Type à embase

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Accouplement d'arbre flexible à embase SNS, manchons en caoutchouc

  KANEMITSU

  The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Accouplement d'arbre à embase souple FCL / FCLS

  NABEYA BI-TECH

  The most popular flexible shaft coupling used in Japan that complies with the JIS standard.
  
  [Features]
  · The most popular flexible shaft coupling used in Japan that complies with the JISB1452-1991 "Flange shape flexible shaft coupling."
  · A flexible structure that is made through combining a flange with a coupling bolt.
  · Easy to attach.
  · Easy to replace the bush by just removing the coupling bolt, which makes maintenance and preservation easy.
  · Absorbs misalignment such as eccentricity and declination, and absorbs screw vibrations to prevent noise.
  · Does not transmit the thrust load.
  · There are two types, namely the FCL cast iron type and the FCLS carbon steel type.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	71.78 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Accouplement d'arbre à embase rigide KCL / KCLS

  NABEYA BI-TECH

  [Features]
  · A shaft coupling with a solid type structure that is based on the JISB1451-1991 "Flange shape fixating axial coupling."
  · Can match the set mark on the flange outer peripheral face, and can be easily assembled by just tightening the reamer bolt.
  · There are two types, namely the cast iron type and the carbon steel type.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	110.88 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplement d'arbre flexible à bride SNS, jeux de pièces d'accouplement

  KANEMITSU

  The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres souples, type à embase SNS [CL]

  KANEMITSU

  JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
  
  [Features]
  · Compliant with JIS B 1452.
  · Compatible with nominal diameters of between ø90 and ø630.
  · Material FC200

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	85.29 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres souples, modèle à embase SNS [SCL]

  KANEMITSU

  JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
  
  [Features]
  · Satisfies all of the requirements of a flexible shaft coupling.
  · 1. Smoothly transmits the power from the shaft.
  · 2. Does not transmit the machine vibration or shaft vibration to the other side.
  · 3. Does not release any power (thrust) from pushing the shaft from the shaft coupling.
  · 4. The rotary shaft can be turned by hand from the outer side while being directly connected.
  · 5. The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
  · 6. Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.
  · * A simple structure that provides complete flexibility.
  · The structure is comprised of a coupler body, coupler bolt, and rubber bushes which make it extremely easy to attach and remove.
  · The rubber bushes are made of polymer materials and have flexibility, vibration resistance, and complete flexibility.
  · * Has compatibility that is demanded anywhere at anytime

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	199.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Boulons d'accouplement d'arbre monté, modèle à embase SNS

  KANEMITSU

  SS400 is used as the bolt and nut material, and SWRH62 is used as the spring washer material.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.95 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements K-7, série F

  KAYSEVEN

  A product that absorbs eccentricity, has no reaction force, and does not require eccentric alignment. Used with various types of pumps, blowers, agitators, NC and MC manufacturing machinery, and machinery used in the textile, agriculture, construction, and mining industries.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.53 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Accouplements d'arbres souples [CL] modèle à embase SNS (côté montage du moteur)

  KANEMITSU

  JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	35.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres souples [SCL] modèle à embase SNS (côté montage de la pompe)

  KANEMITSU

  JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
  
  [Features]
  · Satisfies all of the requirements of a flexible shaft coupling.
  · Smoothly transmits the power from the shaft.
  · Does not transmit the machine vibration or shaft vibration to the other side.
  · Does not release any power (thrust) from pushing the shaft from the shaft coupling.
  · The rotary shaft can be turned by hand from the outer side while being directly connected.
  · The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
  · Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.38 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres fixes, modèle à embase SNS [RCL]

  KANEMITSU

  JIS B1451 standard. Has the same outer diameter size as the flexible shaft coupling but with a higher transmission capacity, and it can be reliably connected using a bolt. A line up with a nominal diameter of ø112 to ø560, and uses FC200 as the material

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	105.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 8545

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	75.99 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 11080

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.
  
  [Features]
  · The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
  · Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
  · The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
  · It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
  · Can be used without a key with light loads. Does not require a cover or set screw.
  · Pulley replacement is easy and can be used as a substitute for a transmission.
  · Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
  · Easy to design using millimeter dimensions.
  · A design that is based on a bushing type used in the US and Europe.·

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	108.39 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 13070

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	168.96 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres souples [CL] modèle à embase SNS (côté montage de la pompe)

  KANEMITSU

  JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.45 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Accouplements d'arbres fixes, type à embase SNS [SRCL]

  KANEMITSU

  Compatible with use in high ranges of circumferential speeds. Standardized in nominal diameters of ø112 to ø355. A forged product that uses S35C as the material

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	267.30 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 3622

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	28.38 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 4225

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.
  
  [Features]
  · No need to create shaft holes or key grooves.
  · It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
  · Extremely strong grip and can be used without a key with light loads.
  · Does not require a cover or set screw.
  · Changes to the shaft hole diameter and rpm are extremely smooth.
  · Pulley replacement is easy and can be used as a substitute for a transmission.
  · Eliminates outer diameter vibrations at the center of the shaft hole.
  · Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
  · Easy to design using millimeter dimensions.
  · A design that is based on a bushing type that has a strong track record in the US and Europe.
  · Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	30.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 5035

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	41.60 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 6340

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.
  
  [Features]
  · No need to create shaft holes or key grooves.
  · It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
  · Extremely strong grip and can be used without a key with light loads.
  · Does not require a cover or set screw.
  · Changes to the shaft hole diameter and rpm are extremely smooth.
  · Pulley replacement is easy and can be used as a substitute for a transmission.
  · Eliminates outer diameter vibrations at the center of the shaft hole.
  · Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
  · Easy to design using millimeter dimensions.
  · A design that is based on a bushing type that has a strong track record in the US and Europe.
  · Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	60.92 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 11055

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	133.83 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Manchon STB 14090

  KANEMITSU

  Millimeter dimensions with no need to create shaft holes or key grooves.
  
  [Features]
  · No need to create shaft holes or key grooves.
  · It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
  · Extremely strong grip and can be used without a key with light loads.
  · Does not require a cover or set screw.
  · Changes to the shaft hole diameter and rpm are extremely smooth.
  · Pulley replacement is easy and can be used as a substitute for a transmission.
  · Eliminates outer diameter vibrations at the center of the shaft hole.
  · Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
  · Easy to design using millimeter dimensions.
  · A design that is based on a bushing type that has a strong track record in the US and Europe.
  · Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	263.19 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

Loading...