GANTER Goupilles de verrouillage à billes, goupilles d'insertion
Affiner la recherche en précisant Type
-
Type à bouton -
Type à goupille -
Type de levier
?* À propos du délai d'expédition et des prix
-
Ball lock pins, Stainless Steel 1.4542
GANTER
Stainless Steel-Ball lock pins GN 113.6 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.
Ball lock pins GN 113.6 have an extreme load capacity, the pin is made of heavy duty, hardened and highly abrasion-resistant stainless steel.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 33.30 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Goupilles de verrouillage à billes en acier inoxydable, avec bouton en acier inoxydable, matériau de plongeur n° AISI 3038 (GN113.9)
GANTER
Les goupilles de verrouillage à billes en acier inoxydable GN 113.9 sont utilisées pour fixer, raccorder et verrouiller rapidement de nombreux éléments et pièces. Elles sont couramment utilisées pour les applications où les goupilles de positionnement doivent être régulièrement retirées et replacées.
Presser le bouton-poussoir à ressort permet de déverrouiller les deux billes ; le relâcher permet de les verrouiller à nouveau.- Remise sur volume
à partir de∗ ： 35.68 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 26.38 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Locking pins, Slide plastic
GANTER
Stainless Steel-Locking pins with axial lock GN 214.3 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The version with swivelling lifting ring is ideal for the use in confined spaces.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 16.92 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Ball lock pins with T-Handle, Stainless Steel 1.4542
GANTER
Stainless Steel-Ball lock pins GN 113.8 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.
Ball lock pins GN 113.8 have an extreme load capacity, the pin is made of heavy duty, hardened and highly abrasion-resistant stainless steel.
The load values given in the above table at shar stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out of any liability. They consstitute no general warranty of quality and condition. The user must determine from case to case whether a product ist suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 31.56 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 26.06 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Ball lock pins, Stainless Steel 1.4305
GANTER
Stainless Steel-Ball lock pins GN 113.5 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 26.72 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking pins with axial lock, Stainless Steel 1.4305
GANTER
Stainless Steel-Locking pins with axial lock GN 114.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and replaced again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 28.64 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking pins with axial lock, Steel
GANTER
Locking pins with axial lock GN 114.2 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 11.80 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Ball lock pins with clamping length compensation
GANTER
Stainless Steel-Ball lock pins GN 113.1 are used for rapid clamping and, at the same time, play-free clamping of thin components in particular where frequent clamping and releasing is required. A typical application is the alignment and clamping of sheet metal during a welding process.
By depressing the spring-loaded push button the pin advances by the length l2 and at the same time frees the two balls.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 54.28 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Ball lock pins with T-Handle, Stainless Steel 1.4305
GANTER
Stainless Steel-Ball lock pins GN 113.7 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.
The load values given in the above table at shar stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out of any liability. They consstitute no general warranty of quality and condition. The user must determine from case to case whether a product ist suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 25.08 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Ball lock pins, Stainless Steel 1.4305
GANTER
Stainless Steel-Ball lock pins GN 113.3 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it the balls are locked again.
Ball lock pins GN 113.3 are renowned for their compactness. The eye ring is enclosed unmounted.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 24.32 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Ball lock pins, Stainless Steel 1.4542
GANTER
Stainless Steel-Ball lock pins GN GN 113.4 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.
By pressing the spring loaded push button both balls are unlocked and by releasing it the balls are locked again.
Ball lock pins GN 113.4 are renowned for their compactness. The eye ring is enclosed unmounted.
Ball lock pins GN 113.4 have an extreme load capacity, the pin is made of heavy duty, hardened and highly abrasion-resistant stainless steel.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 30.50 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers
GANTER
Indexing plungers GN 414.1 with click-type safety lock are used when the plunger pin is to be briefly prevented from protruding. When the pin is retracted to its end position, the button engages with a clearly audible click.
The safety lock can be unlocked only by exerting axial pressure on the red safety pushbutton, with the plunger pin then returning to its starting position by spring force.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 19.38 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers with safety lock, unlocking with push-button
GANTER
Indexing plungers GN 414 with safety lock are used when the inadvertent retraction of the plunger pin is to be prevented. The protruding plunger is first locked and may be unlocked for pulling only by exerting axial pressure on the red safety push-button.
The safety lock engages in the front end position, i.e. automatically if the indexing pin protrudes, with the locking mechanism housed fully in the operating button and protected from malfunctions. The specified axial load bearing capacity refers to the locking force of the bolt against inadvertent operation which must not be exceeded.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 16.26 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel
GANTER
Owing to its shape, the lifting ring of the indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C / Type CK).
Indexing plungers with rest position are used when the indexing pin is temporarily not allowed to protrude. After the pin is pulled in, turn the pull ring by 90°. The ring is held in position by an indexing notch.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 11.56 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking pins
GANTER
Locking pins with axial lock GN 214.2 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and replaced again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The version with swivelling lifting ring is ideal for the use in confined spaces.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.50 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking pins with axial lock, Stainless Steel AISI 303
GANTER
Stainless Steel-Pins with axial lock GN 114.3 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers
GANTER
Owing to its shape, the lifting ring of the Stainless Steel-Indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C / Type CK).
