Outils de sertissage / de soudure à haute pression（Page 2）

?* À propos du délai de livraison

• 

  JN1 Crimping Tool

  MISUMI

  One-touch, waterproof connector JN1 crimping tools

  • Remise sur volume

  à partir de∗ ：	615.19 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  5195 Connector Genuine Manual Crimper

  MISUMI

  Crimping tool for 5195 housing

  à partir de∗ ：	383.72 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir (pour le raccordement de bornes fermées avec revêtement isolant)

  LOBTEX

  [Features]
  - Meets JIS standards for closed terminals with insulated coating (CE), and demonstrates JIS terminal conducting performance 100%.

  à partir de∗ ：	80.10 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir hydraulique manuel AKH60N

  LOBTEX

  ● Lightweight and compact product with an overall length of just 360 mm. ●Auxiliary lever makes it possible to perform terminal retention easily with one hand.
  
  [Features]
  ▪ Connection band (sold separately) is used for the 3P phase terminal block of the TXWM100 and TXWM200. Can be placed on the power supply side or load side of a breaker produced by any manufacturer.
  · When a standard stud terminal block is used, load on the breaker can be reduced, and therefore a JIS standard crimped terminal and a one rank higher wire can be used.
  · If a branch terminal block (TXWM-D series) is used on the load side, branching is possible for up to 6 circuits with double wiring.
  - The connection band is a 3P1 set, and compatible products are available to fit different breaker types

  à partir de∗ ：	487.59 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Kit de bornes électriques

  LOBTEX

  [Features]
  · A lineup of crimp tools and terminals, centered on the most frequently used plug-in terminals, are incorporated into a set and presented in a plastic case.

  à partir de∗ ：	73.17 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Mini-outil de sertissage

  LOBTEX

  Internal molding check mechanism.
  
  [Features]
  - Powerful crimp with a small body
  - Pocket-sized with a lightweight and compact design that fits the hand comfortably.
  - Approximately 50% reduction in pattern load (compared to conventional 2 mm².)
  - Collar is neat.
  - Mold check mechanism built in to the main body.

  à partir de∗ ：	48.59 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outils de sertissage pour fils de cuivre, pour circuit imprimé

  LOBTEX

  ●Handle operation is much lighter, and a mold confirmation mechanism is built-in to the main body for a more compact package.
  
  [Features]
  - Handle operation is much lighter.
  - Mold confirmation mechanism is built in to the main body for a more compact package
  - Compared to conventional parts, the handle is narrower (approximately 20 mm when open), enabling temporary pressure on the terminal to be applied with one hand.

  à partir de∗ ：	46.49 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage, modèle robuste

  LOBTEX

  [Features]
  · Crimping operations for all sizes can be conducted easily by simply turning the rotary format female die.
  · Includes an adjustment dial to enable crimping operations with simple operations tailored to the strengths of individual operators.

  • Remise sur volume

  à partir de∗ ：	169.76 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir hydraulique manuel AKH150S

  LOBTEX

  [Features]
  - Fast forwarding mechanism
  - Turn the handle 1-2 times to quickly temporarily hold the terminal, and 4-5 times for speed crimping. Return speed is only 3 seconds.
  - The head can be rotated up to 180°.

  à partir de∗ ：	653.35 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-704)

  HOZAN

  For use with solderless crimping, insulated crimping terminals, simple handling terminals, 1.25 to 2.0 sleeves, and M3, 3.5, and 4 screw cutters.
  
  [Features]
  · Screw cutter: 3 mm, 3.5 mm, and 4 mm.
  · Wire strippers: 0.3 mm², 0.50 mm², 0.75 mm², 1.25 mm², and 2 mm².
  · Applicable size: 1.25/2.
  · Weight: 210 g.

  à partir de∗ ：	37.03 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-732)

  HOZAN

  For use with solderless crimp sleeves and solderless crimp terminals. JIS C9711 certified product. Includes a molding confirmation mechanism and die engraver. Terminals supported: 1.25 and 2.0. Overall length: 180 mm.
  
