GANTER Boulons à œil / vis à œil
Rechercher en précisant la catégorie inférieure
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Lifting eye bolts, Steel
GANTER
These lifting eye bolts correspond to standard sheet DIN 580.
The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Remise sur volume
à partir de∗ ： 2.48 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Lifting eye bolts, Stainless Steel A2
GANTER
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Remise sur volume
à partir de∗ ： 5.18 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Lifting eye bolts (rotating), Steel
GANTER
The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 80.44 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
Lifting eye nuts, Stainless Steel A2
GANTER
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Remise sur volume
à partir de∗ ： 5.40 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Stainless Steel-Swing bolts with long threaded bolt
GANTER
Stainless Steel-Swing bolts GN 1524 offer a longer threaded bolt contrary to DIN 444.
For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.06 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Lifting eye nuts (rotating), Steel
GANTER
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket nut cannot be removed from the ring.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 97.40 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
Swing bolts with long threaded bolt
GANTER
GN 1524 swing bolts offer a longer threaded bolt contrary to DIN 444.
For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.14 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Lifting eye nuts, Steel
GANTER
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Remise sur volume
à partir de∗ ： 2.48 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Vis nominale (M) |
| Longueur L (mm) |
| Matériau |
| Traitement de surface |
| Forme d'embout |
| Niveau de résistance (acier) |
| Type de filetage |
| Unité de vente |
| Vis nominale (pouce) |
| Application |
| Type à vis |
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | ||||||||
| CAD |
|
|
|
| ||||
| à partir de∗ | 2.48 € *Prix unitaire/configuration de base Remise sur volume | 5.18 € *Prix unitaire/configuration de base Remise sur volume | 80.44 € *Prix unitaire/configuration de base Remise sur volume | 5.40 € *Prix unitaire/configuration de base Remise sur volume | 14.06 € *Prix unitaire/configuration de base Remise sur volume | 97.40 € *Prix unitaire/configuration de base Remise sur volume | 8.14 € *Prix unitaire/configuration de base Remise sur volume | 2.48 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | Jour même | 4 jours | 7 jours | Jour même | 4 jours | Jour même | 7 jours |
| Vis nominale (M) | M 8 | M 8 | M 8 | M 8 | M 8 | M 8 | M 8 | M 8 |
| Longueur L (mm) | - | - | - | - | 50 ～ 100 | - | 50 ～ 100 | - |
| Matériau | Acier | Acier inoxydable | - | Acier inoxydable | Acier inoxydable | - | - | Acier |
| Traitement de surface | - | - | - | - | - | - | - | - |
| Forme d'embout | - | - | - | - | - | - | - | - |
| Niveau de résistance (acier) | - | - | - | - | - | - | - | - |
| Type de filetage | - | - | - | - | - | - | - | - |
| Unité de vente | - | - | - | - | - | - | - | - |
| Vis nominale (pouce) | - | - | - | - | - | - | - | - |
| Application | - | - | - | - | - | - | - | - |
| Type à vis | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Vis nominale (M)
-
Longueur L (mm)
-
Matériau
- Acier
- Acier inoxydable
-
Traitement de surface
- Non fourni
- Revêtement oxydé noir
- Placage chrome brillant
-
Forme d'embout
-
Méplat -
Extrémité arrondie
-
-
Niveau de résistance (acier)
-
Type de filetage
- Métrique normal
- Blanc normal
-
Unité de vente
- Faible quantité (disponible à partir de 1 pièce)
- Boîte, paquet
-
Vis nominale (pouce)
-
Application
-
Type à vis
- Boulon
Affiner la recherche en spécifiant le fabricant
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Boulons à œil / vis à œil »
-
- Boulons hexagonaux
- Vis d'assemblage à tête plate à six pans creux
- Goujon filetés / à filetage intégral
- Vis à oreilles / vis moletées / vis d'ornement
- Vis captives pour panneau
- Boulons d'assemblage à six pans creux / boulons d'alésoir / boulons épaulés
- Boulons à œil / vis à œil
- Boulons en U
- Accessoires / cache-vis
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.