?* À propos du délai d'expédition

• • Recommandation

  

  Passe-fils avec film série SG【10 pièces par conditionnement】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Grommet with film. (SG)

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	2.59 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Passe-fils série NG【10 pièces par conditionnement】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Grommet (NG)

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	1.87 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Petits bouchons à trous série MHD【10 pièces par conditionnement】

  TAKACHI ELECTRONICS ENCLOSURE

  Small Hole Plugs (MHD)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  à partir de∗ ：	1.69 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Open Model / Screw Tightening Model Edge Guard)【1-10 pièces par conditionnement】

  MISUMI

  Screw tightening-model wire protection bushing. (It is not a mechanism for holding the wire, but rather is a mechanism which the wire passes through.)

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	7.63 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Open Model / Slitting )【100 pièces par conditionnement】

  MISUMI

  The attachment of a bushing is possible by allowing the wires to pass through the panel hole.

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	8.20 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Grommet / Rubber with Membrane Model)【5 pièces par conditionnement】

  MISUMI

  Grommet with rubber membrane. 1 pack contains 5 pieces. The incoming line outer diameter is φ4.5 mm to φ80 mm.

  à partir de∗ ：	4.45 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Presse-étoupe à liaison multiple : manchon en caoutchouc

  MURRPLASTIK

  Rubber bushing for multi-link cable gland

  • Remise sur volume

  à partir de∗ ：	3.39 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bush (Code Stopper)【100 pièces par conditionnement】

  MISUMI

  Low-price cord stopper to attached the power cord to the panel and protect the cord

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	6.71 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Gland Panel Rubber Gasket for Mounting【10 pièces par conditionnement】

  MISUMI

  Panel mount packing of ST / BS series gland

  • Remise sur volume

  à partir de∗ ：	2.59 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Locknut for Cable Gland【10 pièces par conditionnement】

  MISUMI

  Lock nut for the cable gland panel mount

  • Remise sur volume

  à partir de∗ ：	4.95 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Multiple Model Cable Gland - Rubber Bush

  MISUMI

  Rubber bushings for clustered-model cable glands

  • Remise sur volume

  à partir de∗ ：	3.62 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Buse BN

  AMERICAN DENKI

  · Bushing made of Nylon resin that protects cords and tubing in through-holes. Made of Nylon plastic which excels in shock resistance.
  
  [Features]
  · A flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is screw type with threads only.
  Pushing the BN cap and the B nozzle is only a one-touch push; can easily fitted and installed.
  The internal diameter of the nozzle comes in a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	13.52 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Bouchon de φ25 pour trou de réserve

  KASUGA ELECTRIC

  [Features]
  · A rubber cover for enhancing the appearance vacant panel holes.
  · Light beige color (Munsell 5Y7/1 EQUIV). For ⌀ 25-mm diameter holes.

  • Remise sur volume

  à partir de∗ ：	1.98 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Évent de protection type PMF

  TAKACHI ELECTRONICS ENCLOSURE

  PMF Type Protective Vent
  
  [Features]
  The protective vent can adjust for the pressure changes within the enclosure, where hot and cold differences in temperature are generated. It does so via a membrane filter that allows ventilation, but not water or dust.
  In addition, there are measures to discharge water vapor to prevent condensation within the enclosure.
  There are specifications for IP68 (water depth 2M/1hr.) waterproof and dustproof performance, for flame resistance in the range from -40°C to 125°C, and for harsh environments such as outdoor workplaces.
  Added high air flow PMF-12HA.
  For outdoor installation, mounting on a side surface is recommended.
  This product is for use only in the electronics industry.
  Not to be used for production facilities dealing with foodstuffs, cosmetics, drugs, or medical devices.

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	7.92 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Protection d'arête : protecteurs d'arête avec adhésif【1-50 pièces par conditionnement】

  HellermannTyton

  [Features]
  · Includes adhesive for firm, rapid, and precise mounting to the panel cutout.
  · Transparent adhesive for a beautiful finish.
  · 20 m reeled version available to be cut to desired lengths, as well as a convenient bagged version for smaller 250 mm cut lengths.
  · A small box on the reeled version provides reference gradations when cutting, and it can be used as a functional storage box.

