HAKKO Pannes

?* À propos du délai d'expédition et des prix

• 

  Embouts série 900L

  HAKKO

  Replacement tips for the 900L series soldering iron. (The tip has external dimensions of ø8.5 mm)

  • Remise sur volume

  à partir de∗ ：	9.06 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embouts série T20

  HAKKO

  Replacement tips for the T20 series soldering iron. (The tip has external dimensions of ø7.2 mm)

  • Remise sur volume

  à partir de∗ ：	42.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embouts série T12

  HAKKO

  Replacement tips for the T12 series soldering iron. (The tip has external dimensions of ø5.5 mm)

  • Remise sur volume

  à partir de∗ ：	18.88 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embouts série T9【2 pièces par conditionnement】

  HAKKO

  Replacement tips for the T9 series.

  • Remise sur volume

  à partir de∗ ：	122.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embouts série T8 / SOP【2 pièces par conditionnement】

  HAKKO

  Replacement tips and SOP for the T8 series. (Has a tip thickness of 0.7 mm)

  • Remise sur volume

  à partir de∗ ：	100.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Nettoyeur embout rotatif FT-710【1-2 pièces par conditionnement】

  HAKKO

  A rotating type tip cleaner. Helps reduce tip oxidation and prevent solder spatter. FT-710.
  
  [Features]
  · A rotating type tip cleaner. Helps reduce tip oxidation and prevent solder spatter.
  · For issues such as solder spattering and tip oxidation, etc.
  · As it doesn't use any water, the tip temperature will not drop too much when cleaning, helping increase workability.
  · A low noise design.
  · An energy saving specification with a power consumption of just 5 W.
  · An airtight design that helps eliminate solder spattering when cleaning the tip, a major reason behind poor quality work.
  · Has the advantages of both cleaning sponges and cleaning wires (Hakko 599B).
  · Control how much solder is removed.
  · Two types of cleaning brush are available.
  · Use brushes for specific applications, enabling control of how much solder is removed.
  · Compatible with various Hakko soldering irons and tips.
  · The receptacle can be replaced and its height adjusted in accordance with the soldering iron and tip being used.
  · Easy to maintain.
  · Features a metallic waste solder receptacle for easy cleaning.
  · The drive part has been even further isolated, ensuring that no solder waste is able to get in.
  · Tool-less cleaning brush replacement.

  • Remise sur volume

  à partir de∗ ：	4.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...