  [Features]
  · The maximum opening width of the handle is a compact 110 mm, so this product can be operated one-handed.
  · Applicable size: 1.25/2.
  · Weight: 270 g.

  • Remise sur volume

  à partir de∗ ：	58.12 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-740)

  HOZAN

  Can be used for crimping operations for BNC, TNC, and BNCC center connectors and ferrules. Includes a molding check mechanism. (With lever for unlocking)
  
  [Features]
  · Crimp tool used for measuring equipment, computer LANs, broadcasting equipment, etc., and for BNC, TNC, and BNCC connectors.
  · The center contact and sleeve (retaining ring) can be crimped.
  · Weight: P-740350 g/P-741360 g.

  à partir de∗ ：	82.53 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-741)

  HOZAN

  Crimping tool for crimping operations for BNC, TNC, and BNCC center connectors and ferrules. Includes a molding check mechanism. (With lever for unlocking)
  
  [Features]
  · Crimp tool used for measuring equipment, computer LANs, broadcasting equipment, etc., and for BNC, TNC, and BNCC connectors.
  · The center contact and sleeve (retaining ring) can be crimped.
  · Weight: P-740350 g/P-741360 g.

  à partir de∗ ：	82.78 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-77)

  HOZAN

  For use with ring sleeves. JIS C9711 certified by ECEE. Includes a molding check mechanism and die engraving. Terminals supported: ultra-small, small, medium, and large ring sleeves. Overall length: 286 mm.
  
  [Features]
  · This crimping tool supports small (including 1.6 x 2), medium, and large ring sleeve crimping sizes.
  · Sizes supported: small (1.6 x 2), medium, large.
  · Weight: 430 g.

  à partir de∗ ：	58.68 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Applicateur ICT

  NICHIFU TERMINAL INDUSTRIES

  This product has built-in functions for ICT automatic feeding, as well as for cutting and crimping molded items, which simplifies terminal crimping processes.
  
  [Features]
  · A new locking mechanism, which was created by adding springs to a portion of the terminal, allows this product to achieve a secure standard of safety and a high level of connectivity (for use with micro switches).

  Délai de livraison minimum ：	Devis

• 

  Outil manuel

  NICHIFU TERMINAL INDUSTRIES

  This tool utilizes a ratchet mechanism.

  • Remise sur volume

  à partir de∗ ：	46.64 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Machine de sertissage en forme de chaîne

  NICHIFU TERMINAL INDUSTRIES

  [Features]
  Allows a variety of types of chain-shaped terminals to be easily crimped through the use of replaceable applicators. (NCM)

  Délai de livraison minimum ：	Devis

• 

  Outil de sertissage (P-706)

  HOZAN

  For use with open barrel terminals. Easy operations model. Sizes: 1.4 to 3.7. Coated circular crimping: 1.8φ, 2.54φ, and 4.0φ head size. Plate thickness (mm): 2.1 - to 2.6.
  
  [Features]
  · Appropriate for use with crimping for small contact pins (the die part includes steps and is finished thin).
  · Wire sizes supported: AWG #28 to #14.
  · Weight: 200 g.

  à partir de∗ ：	50.01 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-711)

  HOZAN

  For use with 8-core modular plugs. Includes a formation confirmation mechanism. Terminals supported: FCC standard RJ-45 and 48 (8 core). Overall length: 181 mm.
  
  [Features]
  · This product is a dedicated crimping tool for use with mounting 8-core modular plugs to 8-core modular cords.
  · Supported sizes: FCC standard modular plugs, RJ-45 and 48 (8-core).
  · Weight: 280 g.

  à partir de∗ ：	290.35 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-722)

  HOZAN

  Attachments include a solderless crimp sleeve, wire stripper for solderless terminals, and wire cutters. Support for 1.25 and 2.0 terminals with a total length of 180 mm.
  
