GANTER Type à bouton

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Stainless Steel-Hygienic latches

  GANTER

  Stainless Steel-Hygienic latches meet the requirements for a hygienic design according to DIN 1672-2 and DIN 14159.
  The choice of 9 differently shaped catch plates gives a range A of 6 to 50 mm.
  The lockings are included loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	35.38 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hook-type locks, lockable

  GANTER

  Hook-type latches GN 115.8 with hook and latch bracket are mainly used for sliding doors and flaps. The locking action is in radial direction to the axis of rotation, resulting in a wide variety of different uses.
  Two keys are supplied with the unit. The key can be removed in both end positions.
  Hook-type latches GN 115.8 are supplied with the hook enclosed loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.74 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Hook-type locks, operation with key

  GANTER

  Hook-type latches GN 115.8 with hook and latch bracket are mainly used for sliding doors and flaps. The locking action is in radial direction to the axis of rotation, resulting in a wide variety of different uses.
  Hook-type latches GN 115.8 are supplied with the hook enclosed loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	8.78 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stop locks with 4 indexing positions, Zinc die casting

  GANTER

  Stop locks GN 702 are particularly suitable for light-weight applications not exposed to dynamic loads, e.g. for keeping drawers closed.
  To mount stop locks of Type C, bore holes as shown in the diagram below must be set in the attachment surface.
  These mounting holes are usually made by punching or with laser.
  The sheet metal punch GN 123 is recommended for small series and sheet metal with a thickness of below 2 mm.
  The mounting bore holes can also be made by drilling / milling.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.64 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches, with key, locating ring chrome plated

  GANTER

  Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the latch ease the closing of the door.
  Latches with 22 different cranks cover a latch distance A from 4 to 50 mm.
  Latches GN 115 are supplied with loosely enclosed locking.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Latches

  GANTER

  Stainless Steel-Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the locking ease the closing of the door.
  Latches with different cranks cover a range A from 6 to 50 mm.
  The operating bolt is fitted with an O-ring for sealing.
  Stainless Steel-Latches GN 115 are supplied with loosely enclosed locking.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	27.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Hook-type locks, operation with various elements

  GANTER

  Hook-type latches GN 115.8 with hook and latch bracket are mainly used for sliding doors and flaps. The locking action is in radial direction to the axis of rotation, resulting in a wide variety of different uses.
  Hook-type latches GN 115.8 are supplied with the hook enclosed loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Latches

  GANTER

  Latches GN 117 are vibration proof and they have a large pulling-in range of up to 10 mm. Locking is achieved by turning the knob clockwise.
  Attention is drawn to its simple and hence cost saving installation.
  Type GB (with threaded bolt) has been introduced to accept other types of handles besides the star knob.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.72 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches

  GANTER

  Latches GN 119 have a pulling-in range of 10 mm. Locking is achieved by turning the door lock clockwise.
  
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	14.56 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches with safety function, with key, not lockable

  GANTER

  Latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the lock. The device can be turned 90° only when the operating element is pressed down, which releases the safety pin from the locked position. This feature protects the lock reliably from moving on its own or as the result of vibrations.
  The beveled edges on the lock make closing the door easy. The 15 different offsets allow the latch distance A to be set between 4 and 32 mm.
  Latches GN 115.9 are delivered with the lock enclosed separately
  

  • Remise sur volume

  à partir de∗ ：	12.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches with safety function, with operating elements, not lockable

  GANTER

  Latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the lock. The device can be turned 90° only when the operating element is pressed down, which releases the safety pin from the locked position. This feature protects the lock reliably from moving on its own or as the result of vibrations.
  The beveled edges on the lock make closing the door easy. The 15 different offsets allow the latch distance A to be set between 4 and 32 mm.
  Latches GN 115.9 are delivered with the lock enclosed separately.

  • Remise sur volume

  à partir de∗ ：	17.02 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches, operation with key, locating ring black

  GANTER

  Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the latch ease the closing of the door.
  Latches with 22 different cranks cover a latch distance A from 4 to 50 mm.
  Latches GN 115 are supplied with loosely enclosed locking.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Latches, Stainless Steel

  GANTER

  Stainless Steel-Latches GN 119 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.
  The operating spindle is provided with an o-ring.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	45.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Rotary clamping latches, Latch distance adjustable

  GANTER

  The rotary clamping latches GN 516.1 have a closing mechanism which transfers the rotary movement of the operating element (key) into a 90° turn and then into a 6 mm linear stroke.
  This mechanism is designed for common applications such as making a tight and vibration-proof interlock in the end position (retaining position) in connection with the protective cap.
  A 10 mm adjustment within the latch distances A1 ... A4 can be achieved by the set screw M6. This covers a clamping range from 1 to 41 mm consistently.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.28 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Rotary clamping latches, Stainless Steel

  GANTER

  The Stainless Steel-Rotary clamping latches GN 516.5 have a closing mechanism which transfers the rotary movement of the operating element / key into a 90° turn and then into a 6 mm linear stroke.
  This mechanism is designed for common applications such as making a tight and vibration-proof interlock in the end position (retaining position) in connection with an elastic element (door / casing seal).
  9 latches with different cranks will cover latch distances (retaining zones) of between 19 and 41 mm. If the measured retaining position lies between two latch distances A, the next smaller value must be selected.
  The rotary clamping latches GN 516.5 are supplied with the latch enclosed loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	97.88 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Rotary clamping latches, Zinc die casting

  GANTER

  The outstanding feature of the rotary clamping latches GN 116.1 is their wide clamping range of 12 mm, with the 5 keys A1 to A5 covering a clamping range of 4 to 46 mm with broad overlap. This configuration allows large closing strokes within the individual key spacings, e.g. in connection with seals.
  With the permissible tightening torque of 2 Nm for the clamping screw, the key generates a closing force of approx. 300 Nm at the key.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.22 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Rotary clamping latches, Zinc die casting / Steel

  GANTER

  The rotary clamping latches GN 516 have a closing mechanism which transfers the rotary movement of the operating element (key) into a 90° turn and then into a 6 mm linear stroke.
  This mechanism is designed for common applications such as making a tight and vibration-proof interlock in the end position (retaining position) in connection with an elastic element (door / casing seal).
  22 latches with different cranks will cover latch distances (retaining zones) of between 17 and 63 mm. If the measured retaining position lies between two latch distances A, the next smaller value must be selected.
  The rotary clamping latches GN 516 are supplied with the latch enclosed loose.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.66 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Latches, lockable

  GANTER

  The lockable Stainless Steel-Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the locking ease the closing of the door.
  Latches with different cranks cover a range A from 6 to 50 mm.
  Two keys are supplied. The key may be pulled off in both end positions.
  Stainless Steel-Latches GN 115 are supplied with loosely enclosed locking.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	84.82 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Latches, Operation with operating elements

  GANTER

  Stainless Steel-Latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the locking ease the closing of the door.
  Latches with different cranks cover a range A from 6 to 50 mm.
  The operating bolt is fitted with an O-ring for sealing.
  Stainless Steel-Latches GN 115 are supplied with loosely enclosed locking.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	38.56 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...