OMRON Connecteurs entre circuits imprimés（Fonction de protection (résistance environnementale)：N/A）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- Recommandation
Connecteur DIN (type 4 rangées, 128 contacts) - XC5 (multi-contact)
OMRON
[Features]
・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.- Remise sur volume
à partir de∗ ： 15.11 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- Recommandation
Connecteur DIN (pour courants électriques moyens et élevés) - XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Remise sur volume
à partir de∗ ： 14.18 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Connecteur DIN (type à connexion par câble) - XC6
OMRON
[Features]
・ A connector for cable connection that broadens the applications for DIN connectors.
・ There are 2 types of connector available for connecting flat cables and discrete wires, which can then be selected according to the application.
・ By using flat cable connectors (XC6D and XC6H types), VME bus configurations (daisy chain) and backplane configurations are possible.
・ The connector for discrete wire connections (XC6V type) uses pressure welded contacts and partitioned contact blocks, significantly reducing the work load associated with harnessing.- Remise sur volume
à partir de∗ ： 28.59 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur DIN (type double contact) - XC5 (norme DIN)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Remise sur volume
à partir de∗ ： 3.08 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Prise IC - XR2
OMRON
[Features]
・ Highly reliable such as being able to cope with sudden power outages etc.
・Ideal for high speed data processing circuits.
· The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
・ The opening for inserting the contact is large, so insertion is easy.
・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
· Has excellent resistance to rises in flux.
・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
▪ UL standard (File No.E103202).
・ Certified products are used as standard.- Remise sur volume
à partir de∗ ： 0.95 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur USB, XM7
OMRON
A compact interface connector that complies with USB standards
[Features]
· Mini-USB connector.
· 5000 installation/removal cycles.
· L-shaped DIP terminals and SMT terminals available.
· USB connector.
· The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.- Remise sur volume
à partir de∗ ： 1.26 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Fiche d'origine - XG8
OMRON
[Features]
・ This is a general purpose original plug that conforms to a broad range of applications.
・ It can be widely used as a plug for a variety of socket fitting.
・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
· Compatible with through hole diameter ⌀0.8.
・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
・ Separation cut is possible (except XG8WL type).
▪ UL standard (File No.E103202).
・ Certified products are used as standard (only XG8A and XG8B).- Remise sur volume
à partir de∗ ： 1.24 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3
OMRON
[Features]
・ A space saving type that saves space in the screw mounting section.
・ Handles stacking heights of 12 mm to 20 mm.
・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
・ Has a mating length of 3.1 mm, helping improve space during mounting.
・ The design of the press fit section helps maintain a stable contact force.
・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
▪ UL standard certified product (File No.E103202).
・Cannot be mated with XH2/XH4 half pitch connectors.- Remise sur volume
à partir de∗ ： 4.00 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteur de câble plat (type PCB), XG2
OMRON
[Features]
· Total cost reduction is achieved by high-density mounting and low-power wire connections.
· The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
· Can be dip-soldered directly to a PCB.
· The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
· Uses a 2.54 mm grid terminal array.
· PCB pattern design is easy.
· Two types of terminal arrays: standard and inverse.
· Uses insulating materials complying with UL standards (UL94V-0).
· Pressure-welding tool uses attachment that supports all poles.
· Saves time and work connecting wires.- Remise sur volume
à partir de∗ ： 2.40 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Connecteurs de court-circuit - XJ8 / XG8S / XG8T
OMRON
[Features]
· A low-profile, economical connector that is used for circuit switching.
· Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
· These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
· Available in a lineup of one to three rows.
· Compatible with through hole diameters of ⌀0.8.
· An easy-to-insert, difficult-to-remove structure.
· A 2-point contact structure with high contact reliability.
· The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
· UL Standard (File NO E103202).