  • Remise sur volume

  à partir de∗ ：	28.84 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Buse BN à manchon【1-10 pièces par conditionnement】

  AMERICAN DENKI

  [Features]
  ・ Nylon resin with superior heat resistance, impact resistance and abrasion resistance.
  ・ Can be used in a wide range of applications such as boards and concrete walls, peripheral equipment of machinery and office equipment.
  ・ Both the inner ends are chamfered to ensure that the thing passing through the nozzle is less likely to be scratched.

  • Remise sur volume

  à partir de∗ ：	6.82 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bush (Hidden / M Screw)【1-100 pièces par conditionnement】

  MISUMI

  Hidden cap to close the M screw round hole

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	7.71 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bush (Hidden / PG Screw)【1-100 pièces par conditionnement】

  MISUMI

  Hidden cap to close the PG screw round hole

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	6.61 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Open Model)【100 pièces par conditionnement】

  MISUMI

  Snap bushings that can be mounted with one-touch operation

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	7.27 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Blind Gray / Ivory)【100 pièces par conditionnement】

  MISUMI

  Ivory color and gray color of the blind cap

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	15.42 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Blind / Black)【100 pièces par conditionnement】

  MISUMI

  Black blind cap that can be mounted with one-touch operation

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	10.07 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Cable Bushing (Grommets / Open Model)【5 pièces par conditionnement】

  MISUMI

  Rubber-made open-model grommets. The incoming line outer diameter is offered in plenty of sizes from φ6 mm to φ45 mm.

  • Remise sur volume

  à partir de∗ ：	5.08 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  U-Shaped Bushing (Standard Model)【5 pièces par conditionnement】

  MISUMI

  Protective bushing that can be mounted to edges of a square hole

  • Remise sur volume

  à partir de∗ ：	8.47 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  U-Shaped Bushing (Flexible Model)【20-100 pièces par conditionnement】

  MISUMI

  Protection bushing that is suitable for mounting a modified shape opening.

  • Remise sur volume

  • Flame-Retardant

  à partir de∗ ：	3.50 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  U-Shaped Bushing (Flexible Model)

  MISUMI

  Opening protective bushing with excellent flexibility

  • Remise sur volume

  à partir de∗ ：	11.84 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  U-Shaped Bushing (with Slits), Square Hole, Edge Guard Compatible

  MISUMI

  Protective bushing containing slit that is suitable for the transformation of the opening.
  Extra 1 m cut selling goods, which is ideal for using small amounts.
  Generally 100 m is sold

  • Remise sur volume

  à partir de∗ ：	127.12 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 60 dédié, blanc)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 60), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is white.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	14.85 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 60 dédié, noir)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 60), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	29.91 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, pièce de raccordement

  AMERICAN DENKI

  Bushing series ring with internal thread for extension, for which the length can be adjusted by combination.

  • Remise sur volume

  à partir de∗ ：	3.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, outil de raccordement

  AMERICAN DENKI

  This is a dedicated bind tool for the bushing series whose length can be adjusted by combining bushings.

  à partir de∗ ：	1.59 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, bride

  AMERICAN DENKI

  This is a terminal with flange used for the outer wall of a bushing series that can adjust length through combination.

  • Remise sur volume

  à partir de∗ ：	3.88 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, bague de 20mm

  AMERICAN DENKI

  This is a bushing series extension use ring with female screw (length 18 mm) for which the length can be adjusted by combination.

  • Remise sur volume

  à partir de∗ ：	3.74 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, bague de 30mm

  AMERICAN DENKI

  Bushing series ring (length 29 mm) with internal thread for extension for which the length can be adjusted by combination.
  
  [Features]
  · Bushing made of Nylon resin that protects cords and tubing in through-holes.
  · A new form nozzle system makes length adjustments possible, depending on the combination.
  · Quick removal and attachment using a one-touch screw in all kinds of locations around products and equipment.
  · Length is freely adjusted.
  · This one will not break.
  · Various combinations can be constructed using a one touch screw requiring only turning, for joints stable JIS metric trapezoidal threads (Tr60x3) are used.
  The dimensions of the mounting holes is ⌀65-compatible (core drills are available), and using the cap (JB5C), opening and closing of the through holes is possible, if necessary.
  Prepare a binding tool (JB5T) that can be easily and securely constructed.
  A "free effective length" is sought by an extensive lineup and parts.
  The used Nylon resin is resin that maintains a good balance of heat resistance, oil resistance, abrasion resistance, and chemical resistance.
  Excels in the environment because it does not include flammable material (UL94V-0) or toxic substances and it is possible to obtain a safe environment because recycling is possible.
  Does not expose to the outside air cables or cords in any environment; protects from corrosion or pest damage.

