Tournevis

?* À propos du délai de livraison

• • Recommandation

  

  Dispositif d'aimantation

  SMATO

  à partir de∗ ：	18.27 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Petit tournevis BBD-M50

  MAEDAKINNZOKU

  Baby screwdriver with round shaft.
  [Features]
  Convenient for adjustment of metering and precision equipment, etc.
  [Applications]
  · For assembly and maintenance of electronic devices and precision equipment.
  · Assembly and maintenance work of automobiles, motorcycles and bicycles.

  à partir de∗ ：	2.82 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis d'essai aux étincelles (type crayon)

  TRUSCO NAKAYAMA

  [Features]
  · Built-in neon tube allows users to check conductivity.
  · A pencil type convenient to carry around.

  à partir de∗ ：	4.29 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tournevis attrape-vis

  ENGINEER

  à partir de∗ ：	3.25 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis hexagonal, pointe sphérique

  SUNFLAG

  [Features]
  · Can be used for hex socket screws such as cap screws and set screws.
  · Even when the tip part wears off, the use of a hex shaft allows cutting the tip for long-term use as a hex wrench.
  · The thread hole can be caught easily and turned from an angle.

  • Remise sur volume

  à partir de∗ ：	4.05 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tournevis à pointe sphérique

  TRUSCO NAKAYAMA

  [Features]
  · Tightening is possible even at a 25°tilt thanks to the ballpoint shape.

  à partir de∗ ：	4.04 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tournevis à impact D-963

  HOZAN

  Impact screwdriver that can be switched between left and right rotation.
  [Features]
  · Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
  · It uses a flanged protective grip that protects the hand.
  · Removing the bit holder allows a 12.7 mm square socket to be attached.
  · Case included.
  [Applications]
  · Ideal for turning screws, etc. that take effort to loosen.

  • Remise sur volume

  à partir de∗ ：	70.11 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tête plate D-630 – D-655

  HOZAN

  A fine shaft type, RoHS-compatible, flathead screwdriver with a pen clip for insertion into pockets.
  [Features]
  · Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
  · Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
  · Even when thin, "torsional strength" abides by JIS standards.
  · The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
  · The polypropylene grip with pen clip has both strength and lightness.
  · It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
  [Applications]
  · Convenient for tightening and loosening screws.

  • Remise sur volume

  à partir de∗ ：	3.75 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis à tête sphérique, longueur totale 124-233 mm

  ENGINEER

  à partir de∗ ：	5.35 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de précision à tête plate

  ENGINEER

  à partir de∗ ：	2.95 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis pour vis spéciales et pour vis « line head » (vis LH)

  ENGINEER

  à partir de∗ ：	14.19 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de précision « Superfit » à pointe sphérique

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.
  · A precision screwdriver with a long shaft.

  à partir de∗ ：	4.70 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tournevis avec grip Super Action

  ANEX

  à partir de∗ ：	40.58 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Arbre flexible

  ANEX

  [Features]
  · Ideal for fastening screws on corners and edges.

  à partir de∗ ：	7.02 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Petit cliquet inversé

  SUEKAGE TOOL

  à partir de∗ ：	26.52 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tournevis coudé à tête plate

  PB SWISS TOOLS

  [Features]
  · Effective for work in a limited space where a normal screwdriver cannot be used.
  · The angle of each end is different (in the rotating direction), and it is possible to rotate bit by bit.

  à partir de∗ ：	16.79 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Jeu de tournevis à lame traversante, poignée SwissGrip (6 pièces)

  PB SWISS TOOLS

  Screwdriver set made from 2 new materials: polypropylene and santoprene.
  [Features]
  · The symbol and size of the driver tip shape are shown on the rear of the handle. The screwdriver can be selected immediately.
  · The handle shape features the same ergonomic design as the Multi-craft.
  · The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm. It does not easily slip even when gripping with a wet hand.
  · Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
  · The tip shape and size are engraved on the metal plate (grip end) of the striking part.
  [Applications]
  · Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.
  · In addition to the striking part, a hexagonal part is provided at the root of the blade, ideal for loosening stuck screws.

  à partir de∗ ：	146.50 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis pour noyau de ferrite D-16-2B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
  [Features]
  · Material adopts polyacetal excellent in high insulation and wear resistance.
  · It does not damage the core or cause misalignment.
  · Tip size: 1.9 x 0.9, 1.95 / 2.0 / 2.6 / 2.65.