Indexing plungers with rest position are used when the indexing pin is temporarily not allowed to protrude. After the pin is pulled in, turn the pull ring by 90°. The ring is held in position by an indexing notch.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 12.70 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers with safety lock, unlocking with push-button
GANTER
Stainless Steel-Indexing plungers GN 414 with safety lock are used when the inadvertent retraction of the plunger pin is to be prevented. The protruding plunger is first locked and may be unlocked for pulling only by exerting axial pressure on the red safety push-button.
The safety lock engages in the front end position, i.e. automatically if the indexing pin protrudes, with the locking mechanism housed fully in the operating button and protected from malfunctions. The specified axial load bearing capacity refers to the locking force of the bolt against inadvertent operation which must not be exceeded.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 22.06 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers, with click-type safety lock, unlocking with p
GANTER
Stainless Steel-Indexing plungers GN 414.1 with click-type safety lock are used when the plunger pin is to be briefly prevented from protruding. When the pin is retracted to its end position, the button engages with a clearly audible click.
The safety lock can be unlocked only by exerting axial pressure on the red safety pushbutton, with the plunger pin then returning to its starting position by spring force.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 25.82 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Locking pins with axial lock (Ball retainer)
GANTER
GN 124.2 Stainless Steel-Locking pins are used for quick fixing, connecting and locking of various jig and fixture systems.
The locking balls are held in position by a pressure spring and are therefore not rigidly locked. The bolts can be quickly and easily inserted and removed from the locating hole.
The rated shear stresses of the bolt cross-section are theoretical guide values only and do not constitute any warranty. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
This standard replaces the previous Stainless Steel-Locking pins GN 124.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Locking pins with axial lock (magnetic)
GANTER
GN 124.1 Stainless Steel-Locking pins are used for quickly fixing, connecting and locking various parts and workpieces made of magnetic materials.
A neodymium magnet is recessed into the underside of the bolt and axially retains the bolt in its inserted procession. High-quality surfaces with perpendicular locating holes promote magnetic flux to produce excellent axial retention.
The rated shear stresses of the bolt cross-section are theoretical guide values only and do not constitute any warranty. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.80 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Locking pins, Stainless Steel-Slide
GANTER
Stainless Steel-Locking pins with axial lock GN 214.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.
The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The version with swivelling lifting ring is ideal for the use in confined spaces.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 20.84 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Goupilles de verrouillage à billes en acier inoxydable, avec bouton en acier inoxydable, matériau de plongeur n° AISI 630 (GN 113.10)
GANTER
Les goupilles de verrouillage à billes en acier inoxydable GN 113.10 sont utilisées pour fixer, raccorder et verrouiller rapidement de nombreux éléments et pièces. Elles sont couramment utilisées pour les applications où les goupilles de positionnement doivent être régulièrement retirées et replacées.
Presser le bouton-poussoir à ressort permet de déverrouiller les deux billes ; le relâcher permet de les verrouiller à nouveau.
Les goupilles de verrouillage à billes GN 113.10 ont une capacité de charge extrême. La goupille est fabriquée en acier inoxydable robuste, trempé et hautement résistant à l'abrasion.- Remise sur volume
à partir de∗ ： 44.86 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Broches de verrouillage à billes, poignée en L, verrouillable, AISI | Indexing plungers with safety lock, unlocking with push-button | Stainless Steel-Indexing plungers with safety lock, unlocking with push-button | Stainless Steel-Indexing plungers, with click-type safety lock, unlocking with p | Stainless Steel-Locking pins with axial lock (Ball retainer) | ||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| à partir de∗ | 33.30 € *Prix unitaire/configuration de base Remise sur volume | 35.68 € *Prix unitaire/configuration de base Remise sur volume | 26.38 € *Prix unitaire/configuration de base Remise sur volume | 16.92 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 31.56 € *Prix unitaire/configuration de base Remise sur volume | 26.06 € *Prix unitaire/configuration de base Remise sur volume | 26.72 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 28.64 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 11.80 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 54.28 € *Prix unitaire/configuration de base Remise sur volume | 25.08 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 24.32 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 30.50 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 19.38 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 16.26 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 11.56 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 13.50 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 13.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 12.70 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 22.06 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 25.82 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 8.80 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 20.84 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 44.86 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume |
| Délai d'expédition minimum ： | 7 jours | 7 jours | 7 jours | Jour même | 7 jours | 7 jours | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
Affiner la recherche en spécifiant le fabricant
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Affiner la recherche en précisant le délai
-
- Tous les articles
- Jour même
- 1 jour ou moins
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
- 5 jours ou moins
- 7 jours ou moins
- 9 jours ou moins
- 15 jours ou moins
- 42 jours ou moins
Catégories relatives à « Goupilles de verrouillage à billes, goupilles d'insertion »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.