Écrous de roulement（Filetage nominal M：M12X1.0）

?* À propos du délai d'expédition et des prix

• 

  Écrou de roulement supérieur

  SUNCO

  [Shape] Round
  [Material] Steel
  [Surface Processing] None / Chromate Plating
  [Screw Type] Metric Coarse
  [Nominal of Thread] M12X1.0/M15X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0
  [Type] Lock Nut

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	13.27 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Écrous de roulement durs

  HARDLOCK INDUSTRY

  Bearing lock nut which employs a wedge-based design. Stability is ensure even for several dozen repetitions.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	8.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Écrou en U version fine

  SUNCO

  The friction ring is crimped and integrated with the nut, same as on the U Nut.
  
  [Features]
  · Lock nut for bearing.
  · The spring action of the friction ring creates friction on the male screw to cause a locking effect.
  · Can be fixed in an intermediate position.
  · Since it is all metal, it has excellent heat resistance.
  · No key groove processing on the shaft side.
  
  [Shape] Round
  [Material] SS400 equivalent / S45C equivalent / SUS304 equivalent
  [Screw type] Metric coarse
  [Nominal designation] M10 × 0.75 to M150 × 2.0
  [Type]Lock nut

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	3.77 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HLB

  SUNCO

  Uses both the top nut (convex type) and bottom nut (concave type).
  The top nut is perfectly circular with respect to the bolt, but the bottom nut has been eccentrically machined off-center with respect to the bolt.
  
  [Features] Since the lower nut is eccentric, tightening the upper nut will apply a lateral force due to the wedging action. Friction to this male thread prevents loosening.
  · Can be manually tightened to your desired position.
  · Can be used repeatedly.
  · HLB is for bearings.
  
  [Shape] Round
  [Material] SS400/S45C
  [Nominal of Thread] M15X1.0/M10X0.75/M12X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0/M110X2.0/M115X2.0/M120X2.0/M125X2.0/M130X2.0/M135X2.0/M140X2.0/M145X2.0/M150X2.0/M155X3.0/M160X3.0/M165X3.0/M170X3.0/M175X3.0/M180X3.0/M185X3.0/M190X3.0/M195X3.0/M200X3.0
  [Type] Lock Nut

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.72 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...