?* À propos du délai d'expédition

• • Recommandation

  

  Connecteur DIN (type 4 rangées, 128 contacts) - XC5 (multi-contact)

  OMRON

  [Features]
  ・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
  ・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
  ・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
  ・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.

  • Remise sur volume

  à partir de∗ ：	14.71 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • Recommandation

  

  Connecteur DIN (pour courants électriques moyens et élevés) - XC4

  OMRON

  [Features]
  ・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
  ・ It conforms to and is compatible with DIN41612.
  ・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
  ・ It can be mounted within the same rack as the XC5 series.
  ・ There is a wide selection of the M type of DIN connectors (mixed type) available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for some products).

  • Remise sur volume

  à partir de∗ ：	10.94 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés, demi-pas, série DHB

  FUJIKURA (DDK)

  There are two contact tail lengths (long and short) for each row to better facilitate insertion into PCB through holes.
  
  [Features]
  ・In addition to lock pins for fixing to the PCB, some of the contacts (4 on each side) have kink processing for temporary holding of the connector.
  ・A number of products are available to fit different applications (with a base 15.1 mm spacing between boards), including slotted types with zero breakages (even if the connector is removed at an angle), 1.4 mm sequencer types for different contact timing, low-profile types with 10 mm spacing between boards, and 1 mm stacking receptacles available over a range of 17 to 20 mm.
  ・The plug connector can also be used as a mating connector for the flat cable connector DHD series.
  ・Complies with Lead Free regulations.

  CAD ：

  2D

  à partir de∗ ：	2.37 €
  Délai d'expédition minimum ：	67 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2.54mm (borne type à 2 rangée), série A1

  Hirose Electronic

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  • Remise sur volume

  à partir de∗ ：	1.31 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.8mm, hauteur 5 à 9mm, série FX6

  Hirose Electronic

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Remise sur volume

  à partir de∗ ：	1.91 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 1.27mm, hauteur 5 à 11mm, série FX4

  Hirose Electronic

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  • Remise sur volume

  à partir de∗ ：	2.50 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs pour branchement sur connecteur FPC / FFC, pas de 0.5 / 1mm - série FH12

  Hirose Electronic

  [Features]
  · The industry's first flip-lock ZIF connector.
  · Available in a wide array of variations with a proud track record lasting more than 10 years.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	1.91 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2.54mm (borne type à 1 rangée), série A2

  Hirose Electronic

  2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

  • Remise sur volume

  à partir de∗ ：	1.23 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  • Remise sur volume

  à partir de∗ ：	3.86 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble plat (type à usage général) - XG4

  OMRON

  The core of this printed circuit board connector is compliant with MIL standards.
  
  [Features]
  · The adoption of a new high-productivity design has delivered both high reliability and low costs.
  · A box type plug (XG4C type) that helps save space during installation is also available.
  · A press-fit type plug (XG4E type) that can be used as a relay is also available.
  · A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
  · The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
  · Complies with MIL standards (MIL-C-83503).
  · UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).

  • Remise sur volume

  à partir de∗ ：	1.21 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Série BLZF 3.5【50-100 pièces par conditionnement】

  WEIDMUELLER

  [Features]
  ・3.50-mm pitch spring connection.

  à partir de∗ ：	145.84 €
  Délai d'expédition minimum ：	2 jours

  *Prix unitaire/configuration de base

• 

  Série SL DN【50 pièces par conditionnement】

  WEIDMUELLER

  [Features]
  · Connectors for use with DeviceNet compliant circuit boards.

  à partir de∗ ：	293.27 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Série SL 3.5【1-100 pièces par conditionnement】

  WEIDMUELLER

  3.5mm pitch board side connector. Classic product.

