YANASE Disques（abrasive grain：Grain abrasif A）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Disque puissant en diamant 100 x 20 (15)
YANASE
[Features]
· Also suitable for removing black scale.
· The strong welding of high-quality diamond realizes clean cutting and longevity impossible in conventional products.
· Unlikely to clog, as it uses large diamond grains.
· Produces less dust than offset grindstones, etc.
· Unlike electrodeposited diamond, welding diamond puts diamond into welded metal, helping prevent clogging and ensuring long service life. The diamond protrusion is large, so polishing is coarser than that with electrodeposited diamond.
· For removing black scale, deburring aluminum diecast, chipping stone and concrete, shaving titanium, etc.à partir de∗ ： 83.05 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Disque de ponçage Happy à simple pression TOP 100xM10
YANASE
One-touch screw type. Delivers high performance at a low price.
[Features]
· One-touch screw type. High performance at a low cost.
· No clogging or burning.
· Quiet grinding noiseà partir de∗ ： 23.23 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
SG Cool-Top, 100 pièces
YANASE
[Features]
· Highly effective air cooling. Scorching is prevented to ensure a long operational life.
· Air enters by turning, and burning is reduced due to air cooling effect.
· Made as a block type to ensure that a new blade always comes out.
· Polishing cloth usage amount is the same as normal discsà partir de∗ ： 13.21 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Disque en tissu de polissage
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.
[Features]
· Paper disc for polishing.
· For polishing and pre-polishing general metals and wood materials, and cleaning metal surfaces.à partir de∗ ： 2.07 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
SG Yanase Top, 100 pièces
YANASE
Causes little vibration and noise for easy work, safe and efficient use.
[Features]
· W type where long and short sandpaper pieces are arranged alternately.
· Previously, when removing various types of beads, polishing with abrasive paper was done after grinding with an offset grinding stone, but now it is possible to grind and polish with a single piece.
· Ideal for medium polishing.
· Little clogging.
· Very limited scorching.à partir de∗ ： 11.94 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Type Uni Top 15 100x15
YANASE
[Features]
· Selectable from abundant abrasive grain and sizes.
· Supports metals as well as stone materials and glass.
· 4 types of abrasives are available.
· Select the product depending on the usage.
· The back-up base is elastic with relatively good deflection, making this product easy to use.
· Type 15: Paper length is 15 mm.à partir de∗ ： 9.31 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Mini disque TOP Uni
YANASE
The back-up base is elastic with relatively good deflection, making this product easy to use.
[Features]
· Discs manufactured with polishing cloth surrounding the periphery.
· Unlikely to clog or burn, preventing heat distortion and enabling continuous work.
· "Autogenous" properties ensure a constant surface roughness from start to finish.
· Suitable for removal of spatter and beads, metal deburring, rust removal, and polishing after welding.à partir de∗ ： 6.23 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Disque de ponçage Happi TOP
YANASE
[Features]
· Low cost yet high performance. Yanase's No. 1 disc.
· Compared to the UNI Top disc, its paper specification is economical and reduce costs.
· Abundant particle sizes for rough cutting to semi-finished grinding.
· No clogging and unlikely to burn.
