Coated Rod for Soft Steel to 550 MPa Grade Steel B-33【1-4 pièces par conditionnement】 (B-33-2-20)
Détails du produit:
Référence fabricant: B-33-2-20
Marque: KOBE STEEL
Prix: 358.02 €
Délai de livraison: 8 jours
Données techniques:
Pole diameter: 2 mm
Pole length: 300 mm
Current range, lower: 30–60 A
Current range, vertical position, elevating, upper: 30–60
Amount Of Content: 1 Box (2 kg x 10 Cases)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
B-33-2-20
Référence pièce
|
|---|
| B-33-2-20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Amount Of Content | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|
358.02 € | 1 | 8 jours | 2 | 300 | 30–60 | 30–60 | 1 Box (2 kg x 10 Cases) | 20000 |
Loading...
Informations de base
| Product Type | Baguette de soudage | JIS Standard | Z3311 E4313 | AWS Standard | A5.1 E6013 Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For thin plate and lightweight structures | Application and Usage Characteristic | General machinery, lightweight thin steel plates, light structure welding and cosmetic welding. It has especially good workability for downward and horizontal fillet welding. There is very little sputtering and the slag sheathing and peeling is good. A beautiful, glossy bead with shallow welding-in can be obtained. Applicable for welding focused on exterior appearance. The large diameter rod is optimal for cosmetic welding. | Main Points of Work | Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature. |
| Chemical Composition of Deposited Metal C(%) | 0.08 | Chemical Composition of Deposited Metal Si(%) | 0.30 | Chemical Composition of Deposited Metal Mn(%) | 0.33 |
| Chemical Composition of Deposited Metal P(%) | 0.013 | Chemical Composition of Deposited Metal S(%) | 0.009 | Identification Color, Rod End Color | Pink |
| Identification Color, Secondary Color | NA | Mechanical Properties of Weld Metal Proof Stress MPa | 430 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 480 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 24 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | - |
Configurer
Propriétés de base
-
Type
- B-33
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Amount Of Content
-
Mass(g)
- 5000
- 20000
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.