  [Features]
  - Applicable size: 1.25/2.
  - Weight: 275 g.

  à partir de∗ ：	56.42 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-736)

  HOZAN

  This is a formation confirmation mechanism for use with closed end terminals with insulated coatings. Includes die engraving. Terminals supported: CE1, CE2, and CE5. Overall length: 198 mm.
  
  [Features]
  · This product can be used for crimping CE1, CE2, and CE5 terminals.
  · It is very compact, and can be used to conduct crimping operations with a light grip.
  · Sizes supported: CE1, CE2, and CE5.
  · Weight: 300 g.

  à partir de∗ ：	65.20 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-75)

  HOZAN

  [Features]
  · Applicable size: 1.25/2/5.5/8 sq.mm.
  · Weight: 390 g.
  · For use with solderless crimp sleeves and solderless crimp terminals. JIS C9711 certified product. Includes a molding confirmation mechanism and die engraver. Terminals supported: 1.25/2/5.5/8 sq.mm. Overall length: 270 mm.

  à partir de∗ ：	56.74 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Machine de sertissage électrique - modèle d'atelier ICT

  NICHIFU TERMINAL INDUSTRIES

  The chain-shaped terminal (ICT) offers auto-feed, making it more efficient and able to perform uniform terminal crimping operations. (NCM)
  
  [Features]
  · As long as you have a 100 V power supply, this product can be used for crimping 0.3 mm³ to 5.5 mm³ on ICT chain-shaped crimp terminals with insulated coatings and CT solderless chain-shaped crimp terminals.
  · The ICT applicator can be easily replaced with its one-touch button because it uses an anchoring method through its one-touch base.
  · Operation so simple anyone can do it.

  à partir de∗ ：	6,557.91 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Applicateur

  NICHIFU TERMINAL INDUSTRIES

  The wire core and coating pressure levels can be adjusted with the dial.
  
  [Features]
  · The ICT applicator has built-in functions for ICT automatic feeding, as well as for cutting and crimping molded items, which simplifies terminal crimping processes.
  · This product has a compact design.
  · The coating area pressure for wires can be adjusted with the adjustment dial.

  Délai de livraison minimum ：	Devis

• 

  Manchon à bague pour outil de sertissage (pour produits E)

  LOBTEX

  ●Supports crimping of ring sleeve E (VA sleeve). ●An essential tool for the Electrician Proficiency Examination.
  
  [Features]
  - Lobtex.
  - Supports crimping of ring sleeve E (VA sleeve).
  - An essential tool for the Electrician Proficiency Examination.

  à partir de∗ ：	47.44 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil dédié pour fiche modulaire

  HellermannTyton

  This is a dedicated tool for use with the RJ45 modular plug. Use with plug (MPC5E3C2P). Made with workability in mind, it is easy to grip and compact in size.
  
  [Features]
  - A dedicated tool for jacks and plugs, etc.
  - Made with workability in mind, it is easy to grip and compact in size.

  • Remise sur volume

  à partir de∗ ：	248.06 €
  Délai de livraison minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir manuel

  JST

  A convenient manual tool for testing and maintenance of small-lot contacts. The 2-layer configuration of wire core crimping and coating crimping blades can be used for manual crimping operations.

  • Remise sur volume

  à partir de∗ ：	107.67 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-737)

  HOZAN

  [Features]
  This compact crimping tool supports small (including 1.6 x 2) and medium crimping sizes. This item is compact, and can perform crimping operations with a light grip.

  à partir de∗ ：	62.12 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage (P-743)

  HOZAN

  [Features]
  - After crimping, a mark is made to show which die was used on the terminal.
  - Die shape firmly holds the wire insulation.
  - By adjusting the handle opening width with the adjustment mechanism, work can be done in confined spaces.

  à partir de∗ ：	86.29 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage et de soudure

  TO-CONNE

  This tool can be used for crimping and pressure welding operations for coaxial connectors and modular connectors.