  • Remise sur volume

  à partir de∗ ：	3.72 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, bague de 50mm

  AMERICAN DENKI

  An extension ring (length 50 mm) with internal threads for the bushing series, whose length can be adjusted by combining bushings.

  • Remise sur volume

  à partir de∗ ：	4.97 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon en caoutchouc pour fils de 22mm2

  AMERICAN DENKI

  A bushing that can be used in 100 A plugs and connector bodies eliminates gaps between the cord aperture and wires.

  • Remise sur volume

  à partir de∗ ：	6.38 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 30 dédié, blanc)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 30), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	9.07 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 30 dédié, noir)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 30), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	9.07 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 40 dédié, blanc)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 40), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is white.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	11.02 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 40 dédié, noir)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 40), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	11.02 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 50 dédié, blanc)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using it in combination with the BN nozzle (inner diameter: 50), foreign material can be prevented from entering into a pipe or through a hole or a thing penetrating through an equipment or panel no longer requiring a through hole. The product is white in color.
  
  [Features]
  ・ The cap is made of a flame retardant nylon resin that does not contain toxic substances and has a good balance of heat resistance, impact resistance, abrasion resistance, oil resistance, chemical resistance and tracking resistance characteristics.
  ・ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ・ BN nozzle is of one-touch screw in type.
  ・ BN caps and BN nozzles are one-touch push in type fittings that can easily interlock into each other.
  ・ A vast range of small and large internal diameter BN nozzles is available, the internal diameter of the small-diameter nozzles being in the range of ⌀8–⌀120.
  ・ The products are available in two colors - black and white - such that they can be used with the items of any color.

  • Remise sur volume

  à partir de∗ ：	12.35 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capuchon BN (diamètre interne de buse BN : 50 dédié, noir)【5 pièces par conditionnement】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 50), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  • Remise sur volume

  à partir de∗ ：	19.44 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, capuchon

  AMERICAN DENKI

  Flange lid for the bushing series whose length can be adjusted by combining bushings.

  • Remise sur volume

  à partir de∗ ：	3.41 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, jeu

  AMERICAN DENKI

  This is a bushing ring series set product (a set of 2 flanges and 20 rings) that can be used in various combinations to adjust length.

  • Remise sur volume

  à partir de∗ ：	9.62 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Manchon de raccordement, diamètre interne 50, bague de 25mm

  AMERICAN DENKI

  Bushing series ring (length 24mm) with internal thread for extension for which the length can be adjusted by combination.
  
  [Features]
  · Bushing made of Nylon resin that protects cords and tubing in through-holes.
  · A new form nozzle system makes length adjustments possible, depending on the combination.
  · Quick removal and attachment using a one-touch screw in all kinds of locations around products and equipment.
  · Length is freely adjusted.
  · This one will not break.
  · Various combinations can be constructed using a one touch screw requiring only turning, for joints stable JIS metric trapezoidal threads (Tr60x3) are used.
  The dimensions of the mounting holes is ⌀65-compatible (core drills are available), and using the cap (JB5C), opening and closing of the through holes is possible, if necessary.
  Prepare a binding tool (JB5T) that can be easily and securely constructed.
  A "free effective length" is sought by an extensive lineup and parts.
  The used Nylon resin is resin that maintains a good balance of heat resistance, oil resistance, abrasion resistance, and chemical resistance.
  Excels in the environment because it does not include flammable material (UL94V-0) or toxic substances and it is possible to obtain a safe environment because recycling is possible.
  Does not expose to the outside air cables or cords in any environment; protects from corrosion or pest damage.

  • Remise sur volume

  à partir de∗ ：	3.55 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon libre【100 pièces par conditionnement】

  KAMEDA DENKI

  Mounts to and protects end surfaces, cut surfaces, and openings of a panel.
  
  [Features]
  · Mounts to the cut surface of a panel and protects electrical wires.
  · This is cut and used based on hole periphery and so is compatible with holes of all sizes and can be used freely with even or uneven holes.
  · Can be elongated for use in the case of a larger hole.
  · Excellent electrical and wear resistance.

  • Remise sur volume

  à partir de∗ ：	17.28 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...