Coated Rod for Soft Steel to 550 MPa Grade Steel Z-43F (Numéros de référence)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Z-43F-4-20
Informations de base
| Product Type | Baguette de soudage | Pole diameter(mm) | 4 | Pole length(mm) | 450/550 |
|---|---|---|---|---|---|
| JIS Standard | Z3211 E4340 | Compatible Material Type | For low fume, fillet welding | Amount Of Content | 1 Box (20 kg) |
| Mass(g) | 20000 | Application and Usage Characteristic | Horizontal and downward fillet welding for shipbuilding, bridge building, buildings, and general structures. The fume quantity is reduced by about 30% when compared to similar rods. Exhibits excellent performance in both manual welding and gravity welding. Excellent pit resistance and re-arc properties; slag peels off almost by itself, and the bead surface is glossy and beautiful. | Main Points of Work | Suitable currents will differ based on welding methods, the state of steel plates, etc. Pay attention to the state of slag and adjust it. The electrode manipulation ratio can be between 0.8 and 1.6. However, 1.2 to 1.5 is considered best for gravity welding. Excessive moisture absorption may lead to undercutting, the unevenness of beads, etc. Please dry at temperatures between 70°C and 100°C for 30 to 60 minutes. Excessive drying (such as that caused by long periods of time or high temperatures) may lead to incomplete penetration and burnt bars, even if no changes in quality are apparent. |
| Chemical Composition of Deposited Metal C(%) | 0.07 | Chemical Composition of Deposited Metal Si(%) | 0.48 | Chemical Composition of Deposited Metal Mn(%) | 0.72 |
| Chemical Composition of Deposited Metal P(%) | 0.02 | Chemical Composition of Deposited Metal S(%) | 0.009 | Identification Color, Rod End Color | Silver-gray color |
| Identification Color, Secondary Color | Green Food | Mechanical Properties of Weld Metal Proof Stress MPa | 480 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 540 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 26 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 74 | Horizontal downward fillet | 140~190 |
| Authorized by the Classification Society of Japan | NK,ABS,LR |
Configurer
Propriétés de base
-
Type
- Z-43F
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.