  • Remise sur volume

  à partir de∗ ：	203.52 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Pour bornes et manchons sertis nus (outil hydraulique manuel)

  IZUMISEIKI

  For cramping bare crimp terminals within the applicable range (14 - 150 mm².). UL, JIS standard product. (Made by Izumi Products)

  à partir de∗ ：	694.20 €
  Délai de livraison minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Revêtement isolant pour points de connexion fermés (outil manuel, utilisation à une main)

  IZUMISEIKI

  Manual crimping tool for closed end connector (Scope: CE-1 - CE-2 - CE-5) with insulation. UL, CSA standard product. (Made by Izumi Products)

  • Remise sur volume

  à partir de∗ ：	89.18 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Pour bornes et manchons sertis nus (outil manuel, utilisation à une main)

  IZUMISEIKI

  Manual crimping tool for bare crimp terminals within the applicable range (1.25, 2, 3.5, 5.5 mm².). Conforms to UL &JIS standards. (Made by Izumi Products)

  • Remise sur volume

  à partir de∗ ：	97.94 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Borne sertie à revêtement isolant, pour manchon (outil manuel, type à main)

  IZUMISEIKI

  Tool for crimp terminal (Scope: wire size 2 mm2) with insulation. Conforms to UL & CSA standards. (Made by Izumi Products)

  • Remise sur volume

  à partir de∗ ：	95.54 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Borne sertie à revêtement isolant, pour manchon (outil manuel, type à main)

  IZUMISEIKI

  Tool for crimp terminal (Scope: wire size 1.25 mm2) with insulation. Conforms to UL & CSA standards. (Made by Izumi Products)

  à partir de∗ ：	94.94 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Revêtement isolant pour points de connexion fermés (outil manuel, utilisation à une main)

  IZUMISEIKI

  Manual crimping tool for closed end connector (Scope: CE-2 - CE-5 - CE-8) with insulation. UL, CSA standard product. (Made by Izumi Products)

  • Remise sur volume

  à partir de∗ ：	96.79 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir et accessoires pour outil à sertir série Han

  Harting

  Dedicated genuine manual crimping tool for use with E-type and D-type contacts. (Models are separated using "-" rather than spaces)

  à partir de∗ ：	7.25 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage série CB01

  SUMIKO TEC

  This is a genuine crimping tool for dedicated use with CB01 series contacts.

  • Remise sur volume

  à partir de∗ ：	661.75 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage pour borne sertie

  PRESSMASTER

  Compressed tools for compressed terminals

  à partir de∗ ：	105.81 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outils à sertir pour bornes serties isolées

  PRESSMASTER

  Crimp Tools for Insulated Crimp Terminals

  à partir de∗ ：	97.91 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil à sertir pour connecteur coaxial

  PRESSMASTER

  Crimp tool for coaxial connector

  à partir de∗ ：	94.57 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Outil de sertissage pour connecteur BNC

  JEFCOM

  This product utilizes a ratchet mechanism for easy crimping operations, and can also be used with one hand. Please note that Canare type connectors are not supported.

  à partir de∗ ：	85.11 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Support de connecteur BNC

  JEFCOM

  When installing a BNC connector on a coaxial cable, this tool holds the BNC connector in place. This product is available in both right-handed and left-handed versions.

  à partir de∗ ：	12.85 €
  Délai de livraison minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Filières de rechange

  JEFCOM

  These are replacement dies for the BNC Connector Crimping Tool. Please note that Canare type connectors is not supported.

  à partir de∗ ：	36.81 €
  Délai de livraison minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Dénudeur de câbles coaxiaux

  JEFCOM

  This product can also be used with FB coaxial cables, environmentally friendly coaxial cables, and triple-shielded coaxial cables for satellite use. This cable stripper can also be finely adjusted for precision stripping, which makes it a pleasure to use.

  à partir de∗ ：	28.98 €
  Délai de livraison minimum ：	8 jours

  *Prix unitaire/configuration de base

Loading...