MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel SE-A50 (SE-A50-0.9-20)
Détails du produit:
Référence fabricant: SE-A50-0.9-20
Marque: KOBE STEEL
Prix: 179.15 €
Délai de livraison: 8 jours
Données techniques:
Wire Diameter: 0.9 mm
Current range, lower: 50～220 A
Current range, vertical position, elevating, upper: 50～150/50～150
Chemical Composition of Deposited Metal C: 0.06 %
Chemical Composition of Deposited Metal Si: 0.62 %
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
SE-A50-0.9-20
Référence pièce
|
|---|
| SE-A50-0.9-20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Wire Diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Chemical Composition of Deposited Metal C (%) | Chemical Composition of Deposited Metal Si (%) | Chemical Composition of Deposited Metal Mn (%) | Chemical Composition of Deposited Metal P (%) | Chemical Composition of Deposited Metal S (%) | Mechanical Properties of Weld Metal Proof Stress MPa | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | Mechanical Properties of Weld Metal Proof Stress, Elongation (%) | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy (J) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
179.15 € | 1 | 8 jours | 0.9 | 50～220 | 50～150/50～150 | 0.06 | 0.62 | 1.27 | 0.010 | 0.015 | 460 | 559 | 28 | 120 |
Loading...
Informations de base
| Product Type | Fil de soudage | JIS Standard | Z3313 YGW16 | AWS Standard | A5.18 ER70S-G Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For Mixed Gas and Low Current Use | Amount Of Content | 1 Box (20 kg) | Mass(g) | 20000 |
| Application and Usage Characteristic | Butt-jointing, fillet welding, and lap welding of automobiles, railcars, appliances, general machinery, etc. This is SE wire (without copper plating). It has excellent arc stability in the low to mid current region, and it's suitable for thin to medium plate welding for all welding positions. A beautiful bead is achieved with little spatter, fumes, or slag, and it's also suitable for pulse welding. There are no problems with copper plating scraps, and tip fusion is reduced, so the work capacity when using robots can be improved. | Main Points of Work | We recommend replacing the liner, etc., after using plated wire over long periods. | Authorized by the Classification Society of Japan | NK |
Configurer
Propriétés de base
-
Type
- SE-A50
-
Wire Diameter(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.