Clé dynamométrique paramétrable
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
[Features]
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Informations de base
| Product Type | Moule prédéfini | Torque adjustment range(N·m) | 150～800 | Minimum graduation(N·m) | 5 |
|---|---|---|---|---|---|
| Overall Length(mm) | 1050 | Torque Precision(±%) | 4 | Main body: option | Main Body |
| Mass(g) | 5800 | Features | The torque value to be measured can be pre-set in advance, and this is especially effective for use when work is continuous, and when gradations are difficult to read. A locking function after the measuring value has been set is included. Measuring action not only on the right torque but also on the left torque is enabled. As the head width is narrow, this can also be used to measure areas where no other devices in the past could measure. A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and keeping high accuracy. | Application | For general tightening tasks. |
| Load direction | Left/ right |
Configurer
Propriétés de base
-
Insertion Angle(mm)
-
Trusco Code
-
Type
- CMPB
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.