Coated Rod for Soft Steel to 550 MPa Grade Steel Z-44【1-10 pièces par conditionnement】 (Z-44-5-20)
Détails du produit:
Référence fabricant: Z-44-5-20
Marque: KOBE STEEL
Prix: 157.36 €
Délai de livraison: 8 jours
Données techniques:
Pole diameter: 5 mm
Pole length: 450 mm
Current range, lower: 190～250 A
Current range, vertical position, elevating, upper: 140～210
Amount Of Content: 1 Box (5 kg x 4 Cases)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Z-44-5-20
Référence pièce
|
|---|
| Z-44-5-20 |
| Référence pièce |
Prix unitaire standard
| Nombre de pièce(s) incluse(s) dans le conditionnement | Quantité minimale de commande | Remise sur volume | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Amount Of Content | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
157.36 € | 4 pièces par conditionnement | 1 paquet | 8 jours | 5 | 450 | 190～250 | 140～210 | 1 Box (5 kg x 4 Cases) | 20000 |
Loading...
Informations de base
| Product Type | Baguette de soudage | JIS Standard | Z2311 E4303 | Compatible Material Type | For thin to medium plates, one of the representative brands |
|---|---|---|---|---|---|
| Application and Usage Characteristic | Welding of general structures, such as vehicles, light gauge steel, and buildings. It reduces the amount of fumes by 30% compared to similar rods. With excellent re-arcing and slag removability, it is ideal for intermittent welding, fillet welding, and tack welding. It can be bent by hand for use, and with a rod diameter of 3.2 mm or less, vertical downward welding is also possible. Because it tends not to absorb moisture, under ordinary storage conditions, drying can be omitted. | Main Points of Work | Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature. | Chemical Composition of Deposited Metal C(%) | 0.08 |
| Chemical Composition of Deposited Metal Si(%) | 0.14 | Chemical Composition of Deposited Metal Mn(%) | 0.34 | Chemical Composition of Deposited Metal P(%) | 0.014 |
| Chemical Composition of Deposited Metal S(%) | 0.009 | Identification Color, Rod End Color | Silver-gray color | Identification Color, Secondary Color | Blue White |
| Mechanical Properties of Weld Metal Proof Stress MPa | 410 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 460 | Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 28 |
| Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 95 | Authorized by the Classification Society of Japan | NK,ABS,LR,DNV |
Configurer
Propriétés de base
-
Type
- Z-44
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Amount Of Content
-
Mass(g)
- 2000
- 5000
- 20000
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.