Coated Rod for Soft Steel to 550 MPa Grade Steel B-10【1-4 pièces par conditionnement】
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| B-10-2.6-5 |
| B-10-2.6-20 |
| B-10-3.2-5 |
| B-10-3.2-20 |
| B-10-4-5 |
| B-10-4-20 |
| Référence pièce |
Prix unitaire standard
| Nombre de pièce(s) incluse(s) dans le conditionnement | Quantité minimale de commande | Remise sur volume | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Amount Of Content | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
66.04 € | 1 | 4 jours | 2.6 | 350 | 50~85 | 40–70 | 1 Case (5 kg) | 5000 | |||
179.00 € | 4 pièces par conditionnement | 1 paquet | 7 jours | 2.6 | 350 | 50~85 | 40–70 | 1 Box (5 kg x 4 Cases) | 20000 | ||
61.47 € | 1 | 5 jours | 3.2 | 350 | 80～130 | 60~110 | 1 Case (5 kg) | 5000 | |||
164.09 € | 4 pièces par conditionnement | 1 paquet | 7 jours | 3.2 | 350 | 80～130 | 60~110 | 1 Box (5 kg x 4 Cases) | 20000 | ||
59.23 € | 1 | 5 jours | 4 | 400 | 120～180 | 100~150 | 1 Case (5 kg) | 5000 | |||
158.04 € | 4 pièces par conditionnement | 1 paquet | 7 jours | 4 | 400 | 120～180 | 100~150 | 1 Box (5 kg x 4 Cases) | 20000 |
Loading...
Informations de base
| Product Type | Baguette de soudage | JIS Standard | Z3211 E4319 | AWS Standard | A5.1 E6019 Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For general structures | Application and Usage Characteristic | For welding general structures such as vehicles and buildings. It's suitable for butt-jointing and fillet welding of thin plate up to about 20 mm. The slag covering in the downward direction is stable, so a glossy, beautiful bead is obtained. The weld penetration is higher than with high-titanium oxide types and lime titania types, so it is suitable for welded joints that need sufficient weld penetration, even thin plate. | Main Points of Work | Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature. |
| Chemical Composition of Deposited Metal C(%) | 0.10 | Chemical Composition of Deposited Metal Si(%) | 0.09 | Chemical Composition of Deposited Metal Mn(%) | 0.39 |
| Chemical Composition of Deposited Metal P(%) | 0.016 | Chemical Composition of Deposited Metal S(%) | 0.008 | Identification Color, Rod End Color | Green |
| Identification Color, Secondary Color | NA | Mechanical Properties of Weld Metal Proof Stress MPa | 400 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 450 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 26 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 95 |
Configurer
Propriétés de base
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Amount Of Content
-
Mass(g)
- 5000
- 20000
-
Type
- B-10
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 5 jours ou moins
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.