Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
---|
WEL-FCW-309LT-0.9-12.5 |
WEL-FCW-309LT-1.2-12.5 |
WEL-FCW-309LT-1.6-12.5 |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Wire Diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Arc Voltage Down Facing (V) | Arc Voltage Vertical Up Facing (V) | |
---|---|---|---|---|---|---|---|---|---|
560.48 € | 1 | 8 jours | 0.9 | 120~130 | 60~80 | 26~29/24~27 | 21~24/20~23 | ||
390.48 € | 1 | 8 jours | 1.2 | 180–200 | 110~140 | 30~32/28~30 | 22~24/21~23 | ||
358.73 € | 1 | 8 jours | 1.6 | 220–240 | - | 30~32/28~30 | - |
Loading...
Product Type | Fil de soudage | Amount Of Content | 1 Box (12.5 kg) | Features | As WEL FCW 309T, WEL FCW 309LT is suitable for welding of 13Cr, 18Cr steel and SUS309S. With carbon content as low as 0.04% or less, is ideal for underlaying low carbon stainless-clad steel and lining weld. Low crack sensitivity is effective for welding at easy-to-crack points. |
---|---|---|---|---|---|
Application | Differing Material Fitting, for Overlay Welding | Shield Gas Flow Rate(l/min) | 20 | Extension(mm) | 15~25 |
(JIS) Equivalent standard | TS309L-FB0 | (AWS) Equivalent standard | E309LT0-1/4 | Chemical components C(%) | 0.022 |
Chemical components Si(%) | 0.72 | Chemical components Cu(%) | 0.08 | Chemical components Mn(%) | 1.27 |
Chemical components P(%) | 0.023 | Chemical components S(%) | 0.006 | Chemical components Ni(%) | 13.02 |
Chemical components Cr(%) | 24.10 | Chemical components Mo(%) | 0.04 | Mechanical property (tensile strength)(Mpa) | 541 |
Mechanical property (elongation)(%) | 37.2 | Mechanical property (0.2% yield stress)(Mpa) | 434 | Shield Gas | 100%CO2/80%Ar+20%CO2 |
Mass(g) | 12500 |
Configurer
Propriétés de base
Wire Diameter(mm)
Current range, lower(A)
Current range, vertical position, elevating, upper
Arc Voltage Down Facing(V)
Arc Voltage Vertical Up Facing(V)
Type
Filtrer par jours d'expédition standard
Propriétés optionnelles