MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z210
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
MX-Z210-1.2-20
Informations de base
| Product Type | Fil de soudage | Wire Diameter(mm) | 1.2 | Current range, lower(A) | 150～350 |
|---|---|---|---|---|---|
| JIS Standard | Z3313 T 49J 0 T1-0 C A-U (Previously YFW-C50DM) | AWS Standard | A5.20 E70T-1C Applicable | Compatible Material Type | For fillet and butt-jointing |
| Amount Of Content | 1 Box (20 kg) | Mass(g) | 20000 | Application and Usage Characteristic | Fillet and butt-jointing in can manufacturing, lightweight steel frames, industrial machinery, construction machinery, etc. This wire allows fillet welding and downward/lateral butt-jointing. The product has excellent anti-porosity capabilities, low sputter, low fumes, high welding speed and is very user-friendly. |
| Main Points of Work | Favorable pore resistance may be prevented depending on primer type and membrane thickness. Each model and membrane thickness must be confirmed. In general, inorganic zinc is recommended. The use of the Super Animo and other devices makes fillet welding even more efficient. | Chemical Composition of Deposited Metal C(%) | 0.05 | Chemical Composition of Deposited Metal Si(%) | 0.6 |
| Chemical Composition of Deposited Metal Mn(%) | 1.30 | Chemical Composition of Deposited Metal P(%) | 0.013 | Chemical Composition of Deposited Metal S(%) | 0.012 |
| Mechanical Properties of Weld Metal Proof Stress MPa | 480 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 570 | Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 25 |
| Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 80 | Lateral | 150~300 | Lateral horizontal fillet | 150~300 |
| Up-Facing Fillet | 150~210 | Vertical Downward Fillet Weld | 150~300 | Authorized by the Classification Society of Japan | NK,ABS,LR,GL |
Configurer
Propriétés de base
-
Type
- MX-Z210
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.