Roues avec arbres（Page 2）

?* À propos du délai de livraison

• 

  Rabat nano【5 pièces par conditionnement】

  YANASE

  There is no clogging due to the ultra-thin mesh structure, allowing for uniform processing.
  
  [Features]
  · High grade precision work.
  · Nano-flap is a flap made with flexible sandpaper using ultra fine mesh base fabric.
  · There is little clogging due to the ultra-thin mesh structure, allowing for uniform processing and a long service life.

  • Remise sur volume

  à partir de∗ ：	34.69 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Roue Unilon avec arbre (dur)【10 pièces par conditionnement】

  YANASE

  Ideal for removal of scratches and rust. Can also be used for hairline finishing.
  
  [Features]
  · Selectable from abundant granularity and sizes.
  · It removes burrs without scraping, with no secondary burrs.
  · As it is soft, elastic and has good adaptability, it prevents fatigue.

  • Remise sur volume

  à partir de∗ ：	29.52 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Buffle de petit diamètre【5 pièces par conditionnement】

  YANASE

  Various materials are available, such as cotton, chamois, flannel, muslin, wool, emery, hemp, etc.

  • Remise sur volume

  à partir de∗ ：	14.93 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Cône en papier L / A【50 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	45.50 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Feuille d'aluminium en polyéthylène【5 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	39.38 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Micro rabat【10 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	41.88 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Champignon Unilon【5-10 pièces par conditionnement】

  YANASE

  Prevents overcutting of the workpiece and fits better to rounded surfaces.
  
  [Features]
  · Fits snugly due to the mushroom shape.
  · Heat dissipation effects are achieved by making an overlapping layer of Unilon non-woven fabric of the same size.
  · Further, since the Unilon fibers are compressed closer to the head, the strength is higher than the lower part.
  · Tangled Unilon fibers act as a cushion, preventing over-grinding of the materials being abraded.
  · Fits better to rounded surfaces.

  • Remise sur volume

  à partir de∗ ：	49.41 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roue avec arbre fendu【5-10 pièces par conditionnement】

  YANASE

  Polishing cloth is finely slit to enable polishing of curved and uneven surfaces.
  
  [Features]
  · The slit allows soft polishing.
  · The polishing cloth is finely slit, thus ideal for polishing fine parts.
  · It is elastic, easy to fit to the workpiece.
  · Due to heat dissipation, it does not alter the polished material.
  · Its autogenous properties help prevent clogging, ensuring uniform polishing throughout.

  • Remise sur volume

  à partir de∗ ：	53.16 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roue Unilon avec arbre【5-10 pièces par conditionnement】

  YANASE

  Prevents over-scraping, and produces a uniform finished surface with no clogging.
  
  [Features]
  · Unilon's standard product.
  · Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
  · Its autogenous properties prevent clogging.
  · Polishes without scratching.
  · Finishes the surface without scraping the material.
  · Flexible and fits perfectly to the curved surfaces.

  • Remise sur volume

  à partir de∗ ：	42.71 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Roue en sisal avec arbre【5 pièces par conditionnement】

  YANASE

  Ideal for pre-polishing polish with a cotton wheel.
  
  [Features]
  · For semi-finishing of mirror finishing.
  · Alumina oxide permeated type.
  · Finishing and polishing of stainless steel, aluminum and other materials.
  · For scorch removal.
  · For polishing before a mirror finish.
  · Ideal for polishing prior to cotton wheel polishing

  • Remise sur volume

  à partir de∗ ：	28.68 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Arbre de rouleau de cartouche【1-10 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	7.91 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Support de cône【10 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	60.20 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Roue FF【5 pièces par conditionnement】

  YANASE

  Felt buff processed into flap shape for less clogging and burning.
  
  [Features]
  · For polishing and wiping with soft contact.
  · Felt sheet cut into smaller pieces and processed into a flap shape for less clogging and burning.
  · Use with application of abrasive.

  • Remise sur volume

  à partir de∗ ：	30.33 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Fût

  YANASE

  Holder for the UNI Band.

  • Remise sur volume

  à partir de∗ ：	6.34 €
  Délai de livraison minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Roue en feutre avec arbre, type imprégné【10 pièces par conditionnement】

  YANASE

  The product is permeated with alumina oxide, so it can be used as is.

  à partir de∗ ：	44.82 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Nouveau recouvrement souple type monté【14 pièces par conditionnement】

  UHT

  • Remise sur volume

  à partir de∗ ：	27.21 €
  Délai de livraison minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Bande super diamant【5 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	59.72 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Bande diamant【10 pièces par conditionnement】

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	30.30 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Micro rabat diamant

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	15.12 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Rabat super diamant

  ICHIGUCHI

  • Remise sur volume

  à partir de∗ ：	19.81 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Cône d'amortissement【5 pièces par conditionnement】

  YANASE

  Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.

  • Remise sur volume

  à partir de∗ ：	5.48 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Support de cône d'amortissement

  YANASE

  Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
  
  [Features]
  · Attachment when using a cushioning cone.
  · Superb elasticity with the dedicated sponge.

