TOYO VALVE Vannes de régulation（Fluide applicable：Air）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- En promotion
Vanne de régulation à vis type 10K
TOYO VALVE
Stainless steel valve U Series. For general purpose and construction equipment.
[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.- Fichiers CAD 2D disponibles
à partir de∗ ： 51.73 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Vanne de régulation à bride, en fonte ductile, type 10K
TOYO VALVE
A tough valve resistant to heat, corrosion abrasion resistance. Use in areas with vapor, hot water, and embedded lines where safety is a priority.- Fichiers CAD 2D disponibles
à partir de∗ ： 96.97 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Vanne de régulation à vis, en fonte ductile, type 16K
TOYO VALVE
Use this valve in locations where a higher degree safety is required: for steam, high-temperature water, and buried lines, etc.
[Features]
· A tough valve with excellent resistance against heat, corrosion, and abrasion.- Fichiers CAD 2D disponibles
à partir de∗ ： 109.43 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Vanne de régulation à bride type 10K
TOYO VALVE
Stainless steel valve U Series. For general purpose and construction equipment.
[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.- Fichiers CAD 2D disponibles
à partir de∗ ： 152.78 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Forme du corps principal |
| Matériau du corps |
| Fluide applicable |
| Pression nominale |
| Côté alimentation, type de connexion |
| Côté alimentation, filetage nominal de tuyauterie |
| Côté alimentation, valeur nominale d'embase du tube |
| Côté commande, type de connexion |
| Côté commande, filetage nominal de tuyauterie |
| Côté commande, valeur nominale d'embase du tube |
| Forme de la poignée |
| Garniture du corps |
|
|
|
| |
| Marque | TOYO VALVE | TOYO VALVE | TOYO VALVE | TOYO VALVE |
| Série du produit | ||||
| CAD |
|
|
|
|
| à partir de∗ | 51.73 € Prix spécial *Prix unitaire/configuration de base En promotion | 96.97 € *Prix unitaire/configuration de base | 109.43 € *Prix unitaire/configuration de base | 152.78 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | Jour même | 7 jours | 8 jours | 9 jours |
| Forme du corps principal | Droit | Droit | Droit | Droit |
| Matériau du corps | Acier inoxydable moulé | Fonte ductile | Fonte ductile | Acier inoxydable moulé |
| Fluide applicable | Air | Air | Air | Air |
| Pression nominale | 10k | 10k | 16k | 10k |
| Côté alimentation, type de connexion | Rc (R) | Embase de tube | Rc (R) | Embase de tube |
| Côté alimentation, filetage nominal de tuyauterie | 1b ～ 3/8B | - | 1b ～ 3/4B | - |
| Côté alimentation, valeur nominale d'embase du tube | - | 1b ～ 3/4B | - | 1b ～ 3/4B |
| Côté commande, type de connexion | Rc (R) | Embase de tube | Rc (R) | Embase de tube |
| Côté commande, filetage nominal de tuyauterie | 1b ～ 3/8B | - | 1b ～ 3/4B | - |
| Côté commande, valeur nominale d'embase du tube | - | 1b ～ 3/4B | - | 1b ～ 3/4B |
| Forme de la poignée | Poignée ronde | Poignée ronde | Poignée ronde | Poignée ronde |
| Garniture du corps | - | Non fourni | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Forme du corps principal
-
Droit
-
Équerres
-
Droit
-
Matériau du corps
- Bronze
- Fonte
- Fonte ductile
- Acier inoxydable moulé
-
Fluide applicable
- Eau
- Air
- Huile
- Gaz
- Produit chimique
- Vapeur
-
Pression nominale
- 5k
- 10k
- 16k
- 20k
- Type 100
- Type 125
- Type 150
-
Côté alimentation, type de connexion
-
Côté alimentation, filetage nominal de tuyauterie
-
Côté alimentation, valeur nominale d'embase du tube
-
Côté commande, type de connexion
-
Côté commande, filetage nominal de tuyauterie
-
Côté commande, valeur nominale d'embase du tube
-
Forme de la poignée
-
Garniture du corps
Affiner la recherche en spécifiant le fabricant
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Vannes de régulation »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.