KANEMITSU Type à embase（Type：Composants associés）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- En promotion
Accouplement d'arbre flexible à embase SNS, manchons en caoutchouc
KANEMITSU
The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.- Remise sur volume
à partir de∗ ： 1.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Accouplement d'arbre flexible à bride SNS, jeux de pièces d'accouplement
KANEMITSU
The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.à partir de∗ ： 6.60 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Boulons d'accouplement d'arbre monté, modèle à embase SNS
KANEMITSU
SS400 is used as the bolt and nut material, and SWRH62 is used as the spring washer material.à partir de∗ ： 4.95 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 75.99 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Manchon STB 11080
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·à partir de∗ ： 108.39 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Manchon STB 13070
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.à partir de∗ ： 168.96 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 28.38 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Manchon STB 4225
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.à partir de∗ ： 30.80 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 41.60 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Manchon STB 6340
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.à partir de∗ ： 60.92 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Manchon STB 11055
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.à partir de∗ ： 133.83 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Manchon STB 14090
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.à partir de∗ ： 263.19 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Plage de couple admissible(N▪m) |
| Plage maximale du nombre de tours(tr/min) |
| Diamètre extérieur A(φ) |
| Longueur totale W(mm) |
| Caractéristiques |
| Matériau du corps principal |
| Type |
| Couple admissible(N▪m) |
| Nombre de tours admissibles maximal(tr/min) |
| Plage de désalignement latéral admissible(mm) |
| Désalignement latéral admissible(mm) |
| Désalignement angulaire admissible(deg) |
| Application |
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU |
| Série du produit | Accouplement d'arbre flexible à embase SNS, manchons en caoutchouc | Accouplement d'arbre flexible à bride SNS, jeux de pièces d'accouplement | ||||||||||
| à partir de∗ | 1.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 6.60 € *Prix unitaire/configuration de base | 4.95 € *Prix unitaire/configuration de base | 75.99 € *Prix unitaire/configuration de base | 108.39 € *Prix unitaire/configuration de base | 168.96 € *Prix unitaire/configuration de base | 28.38 € *Prix unitaire/configuration de base | 30.80 € *Prix unitaire/configuration de base | 41.60 € *Prix unitaire/configuration de base | 60.92 € *Prix unitaire/configuration de base | 133.83 € *Prix unitaire/configuration de base | 263.19 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | Jour même | 5 jours | 9 jours | 9 jours | 9 jours | 9 jours | 5 jours | 5 jours | 9 jours | 9 jours | 9 jours | 8 jours |
| Plage de couple admissible(N▪m) | - | - | - | - | - | - | - | - | - | - | - | - |
| Plage maximale du nombre de tours(tr/min) | - | - | - | - | - | - | - | - | - | - | - | - |
| Diamètre extérieur A(φ) | - | - | - | - | - | - | - | - | - | - | - | - |
| Longueur totale W(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Caractéristiques | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps principal | Résine | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier | Acier |
| Type | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés | Composants associés |
| Couple admissible(N▪m) | - | - | - | - | - | - | - | - | - | - | - | - |
| Nombre de tours admissibles maximal(tr/min) | - | - | - | - | - | - | - | - | - | - | - | - |
| Plage de désalignement latéral admissible(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Désalignement latéral admissible(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Désalignement angulaire admissible(deg) | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Plage de couple admissible(N▪m)
- 3,01 à 5,00
- 5,01 à 10,00
- 10,01 à 20,00
- 20,01 à 50,00
- 50,01 à 100,00
- 100 à moins de 500
- 500 à moins de 1 000
- 1000 à moins de 5000
- 5 000 à moins de 10 000
- 10 000 à moins de 20 000
- 20 000 à moins de 50 000
-
Plage maximale du nombre de tours(tr/min)
- 301 à 1 000
- 1 001 à 2 000
- 2001 à 4 000
- 4 001 à 10 000
-
Diamètre extérieur A(φ)
-
Longueur totale W(mm)
-
Caractéristiques
- Absorption des vibrations
- Trou d'arbre brut
-
Matériau du corps principal
- Acier
- Résine
-
Type
- Corps principal
- Composants associés
-
Couple admissible(N▪m)
-
Nombre de tours admissibles maximal(tr/min)
-
Plage de désalignement latéral admissible(mm)
-
Désalignement latéral admissible(mm)
-
Désalignement angulaire admissible(deg)
-
Application
Affiner la recherche en spécifiant le fabricant
-
- KANEMITSU (12)
- KAYSEVEN (0)
- NABEYA BI-TECH (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Type à embase »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.