  • Remise sur volume

  à partir de∗ ：	9.58 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Top à usage unique avec arbre【10 pièces par conditionnement】

  YANASE

  [Features]
  · This is the product you always wanted.
  · The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
  · Capable of heavy polishing with a soft touch.
  · It is a retractable type, providing a large polishing area and beautiful finished surface.
  · One-touch shaft attachment

  • Remise sur volume

  à partir de∗ ：	22.21 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Mini roue à rabat【5 pièces par conditionnement】

  NEWREGISTON

  à partir de∗ ：	24.31 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  "Rabats avec arbre" (aucune fixation métallique, diamètre de l'arbre 3mm)

  MURAKO

  à partir de∗ ：	4.80 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Rabats avec arbre" (aucune fixation métallique, diamètre de l'arbre 6mm)

  MURAKO

  à partir de∗ ：	5.74 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Rabats avec arbre" (aucune fixation métallique, diamètre de l'arbre 6mm)

  MURAKO

  à partir de∗ ：	4.82 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue en feutre fendue avec arbre" (diamètre de l'arbre : 6mm)

  MURAKO

  à partir de∗ ：	9.96 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Ponceuse à fibre" (diamètre de l'arbre : 3mm)【10 pièces par conditionnement】

  NAKANISHI

  [Features]
  · A fiber sander using non-woven nylon fibers.
  · Having outstanding flexibility, it softly polishes and finishes flat and curved surfaces without scratching.
  · It can be used on a sander to process with the softest touch.
  [Applications]
  · Can be used to finish everything from general steel to woodwork and plastics.
  · Hairline machining or finishing of stainless steel and aluminum.
  · Pretreatment for painting or welding, rust and dirt removal.

  • Remise sur volume

  à partir de∗ ：	28.81 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Ponceuse à éponge" (diamètre de l'arbre : 3mm)【3 pièces par conditionnement】

  NAKANISHI

  [Features]
  · A sander that uses heavy duty polyester fibers.
  · Having outstanding flexibility, it softly polishes flat and curved surfaces alone without scratching.
  · Multiporous with almost no clogging. Reduces heat generation on surfaces being treated.
  · Heavy duty fibers retain abrasive particles for excellent durability.
  [Applications]
  · For micro deburring of metal products.
  · For repairing rust and scratches as well as light polishing.
  · Polishing of stainless steel, copper, brass, aluminum, etc.

  à partir de∗ ：	27.04 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Buffle souple stratifié" (diamètre de l'arbre 3mm)【5-10 pièces par conditionnement】

  NAKANISHI

  [Features]
  · A soft buff that can be fixed to various raw materials with a small diameter flange.
  · Final finishing, polishing, dirt removal, etc. can all be done to a gentle finish with the use of a polishing agent.
  [Applications]
  · Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.

  à partir de∗ ：	40.21 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Buffle en feutre" (diamètre de l'arbre : 3mm)【10 pièces par conditionnement】

  NAKANISHI

  [Features]
  · Durability is significantly enhanced by the compression and high density of the high-quality wool (100%).
  · Uniformly crimped wool greatly increases the permeability of the abrasive, achieving stable finishing.
  [Applications]
  · Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.

  à partir de∗ ：	23.85 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Mini roue à rabat en papier" (diamètre de l'arbre : 3mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end. It has a high heat dissipation effect to prevent distortion of the workpiece. Can be used for any type of polishing, including inner surfaces, curved surfaces, and flat surfaces. The rotational speed can be adjusted to polish (hairline processing possible) everything from soft to hard materials.
  [Applications]
  · For polishing small irregular shapes, such as semicylindrical interior and corner parts.
  · Tool used: micro grinder. (Pneumatic/Electric)

  à partir de∗ ：	23.17 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat avec arbre diamant" (type tout en diamant / diamètre de l'arbre : 3mm)

  TRUSCO NAKAYAMA

  [Features]
  · For glass, stone and non-ferrous metals. Precision finishing can be done with high polishing power.
  · Electrodeposited genuine all diamond sheet is used.
  [Applications]
  · For surface polishing of difficult-to-cut materials, polishing on the inner surface and curved surface.
  · Tool used: straight grinder.

  à partir de∗ ：	14.68 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Roue à rabat (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end.
  · It can be used to polish anything including inner surface, curved surface and flat surface.
  · Only the side can be used. As it has a shaft, it can be used flexibly, and the direction of the hairline is constant.
  · Fits well onto the shape of the workpiece to be processed.
  · Autogenous action enables continuous grinding with new abrasive surfaces constantly formed.
  · It has a high heat dissipation effect to prevent distortion of the workpiece.
  [Applications]
  · Commercially available electric grinder, electric drill, drilling machine, etc.
  · Deburring, rust removal, pre-coat polishing, inner-surface and curved-surface polishing, polishing of metal surface.
  · Tool used: straight grinder. (Pneumatic/Electric)

  à partir de∗ ：	18.87 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat fileté rotative" (arbre remplaçable / diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Shaft is screw-in type, so mounting and removing can be done with one touch.
  · Shaft can be replaced while chuck is mounted.
  · By using a spin shaft (sold separately), shaft length can be changed for standard length (40 mm) and hole depth (100 mm).
  [Applications]
  · For rust removal, deburring, and brazing.
  · Polishing interior of cylinders, corners, etc.
  · Tools used: straight grinder (pneumatic/electric) / electric drill / drilling machine.