  • Remise sur volume

  à partir de∗ ：	2.43 €
  Délai d'expédition minimum ：	2 jours

  *Prix unitaire/configuration de base

• 

  Série FFC

  HONDA TSUSHIN KOGYO

  Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
  
  [Features]
  • The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
  • Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
  • Can be used, in combination with the DIC series, as circuit-switching terminal plates.
  • Can select the number of contacts required.
  • Many pin lengths are available, so the user can select the appropriate length for a given.
  • Select the surface required: gold, tin, or copper.
  • Molds come in two colors (black and red).
  • Remover pin prevents backwards insertion.

  • Remise sur volume

  à partir de∗ ：	0.84 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série DIC

  HONDA TSUSHIN KOGYO

  2.54 mm pitch connector used for circuit switching and the like.
  
  [Features]
  • Many varieties available for combination with the FCC and HKP series.
  • Plating thickness is selectable according to cost requirements.
  • Insulator is UL-certified.
  • These connectors also come in 2, 3 and 4-series versions.

  • Remise sur volume

  à partir de∗ ：	0.93 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur avec pas de 0.3mm, hauteur 1mm, série FH26, pour connexion FPC

  Hirose Electronic

  This is a small, low profile ZIF connector. Improved space saving with a terminal pitch of 0.3 mm, helping to realize more compact and thinner equipment.

  • Remise sur volume

  à partir de∗ ：	2.42 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.4mm, hauteur 0.9mm - série DF30

  Hirose Electronic

  This is a 0.9-mm fit height, ultra-low profile board-to-board (FPC) connector. Allows for compact, thinner equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	2.04 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.4mm, hauteur 1.5 à 4.0mm, série DF40

  Hirose Electronic

  A 0.4-mm pitch board-to-board (FPC) connector. Select the height spacing between the circuit boards from 1.5 to 4.0 mm.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	1.70 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés de type blindé, pas de 0.4mm, hauteur 1.5mm, série FX12

  Hirose Electronic

  [Features]
  · A board-to-board connector with a full dual-layer shield structure.
  · The dual-layer shield offers powerful noise blocking and high shielding effectiveness.

  • Remise sur volume

  à partir de∗ ：	2.57 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur longue durée de vie, pas de 0.5mm, série FH40 - pour connexion verticale FPC / FFC

  Hirose Electronic

  This is a vertical connection type durable connector for FPC/FFC connection. Can perform the series of operations from FPC insertion to locking, reducing the number of connection man-hours.

  • Remise sur volume

  à partir de∗ ：	3.68 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs pour connexions FPC / FFC avec pas de 0.5mm et hauteur de 0.9mm, séries FH19C / SC

  Hirose Electronic

  [Features]
  ・These are small, low-profile, best-selling ZIF connectors.
  ・They contribute to thinner, smaller type equipment.

  • Remise sur volume

  à partir de∗ ：	2.58 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur FPC / FFC de construction robuste, pas de 0.5mm, hauteur 2.55mm, série FH28

  Hirose Electronic

  [Features]
  · A solidly built connector for FPC/FFC connections.
  · An FPC positioning mechanism provides highly reliable connections.
  In-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	2.27 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés, pas de 0.5mm, hauteur 2 à 3mm - série FX11

  Hirose Electronic

  [Features]
  · A board-to-board connector with a ground plate.
  · Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.

  • Remise sur volume

  à partir de∗ ：	3.22 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.5mm, hauteur 3 à 5mm, série DF12

  Hirose Electronic

  Connector for board to board connection with 0.5-mm pitch. Select the distance 3 mm to 5 mm between circuit boards by combining header and receptacle.
  
  [Features]
  · Available in a variety of board spacing dimensions.
  · In addition to ultra-small 0.5-mm pitch size, 3-mm, 3.5-mm, 4-mm, and 5-mm board spacing dimensions are available.
  · Supports automatic mounting.
  · The connector has an absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Equipped with reinforcement hardware for soldered joints.
  · Products with attached reinforcement hardware to prevent solder peeling are also available for mounting to FPCs.
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	1.78 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 0.5mm, hauteur 4 à 5mm) - série FX10

  Hirose Electronic

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  • Remise sur volume

  à partir de∗ ：	3.46 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.5mm, hauteur 4 à 8mm - série DF17

  Hirose Electronic

  Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	2.10 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 0.6mm, hauteur 3 à 4mm, série FX8

  Hirose Electronic

  The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm can be applied.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
  · Fit guiding.
  · Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
  · Prevents mis-insertion with circuit boards.
  · By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
  ・2-Piece Unit.
  ・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).