· Certified products are used as standard (XJ8 type).- Remise sur volume
à partir de∗ ： 0.14 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Forme du connecteur |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Nombre |
| Broche / contact applicable |
| Nombre d'âmes |
| Application |
| Courant admissible(A) |
| Tension admissible(V) |
| Méthode de connexion des fils |
| Sens de connexion |
| Fonction de protection (résistance environnementale) |
| Norme représentative |
|
|
|
|
|
|
|
|
|
| |
| Marque | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Série du produit | Connecteur DIN (type 4 rangées, 128 contacts) - XC5 (multi-contact) | Connecteur DIN (pour courants électriques moyens et élevés) - XC4 | Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3 | |||||||
| à partir de∗ | 15.11 € *Prix unitaire/configuration de base Remise sur volume | 14.18 € *Prix unitaire/configuration de base Remise sur volume | 28.59 € *Prix unitaire/configuration de base Remise sur volume | 3.08 € *Prix unitaire/configuration de base Remise sur volume | 0.95 € *Prix unitaire/configuration de base Remise sur volume | 1.26 € *Prix unitaire/configuration de base Remise sur volume | 1.24 € *Prix unitaire/configuration de base Remise sur volume | 4.00 € *Prix unitaire/configuration de base Remise sur volume | 2.40 € *Prix unitaire/configuration de base Remise sur volume | 0.14 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | 6 jours | 5 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 5 jours |
| Forme du connecteur | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée |
| A· B· C | - | - | - | - | - | - | - | - | - | - |
| D· E· F | DIN / mini-DIN | DIN / mini-DIN | DIN / mini-DIN | DIN / mini-DIN | - | - | - | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | USB | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | XH | - | - |
| Nombre | - | - | - | - | - | - | - | - | - | - |
| Broche / contact applicable | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | - | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | - | Mâle (fiche) |
| Nombre d'âmes | 128 | 15 ～ 48 | 64 | 20 ～ 100 | 8 ～ 64 | 4 ～ 5 | 2 ～ 100 | 1 ～ 120 | 10 ～ 60 | 2 ～ 24 |
| Application | Pour PCB | Pour PCB / Autre | Connexion de câble | Circuit imprimé à circuit imprimé | Pour PCB | Pour PCB | Pour PCB | Circuit imprimé à circuit imprimé | Pour PCB | Pour PCB |
| Courant admissible(A) | 2 | 6 ～ 15 | 3 | 2 | 1 | 1 | 3 | 0.5 | 1 | 2 |
| Tension admissible(V) | AC300 | AC380 ～ CA500 | AC300 | AC300 | AC300 | AC30 | AC300 | CA125 | CA250 | AC300 |
| Méthode de connexion des fils | Type soudé | Type soudé | Soudage par pression | Type soudé | Type soudé | Type soudé | - | Type soudé | Soudage par pression | Type soudé |
| Sens de connexion | Droit / Angle | Droit / Angle | - | Droit / Angle | Droit | Droit / Angle | Droit / Angle | Droit / Angle | Droit | Droit |
| Fonction de protection (résistance environnementale) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Norme représentative | - | UL | - | UL / CSA | UL | - | UL | UL | UL | UL |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Forme du connecteur
- Forme carrée
-
A· B· C
- Autre
-
D· E· F
- DIN / mini-DIN
- Autre
-
G·H·I
- Autre
-
M·N·O
- Autre
-
P· Q· R
- Autre
-
S· T· U
- USB
-
V· W· X
-
Nombre
- Autre
-
Broche / contact applicable
- Mâle (fiche)
- Femelle (prise)
- Autre
-
Nombre d'âmes
-
Application
-
Courant admissible(A)
-
Tension admissible(V)
-
Méthode de connexion des fils
- Type soudé
- Serti
- Soudage par pression
- Fixation avec vis
- Autre
-
Sens de connexion
- Droit
- Angle
-
Fonction de protection (résistance environnementale)
-
Norme représentative
Affiner la recherche en spécifiant le fabricant
-
- OMRON (10)
- HONDA TSUSHIN KOGYO (2)
- FUJIKURA (DDK) (1)
- HIROSE ELECTRONIC (0)
- HARTING (0)
- MOLEX (0)
- WEIDMUELLER (0)
- ERNI (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Connecteurs entre circuits imprimés »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.