Colonnes lumineuses（Color (fourth stage)：Blanc）

?* À propos du délai d'expédition et des prix

• 

  Lampe de signal stratifiée à LED avec alarme sonore électronique

  PATLITE

  A speech synthesis type / electronic audio alarm device with a built-in high-volume horn. Features LED stack lights that are clearly visible from a distance. Features 32 built-in alarm sounds and melodies (the LKEH-FV type has no built-in audio functionality).
  
  [Features]
  The head cover uses an alloy resin with excellent oil resistance (oil mist environments also taken into consideration).
  · The body is made using AES resin giving excellent weather resistance.
  · The lighting unit is made using polycarbonate resin, which helps protect against impact/shock.
  · The surface of the lighting unit is flat, helping prevent dust from accumulating.
  · The new reflective mirror design improves visibility from both the top and bottom.
  · The optimized horn-shaped design deliver a volume of 105dB (at 1 m).
  · The volume, selection switches, and SD card slot are found on the front of the unit, enabling easy changing of settings, even post-installation.
  · Operate the selection switch to play the test sounds which can then be used to check operations and for when adjusting the volume.
  · Also complies with CE standards (24V specifications) for use internationally.
  · The volume can be reduced by approximately 20dB via the noise-reduction input. The combination of a timer and sensor allow noise reduction for use during nighttime.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · UL-compatible types are also available.
  · Boasts IP53 protective characteristics, enabling use in factories with high volumes of moisture and dust.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	842.09 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Colonnes lumineuses murales à LED de type mince

  PATLITE

  The newly-developed LED illumination type structure improves visibility from the sides. A thin type designed for full integration with equipment.
  
  [Features]
  [A thin type with a depth of just 37.5 mm that fits neatly on equipment.
  · In the pursuit of ever-thinner devices, the depth has been kept down to just 37.5 mm, helping greatly improve integration with equipment.
  · LEDs are used for the light source, rendering maintenance such as post-installation replacing of light bulbs unnecessary, while also reducing running costs.
  [The newly-developed LED illumination type structure provides high visibility from the sides]
  · In terms of setting the direction in which the LEDs illuminate, the manufacturer has developed a structure (patent pending) which can guarantee luminance from the sides, improving visibility from the side.
  [A dust-proof and jet-proof IP65 structure that can be used under harsh conditions.]
  · The IP65 (FB type is IP54) dust-proof and jet-proof structure enables use even in factories with large amounts of moisture and dust.
  [A cost effective five-color high luminance LED with low power consumption.]
  Uses ultra-high luminance LEDs for reduced power consumption compared to light bulbs, helping improve energy saving efforts. The lineup includes three to five stack types.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	220.79 €
  Délai d'expédition minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Voyant lumineux superposé à LED super fin

  PATLITE

  An ultra-slim types with an aluminum body. Ideal for small equipment, etc.
  
  [Features]
  · The modular structure makes changing and expanding of the color array easy.
  · The wiring is determined by the color of the unit. As such, there is no need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined and expanded, even after mounting to equipment.
  · The prism cut globes scatter the light with a high level of brightness, helping improve visibility.
  · The body is made from aluminum, helping protect against rust. Maintain its appearance, even after many hours of use.
  · The screws for mounting the main body are parallel screw size types for pipes/tubes, enabling direct connection with flexible wire conduits, etc.
  · A modular structure in which the wiring is determined by the color of the unit.
  · No need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined, even after mounting to equipment.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · CE marking compliant (conforms to EN / IEC standards).
  · UL standards compliant (UL508 / File no. E215660).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.09 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

Loading...