PATLITE Colonnes lumineuses（Representative Standard：CE）

?* À propos du délai d'expédition et des prix

• 

  Lampe de signal stratifiée à LED avec alarme sonore électronique

  PATLITE

  A speech synthesis type / electronic audio alarm device with a built-in high-volume horn. Features LED stack lights that are clearly visible from a distance. Features 32 built-in alarm sounds and melodies (the LKEH-FV type has no built-in audio functionality).
  
  [Features]
  The head cover uses an alloy resin with excellent oil resistance (oil mist environments also taken into consideration).
  · The body is made using AES resin giving excellent weather resistance.
  · The lighting unit is made using polycarbonate resin, which helps protect against impact/shock.
  · The surface of the lighting unit is flat, helping prevent dust from accumulating.
  · The new reflective mirror design improves visibility from both the top and bottom.
  · The optimized horn-shaped design deliver a volume of 105dB (at 1 m).
  · The volume, selection switches, and SD card slot are found on the front of the unit, enabling easy changing of settings, even post-installation.
  · Operate the selection switch to play the test sounds which can then be used to check operations and for when adjusting the volume.
  · Also complies with CE standards (24V specifications) for use internationally.
  · The volume can be reduced by approximately 20dB via the noise-reduction input. The combination of a timer and sensor allow noise reduction for use during nighttime.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · UL-compatible types are also available.
  · Boasts IP53 protective characteristics, enabling use in factories with high volumes of moisture and dust.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	350.80 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Voyant lumineux superposé à LED super fin

  PATLITE

  An ultra-slim types with an aluminum body. Ideal for small equipment, etc.
  
  [Features]
  · The modular structure makes changing and expanding of the color array easy.
  · The wiring is determined by the color of the unit. As such, there is no need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined and expanded, even after mounting to equipment.
  · The prism cut globes scatter the light with a high level of brightness, helping improve visibility.
  · The body is made from aluminum, helping protect against rust. Maintain its appearance, even after many hours of use.
  · The screws for mounting the main body are parallel screw size types for pipes/tubes, enabling direct connection with flexible wire conduits, etc.
  · A modular structure in which the wiring is determined by the color of the unit.
  · No need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined, even after mounting to equipment.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · CE marking compliant (conforms to EN / IEC standards).
  · UL standards compliant (UL508 / File no. E215660).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	87.55 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Colonnes lumineuses murales à LED de type mince

  PATLITE

  The newly-developed LED illumination type structure improves visibility from the sides. A thin type designed for full integration with equipment.
  
  [Features]
  [A thin type with a depth of just 37.5 mm that fits neatly on equipment.
  · In the pursuit of ever-thinner devices, the depth has been kept down to just 37.5 mm, helping greatly improve integration with equipment.
  · LEDs are used for the light source, rendering maintenance such as post-installation replacing of light bulbs unnecessary, while also reducing running costs.
  [The newly-developed LED illumination type structure provides high visibility from the sides]
  · In terms of setting the direction in which the LEDs illuminate, the manufacturer has developed a structure (patent pending) which can guarantee luminance from the sides, improving visibility from the side.
  [A dust-proof and jet-proof IP65 structure that can be used under harsh conditions.]
  · The IP65 (FB type is IP54) dust-proof and jet-proof structure enables use even in factories with large amounts of moisture and dust.
  [A cost effective five-color high luminance LED with low power consumption.]
  Uses ultra-high luminance LEDs for reduced power consumption compared to light bulbs, helping improve energy saving efforts. The lineup includes three to five stack types.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	183.49 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Tour à signal - Voyant lumineux à couches série LR (LR4)

  PATLITE

  Brighter, more resonant, easier to use, and even stronger. Greatly evolved multilayer signal light

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	80.75 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Grands voyants lumineux stratifiés à LED

  PATLITE

  Uses a triple reflection system for excellent visibility, even from afar. Ideal for mounting to large equipment and high out of reach locations.
  
  [Features]
  · The triple reflection system (PAT.P) improves visibility from beneath and provides sufficient brightness for those times when it is installed in high and out of reach locations such as on large machinery etc.
  · A modular structure in which the wiring is determined by the color of the unit.
  · No need to alter the wiring, even if the color array changes. The color array can be easily recombined and expanded, even after mounting to equipment.
  · The FB type features a built-in buzzer with a maximum volume of 85dB (at 1 m) that can be heard even in noisy factories, etc.
  
  · A dust-proof and jet-proof IP54 structure that can even be used in factories with large amounts of moisture and dust.
  · Compatible with open collectors. Can be driven directly using a PLC, etc. (DC24V only).
  · The 24V specification is CE marking compliant (EN / IEC compliant product EN60598-1: 1993).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	314.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Colonne lumineuse à LED ultra mince MP-A

  PATLITE

  An ultra-slim types with a lightweight resin body. Ideal for small equipment, etc.
  
  [Features]
  · The modular structure makes changing and expanding of the color array easy.
  · The wiring is determined by the color of the unit. As such, there is no need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined and expanded, even after mounting to equipment.
  · The prism structure and lens cut globes scatter the light with a high level of brightness, helping improve visibility.
  · The body is made from lightweight ABS resin. Maintains its appearance, even after man hours of use.
  · The screw parts used for mounting the main body are metric size types (M22 × 1.5).
  · A dust-proof and jet-proof IP65 structure that can even be used in factories with large amounts of moisture and dust. <
  br>· Compatible with open collectors and can be driven directly using a PLC, etc.
  · CE marking compliant (conforms to EN / IEC standards).
  · UL standards compliant (UL508 / File no. E215660).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	89.68 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Série LA6

  PATLITE

  A complete range of information that cannot be seen with "preventive maintenance", "predictive monitoring", and "process standardization".

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	261.39 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...