ASAHI SEIKO Paliers lisses（Matériau du corps de l'unité：Fonte）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Unité de bloc chapeau, modèle à trou cylindrique avec vis de serrage, modèle UCP
ASAHI SEIKO
Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.- Remise sur volume
- Stock
à partir de∗ ： 13.86 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Palier lisse à semelle, type à alésage cylindrique avec vis de serrage, type UCPA
ASAHI SEIKO
A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.à partir de∗ ： 22.97 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Palier lisse à semelle, type à alésage cylindrique avec vis de serrage, type UCPH
ASAHI SEIKO
Pillow-type unit UCP200-type bearing box with raised center height.à partir de∗ ： 23.54 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Spécifications |
| Unité, type |
| Unité de roulement, type |
| Diam. de l'alésage de l'arbre d(Ø) |
| Matériau du corps de l'unité |
| Forme diam. intérieur du roulement |
| Type en forme de chapeau, catégorie |
| Matériau de l'élément de roulement |
| Traitement de surface |
|
|
| |
| Marque | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO |
| Série du produit | Unité de bloc chapeau, modèle à trou cylindrique avec vis de serrage, modèle UCP | Palier lisse à semelle, type à alésage cylindrique avec vis de serrage, type UCPA | Palier lisse à semelle, type à alésage cylindrique avec vis de serrage, type UCPH |
| à partir de∗ | 13.86 € *Prix unitaire/configuration de base Remise sur volume | 22.97 € *Prix unitaire/configuration de base | 23.54 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | Jour même | 5 jours | Jour même |
| Spécifications |
| ||
| Unité, type | Unité de roulement | Unité de roulement | Unité de roulement |
| Unité de roulement, type | Type palier lisse | Type palier lisse | Type palier lisse |
| Diam. de l'alésage de l'arbre d(Ø) | 12 ～ 140 | 12 ～ 50 | 12 ～ 50 |
| Matériau du corps de l'unité | Fonte | Fonte | Fonte |
| Forme diam. intérieur du roulement | Trou cylindrique, vis de serrage | Trou cylindrique, vis de serrage | Trou cylindrique, vis de serrage |
| Type en forme de chapeau, catégorie | Standard | Standard | Centre haut |
| Matériau de l'élément de roulement | Acier inoxydable | Acier inoxydable | Acier inoxydable |
| Traitement de surface | Non fourni | Non fourni | Non fourni |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Unité, type
-
Unité de roulement -
Palier à semelle complet
-
-
Unité de roulement, type
-
Type palier lisse -
Type à embase carrée -
Type à embase en losange
-
-
Diam. de l'alésage de l'arbre d(Ø)
- 8
- 10
- 12
- 12.7
- 15
- 15.875
- 17
- 19.05
- 19.05 - 30
- 20
- 22.225
- 22.225 - 35
- 23.812
- 23.813
- 25
- 25.4
- 28.575
- 28.575 - 40
- 30
- 30.162
- 30.163
- 31.75
- 31.75 - 50
- 33.34
- 34.925
- 34.93
- 35
- 36.512
- 36.513
- 36.513 - 45
- 36.513 - 55
- 38.1
- 40
- 41.275
- 41.275 - 60
- 42.862
- 44.45
- 45
- 47.625 - 65
- 50
- 50.8
- 53.975 - 75
- 55
- 55.562
- 55.563
- 55.563 - 80
- 57.15
- 60
- 61.913
- 61.913 - 90
- 63.5
- 65
- 68.262
- 68.263
- 70
- 74.613
- 74.613 - 85
- 74.613 - 100
- 75
- 79.375 - 90
- 80
- 82.55
- 85
- 87.313
- 87.313 - 120
- 90
- 95
- 100
- 105
- 110
- 114.3
- 115
- 120
- 125
- 130
- 131.763
- 138.113
- 140
-
Matériau du corps de l'unité
- Fonte
- Acier inoxydable
- Plaque en acier
- Acier profilé
- Résine
- Autres
- Acier
-
Forme diam. intérieur du roulement
-
Trou cylindrique
-
Trou cylindrique, vis de serrage
-
Trou cylindrique, collier excentrique
-
Trou conique
-
Trou conique, adaptateur
-
Trou cylindrique
-
Type en forme de chapeau, catégorie
-
Standard
-
Épais
-
Centre haut
-
Largeur étroite
-
Léger
-
Standard
-
Matériau de l'élément de roulement
-
Traitement de surface
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (7)
- SKF (29)
- INA (16)
- NIPPON PILLOW BLOCK (9)
- NTN (7)
- ZEN (4)
- ASAHI SEIKO (3)
- FSBEARING (3)
- FAG BEARINGS (1)
- TOHO (1)
- TIMKEN (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Paliers lisses »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.