base
| Type | Clé multifonction | Ratchet mechanism | Disponible | Swivel (flex) | N/A |
|---|---|---|---|---|---|
| Overall Length(mm) | 169 | Width across flat dimension(mm) | 13×17 / 8×10×12×14 | Single Product/Set Classification | Produit du jeu |
| Set Content(Point) | 2 | Set Content | 8×10×12×14、13×17 | Trusco Code | 344-8860 |
| Mass(g) | 290 | Features | Comes with replacement socket, with one piece supporting 6 sizes. It is applicable to the support fitting for inner wires and mounting of various types of racks during electric construction work. It is a combination of 13/17 mm sockets that are frequently used. It is a long sliding socket. 2-surface machining at 17 mm with a raceway. It is suitable for work on plumbing equipment. It is a mounting hole for safety rope. | Material: Main body | Stainless steel (SUS 420J2) |
Vous vous trouvez sur la page de « Clé double coulisse pour rack 2 » (6 dimensions acceptées), le numéro d'article est le suivant: TRW-WS2.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TRW-WS2.
Configurer
Propriétés de base
-
Type
- TRW-WS2
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.