  • Remise sur volume

  à partir de∗ ：	2.42 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tournevis pour soupape D-13

  HOZAN

  A dedicated screwdriver convenient for attaching/detaching valve cores of American type valves (for tire tubes).
  [Features]
  · The handle is hexagonal which makes it easy to turn fast.
  · Handle diameter 10.0 mm φ.
  · Weight: 20 g.
  [Applications]
  · Attachment and removal of the valve core of American type valves (for tire tubes).

  • Remise sur volume

  à partir de∗ ：	4.40 €
  Délai de livraison minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tournevis Phillips, embout n° 00–2

  HOZAN

  A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
  [Features]
  · Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.
  · Shaft is thin but still complies with JIS "torsional strength" standards.
  · The basic hardening treatment for shaft strength is skilled full quenching.
  · The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.
  · Thin and tough electroless nickel plating is used to maintain accuracy.
  [Applications]
  · Ideal for screws in deep places as often seen with home appliances.

  à partir de∗ ：	3.67 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tronqué SUS SSSD-M2

  MAEDAKINNZOKU

  An all-stainless steel stubby flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
  · Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  à partir de∗ ：	27.73 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tronqué SUS SSSD-P2

  MAEDAKINNZOKU

  An all-stainless steel stubby Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
  · Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.

  à partir de∗ ：	27.73 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis SUS SMD-100

  MAEDAKINNZOKU

  An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
  · Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  à partir de∗ ：	35.50 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis SUS SMD-150

  MAEDAKINNZOKU

  Lightweight, all-stainless flathead screwdriver with excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Food-related equipment, medical equipment, cleanrooms, precision machinery, and ships.
  · For marine sports, marine development, plants, waterproof construction and water supply construction.
  · Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.

  à partir de∗ ：	42.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Visseuse électrique (traversante) PMD-075

  MAEDAKINNZOKU

  A fully equipped screwdriver that emphasizes usability. The soft grip fits in the hand and transmits all its power to the tip. Parallel-shape tip so it is unlikely to damage screw slots. The tip has a high-strength magnet.

  à partir de∗ ：	8.14 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de perçage KPD-001

  MAEDAKINNZOKU

  Square shaft through screwdriver.
  [Features]
  · Plastic grip.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  à partir de∗ ：	5.29 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de perçage KPD-003

  MAEDAKINNZOKU

  A piercing square-shafted driver with a plastic grip.
  [Features]
  · Phillips shaft length: 150 mm, total length: 260 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  à partir de∗ ：	9.03 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis à longue lame (traversante) KLD-M3

  MAEDAKINNZOKU

  With a flathead tip of 1.0 x 9.0 and total length of 380 mm, it is ideal for work at places where standard long shaft screwdrivers cannot reach.
  [Features]
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  · Through-hole type.
  · Total length: 380 mm.
  · 275 mm shaft length.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  à partir de∗ ：	13.46 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis à longue lame (traversante) KLD-P

  MAEDAKINNZOKU

  Ideal for work at places where standard long shaft screwdrivers cannot reach.
  [Features]
  · Cross-recessed end +No.2, total length 380 mm.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · A through type with magnetic tip with axial length of 275 mm.
  [Applications]
  · Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  à partir de∗ ：	13.46 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Alésoir conique K-441/K-442/K-443/K-444

  HOZAN

  A taper reamer that boasts outstanding sharpness and durability.
  [Features]
  · K-441, K-442, K-443 and K-444 are available.
  · Can be used in various applications according to the hole diameters and taper angles.
  · Perfect for work that requires application of torque as it comes with a handle.
  · Allows cutting by rotating clockwise.
  · Excellent sharpness and outstanding durability.
  [Applications]
  · Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.

  • Remise sur volume

  à partir de∗ ：	9.40 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de réglage en céramique D-271/D-272/D-275

  HOZAN

  A long screwdriver that's convenient for adjustment inside equipment.
  [Features]
  · Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
  · Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
  [Applications]
  · The 110 mm long shaft makes it ideal for adjusting parts in deep places.