· There is also a screw type one-touch type "One-Touch Happy TOP"à partir de∗ ： 10.18 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Type |
| work material |
| Outer diameter Dimensions(mm) |
| Inner Diameter Dimension(mm) |
| Thickness(mm) |
| Particle Size(#) |
| abrasive grain |
|
|
|
|
|
|
|
| |
| Marque | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Série du produit | ||||||||
| à partir de∗ | 83.05 € *Prix unitaire/configuration de base | 23.23 € *Prix unitaire/configuration de base | 13.21 € *Prix unitaire/configuration de base | 2.07 € *Prix unitaire/configuration de base | 11.94 € *Prix unitaire/configuration de base | 9.31 € *Prix unitaire/configuration de base | 6.23 € *Prix unitaire/configuration de base | 10.18 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | 5 jours | 6 jours | 5 jours | 5 jours | 8 jours | 10 jours | 5 jours | 5 jours |
| Type | Disque diamanté | Disque multilames | Disque multilames | Papier à poncer | Disque multilames | Disque multilames | Disque multilames | Disque multilames |
| work material | Matériau en cuivre[◎] / Matériau en pierre[◎] / Matériau en verre[◎] | Acier inoxydable[◎] | Acier inoxydable[◎] | Acier général[◎] / Acier inoxydable[○/◎] / Fonte[○/◎] | Acier inoxydable[◎] | Acier général[◎] / Acier inoxydable[○] | Acier général[◎] / Acier inoxydable[○/◎] / Fonte[◎] | Acier général[◎] / Acier inoxydable[○/◎] / Fonte[○] / Aluminium[○] |
| Outer diameter Dimensions(mm) | 100 | 100 | 100 | 30 | 100 | 100 | 58 | 100 ～ 180 |
| Inner Diameter Dimension(mm) | 15 | M10 | 15 | 10 | 15 | 15 | 10 | 15 ～ 22 |
| Thickness(mm) | - | - | - | - | - | - | - | - |
| Particle Size(#) | 40 | 100 | 100 | 60 ～ 320 | 100 | 80 | 60 ～ 320 | 40 ～ 400 |
| abrasive grain | Grain abrasif A | Grain abrasif A | Grain abrasif A | Grain abrasif A | Grain abrasif A | Grain abrasif A | Grain abrasif A | Grain abrasif A |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Type
- Disque multilames
- Disque diamanté
- Disque à maille
- Disque en tissu non tissé
- Disque en caoutchouc / uréthane dur
- Coton : Disque en sisal
- Disque en feutre
- Papier à poncer
- Structures / autres
-
work material
- Acier général
- Acier inoxydable
- Acier allié
- Fonte
- Matériau en cuivre
- Aluminium
- Matériau en pierre
- Matériau en verre
- Plastique
-
Outer diameter Dimensions(mm)
-
Inner Diameter Dimension(mm)
-
Thickness(mm)
-
Particle Size(#)
- 14
- 16
- 20
- 24
- 30
- 36
- 36 Equivalent
- 40
- 46
- 46, 80, 120, 180, 240, 360
- 50
- 60
- 80
- 80 Equivalent
- 100
- GC#100
- 120
- 120 Equivalent
- #120
- 150
- 180
- 180 Equivalent
- 220
- #220
- 240
- 240 Equivalent
- #240
- 280
- 320
- 320 Equivalent
- #320
- 360
- 400
- 400 Equivalent
- #400
- 500
- 600
- 600 Equivalent
- 800
- 800 Equivalent
- 1000
- 1000 Equivalent
- 1500
- 2000
-
abrasive grain
- Grain abrasif A
- Grain abrasif WA
- Grain abrasif C
- Grain abrasif Z
- Abrasif GZ
- Grain abrasif AA
- Grain abrasif SZ
- Abrasif E
- Grain abrasif céramique
- Grain abrasif au carbure de silicium
- Non applicable
- Grain abrasif TC
Affiner la recherche en spécifiant le fabricant
-
- ICHIGUCHI (16)
- NEWREGISTON (9)
- YANASE (8)
- SANKYO RIKAGAKU (5)
- KOVAX (3)
- NORITAKE COATED ABRASIVE (3)
- MURAKO (2)
- MIYUKI_SANGYO (2)
- NIPPON RESIBON (2)
- RESITON (2)
- RIKEN CORUNDUM (1)
- TRUSCO NAKAYAMA (1)
- COMPACT TOOL (0)
- KURE GRINDING WHEEL (0)
- LOBTEX (0)
- PFERD (0)
- SHINEX (0)
- NIHON SEIMITSU KIKAI KOSAKU (0)
- UHT (0)
- BELL STAR ABRASIVE MFG (0)
- NAKANISHI (0)
- TACT (0)
- MINITOR (0)
- NIHON KENSHI (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.