  à partir de∗ ：	20.70 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat fileté rotative" (arbre remplaçable / diamètre de l'arbre : 6mm), arbre rotatif (diamètre de l'arbre : 6mm)

  TRUSCO NAKAYAMA

  [Features]
  · Shaft is screw-in type, so mounting and removing can be done with one touch.
  · Once chuck power section is mounted to shaft, polished section can be changed.
  · 2 items: standard shaft length (SS-6040) (40 mm), for deep holes (SS-6100) (100 mm).
  [Applications]
  · Shaft for spin screw type flap wheels.

  à partir de∗ ：	2.41 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat Miracle" (type diagonal / diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals.
  · Has diagonally attached flaps and gently contacts workpieces.
  · It utilizes the characteristics of a general-purpose flap wheel with shaft to improve the grindability and sustainability. (Increased by 30% compared to conventional)
  [Applications]
  · For rust/corrosion removal, deburring, and pipe internal surface polishing.
  · For grinding metals, curved surfaces of wood, and irregularly shaped items.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	22.49 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat avec arbre diamant" (type tout en diamant / diamètre de l'arbre : 6mm)

  TRUSCO NAKAYAMA

  [Features]
  · For glass, stone and non-ferrous metals. Precision finishing can be done with high polishing power.
  · Electrodeposited genuine diamond sheet is used.
  [Applications]
  · For surface polishing of difficult-to-cut materials, polishing on the inner surface and curved surface.
  · Tool used: straight grinder.

  à partir de∗ ：	42.88 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat biseauté" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the polishing cloth is implanted in a way that covers the base, it is possible to simultaneously polish the bottom and the side. It has improved versatility and efficiency in grinding while maintaining the characteristics of the flap wheel with shaft.
  · No clogging, allowing a uniform finish to be achieved throughout.
  · Autogenous action enables continuous grinding with new abrasive surfaces.
  · The polished material is not burnt or distorted due to the air cooling effect.
  [Applications]
  · For polishing bottom surfaces, corners, flat surfaces, and curved surfaces.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	35.48 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "GP Top Mini" (type fileté M7 X P0.75)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing. Grinding burn, a shortcoming of elastic grindstones, is prevented, and it has high grindability and life 5 to 6 times as long as conventional products. In addition, it has cushioning characteristics compared to a grinding wheel, and contacts the ground material more softly.
  [Applications]
  · Optimal for removing spot-welding burrs on automobiles, home appliances, etc., and especially polishing molds.
  · For use with ordinary metal.
  · Tool used: air grinder.

  à partir de∗ ：	16.89 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Buffle souple sur arbre" (diamètre de l'arbre 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals.
  · As it is finely slit into the polishing cloth, it is ideal for polishing irregular surfaces as well as fine parts.
  · The autogenous property prevents clogging.
  · Can be used to polish with a soft touch.
  · It has improved versatility in grinding while maintaining the characteristics of the flap with shaft.
  [Applications]
  · For polishing uneven surfaces, wood and plastic surfaces, and for light deburring work.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	35.33 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Roue avec arbre en nylon" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · It can be used with both stainless steel and general metals.
  · The nylon fiber acts as a cushion to avoid shaving too much off the polished material.
  · Abrasive material is adhered to nylon fiber non-woven fabric using a special resin adhesive which provides excellent resistance to chemicals and water, and features superior elasticity.
  · Autogenous action constantly generates a new surface so it is difficult to clog and delivers consistent surface roughness of the finished surface from initial grinding through to final.
  · Maintains its shape for a long time. Edges also do not chip in a disorderly manner.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	37.49 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue en nylon mélangé" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Mixed type of nylon and paper (A abrasive grains).
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to paper abrasive cloths, the fibers embedded in the nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece.
  · A new surface will always appear thanks to its autogenous properties, which prevent clogging and maintain a constant surface roughness of the finishing surface from the beginning until the end of polishing.
  · Compact, lightweight tool especially for scratch and hairline removal.
  [Applications]
  · Optimal for hairline work on stainless steel and aluminum.
  · For removal of scratches, burrs and beads on metallic products.
  · For polishing the wooden surface of wooden products or coating polishing.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	34.03 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  "Mini rabat en nylon" (type dur / diamètre de l'arbre : 3mm)【10 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Hard type for both stainless steel and general metals.
  · Wears less and grinds well thanks to its nylon non-woven fabric which has been compressed and hardened appropriately.
  · Works quietly, does not produce odor like rubber grindstones, generates less dust, and will not break.
  [Applications]
  · Finishing and polishing of stainless steel, aluminum and other nonferrous machining finishes.
  · Hairline work.
  · Finish polishing of molds.
  · Tools used: micro grinder, electric drill.

  à partir de∗ ：	33.45 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...