  • Remise sur volume

  à partir de∗ ：	2.54 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 0.6mm, hauteur 5 à 16mm) - série FX8C

  Hirose Electronic

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	2.94 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés (pas de 1mm, hauteur 4.3mm) - série DF9

  Hirose Electronic

  A board-to-board connector with a 1-mm pitch. The 31-pin, 41-pin comply with FPDI-1 standard connector specifications that have been adopted by VESA.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	1.99 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés pour connexions perpendiculaires avec pas de 1mm, série FX5

  Hirose Electronic

  A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
  
  [Features]
  · Number of pins, header-side height: 2 types.
  · 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
  · 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
  ·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
  ▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).

  • Remise sur volume

  à partir de∗ ：	2.52 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à raccordement par le bas avec pas de 2.54mm, série MDF7

  Hirose Electronic

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  • Remise sur volume

  à partir de∗ ：	1.46 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 2.54mm : Série HIF3H

  Hirose Electronic

  This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
  
  [Features]
  ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
  ・Compatibility: It can be combined with other HIF3 series connectors.

  • Remise sur volume

  à partir de∗ ：	2.15 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Embase à montant à connexion verticale, pas de 2.5mm, série MDF14A

  Hirose Electronic

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  • Remise sur volume

  à partir de∗ ：	1.29 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg avec pas de 2mm (borne type à 1 rangée), série A4

  Hirose Electronic

  2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.

  • Remise sur volume

  à partir de∗ ：	1.20 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Berg, pas de 2mm (borne type à 2 rangées) série A3【1-100 pièces par conditionnement】

  Hirose Electronic

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  à partir de∗ ：	1.20 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur circuit imprimé à câble avec verrou, pas de 7.92mm, avec prise en charge des intensités élevées - série DF22【1-100 pièces par conditionnement】

  Hirose Electronic

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	0.87 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PC Card compatible CardBus, série IC11S

  Hirose Electronic

  A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
  
  [Features]
  · PC Card Standard: Ground plate equipped with 8 connection ground points.
  ·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
  · Compatible with Type I, Type II, and Type III cards.
  · Includes terminal for ground clip.
  · Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
  · Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
  · Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
  · High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
  · Independent ejection mechanism used for easy removal of multiple high-output cards.
  · Many variations: with many variations, a type that matches to a particular set can be selected.
  · Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
  · The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
  · Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
  · Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
  · Also, POP-UP version 2 is approx. 12% lighter than version 1.

  • Remise sur volume

  à partir de∗ ：	6.30 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de carte CF séries MI20 / 21

  Hirose Electronic

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Remise sur volume

  à partir de∗ ：	4.05 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN10【1-100 pièces par conditionnement】

  Hirose Electronic

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Remise sur volume

  à partir de∗ ：	2.24 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN12

  Hirose Electronic

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Remise sur volume

  à partir de∗ ：	2.06 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série PCN13

  Hirose Electronic

  This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.

  à partir de∗ ：	2.37 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur arrière, capot de fiche pour cartes d'E/S

  Hirose Electronic

  This is an inner lock plug cover for back connector NX series for I/O cards.

  à partir de∗ ：	2.22 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs arrière série NX pour cartes d'E/S

  Hirose Electronic

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Remise sur volume

  à partir de∗ ：	5.10 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour carte microSD - série DM3

  Hirose Electronic

  A socket connector for use with the microSD Card TM. Available in a wide array of variations.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	2.28 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Connecteur micro-USB - série ZX

  Hirose Electronic

  Micro-USB connector supporting the USB 2.0 standard. Hirose Electric Group is an industry leader in standardization, offering a wide array of products.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	1.64 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

Loading...