  • Remise sur volume

  à partir de∗ ：	16.39 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tronqué interchangeable D-59

  HOZAN

  Stubby screwdriver with interchangeable shaft.
  [Features]
  · The tip is a combination of Phillips and flathead shapes.
  [Applications]
  · The screwdriver cannot be used for purposes other than turning screws.
  · Cannot be used on live electrical equipment.

  à partir de∗ ：	6.08 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis réglable, céramique interchangeable D-281

  HOZAN

  A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
  [Features]
  · Uses zirconia ceramic that does not cause coil misalignment.
  · Has greater durability against wear and damage than alumina ceramics.
  * Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
  · Combination contents: D-281, Phillips No.0 (D-284), cross-shaped, blade width 1.7 mm (D-285).

  • Remise sur volume

  à partir de∗ ：	27.62 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis SUS SPD-001

  MAEDAKINNZOKU

  An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, etc.
  · For waterproofing work, plumbing and cleaning equipment, etc.
  · Optimal for locations that use stainless steel bolts and nuts.

  à partir de∗ ：	32.18 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis SUS SPD-003

  MAEDAKINNZOKU

  An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · This stainless steel tool is made of martensitic material that emphasizes strength, is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
  [Applications]
  · Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
  · Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.

  à partir de∗ ：	42.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Jeu de tournevis SUS SD8

  MAEDAKINNZOKU

  An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
  [Features]
  · The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
  · Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
  · Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  à partir de∗ ：	182.78 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tronqué SD-M

  MAEDAKINNZOKU

  Flathead stubby screwdriver with an overall length of 70 mm.
  [Features]
  · The total length is short, making it ideal for working in narrow places.
  [Applications]
  · Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  à partir de∗ ：	4.61 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis de force tronqué PSD-M2

  MAEDAKINNZOKU

  Has Magnetic Tip
  
  [Features]
  · The cross-recessed end is an original shape which fits perfectly and prevents hitting the bottom.

  à partir de∗ ：	5.81 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Petit tournevis BBD-M75

  MAEDAKINNZOKU

  Baby screwdriver with round shaft.
  [Features]
  · Convenient for adjustment of metering and precision equipment, etc.
  [Applications]
  · Ideal for assembly and maintenance of electronic devices and precision equipment.
  · Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.

  à partir de∗ ：	2.69 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Petit tournevis BBD-P00

  MAEDAKINNZOKU

  Baby screwdriver with round shaft.
  [Features]
  · Convenient for adjustment of metering and precision equipment, etc.
  [Applications]
  · Ideal for assembly and maintenance of electronic devices and precision equipment.
  · Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.

  à partir de∗ ：	3.00 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Jeu de tournevis à lame traversante KD6

  MAEDAKINNZOKU

  Square shaft through screwdriver.
  [Features]
  · 6-piece set. Plastic grip.
  · Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
  · The tip has a high-strength magnet.
  [Applications]
  · Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.

  à partir de∗ ：	34.81 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis tronqué très petite taille SSD-M2

  MAEDAKINNZOKU

  Ultra mini flathead stubby screwdriver with an overall length of 70 mm.
  [Features]
  · The total length is short, making it ideal for working in narrow places.
  [Applications]
  · Ideal for automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  à partir de∗ ：	4.42 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Broche étau K-501

  HOZAN

  Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.
  [Features]
  · Features a rotary head with embedded ball bearings, which offers great workability.
  · Vise for small diameter drills with rotating cap.
  · It can be smoothly rotated while pushing in the vertical direction.
  · With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.
  · It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.
  · The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.
  [Applications]
  · It can also be used for etching by grasping a needle (probe), etc.

  à partir de∗ ：	19.11 €
  Délai de livraison minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tournevis pour noyau de ferrite D-16-4B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
  [Features]
  · Material adopts polyacetal excellent in high insulation and wear resistance.
  · It does not damage the core or cause misalignment.
  · Tip size: 2.3 X 0.4, 3.6 X 0.4 (with guide).

  • Remise sur volume

  à partir de∗ ：	3.57 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Tournevis pour noyau de ferrite D-16-5

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
  [Features]
  · Material adopts polyacetal excellent in high insulation and wear resistance.
  · It does not damage the core or cause misalignment.
  · Tip size φ5.5 (I.D. 5.5 mm), φ8.0 (O.D. 8.0 mm).

  • Remise sur volume

  à partir de∗ ：	2.09 €
  Délai de livraison minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...