Jeu de clés hexagonales, tête demi-sphérique (demi-longues)
- Remise sur volume
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
THBR-9S
Informations de base
| Type | Clé hexagonale | Tip Type | Bille | Single Product/Set Classification | Produit du jeu |
|---|---|---|---|---|---|
| Set Content(mm) | 1.5、2、2.5、3、4、5、6、8、10 | Set Content(piece) | 10 | Mass(g/Set) | 474 |
| JAN Code | 4989999391558 | Trusco Code | 768-4207 | Accessory | ● Holder ● Pipe handle |
| Material | Special Alloy Chrome Vanadium Steel | Ordering Unit | 1S |
Vous vous trouvez sur la page de Jeu de clés hexagonales, tête demi-sphérique (demi-longues), le numéro d'article est le suivant: THBR-9S.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article THBR-9S.
Configurer
Propriétés de base
-
Ordering Unit
-
Type
- THBR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.